Page 923 - 5G Basics - Core Network Aspects
P. 923

Transport aspects                                              2


            12.3.3.2.1    O-SIGNATURE

            The O-SIGNATURE message indicates to the FTU-R all main transmission parameters to be used during the
            initialization.

                                            Table 12-20 – O-SIGNATURE message

               Field                              Field name                                   Format

                 1     Message descriptor                                               Message code
                 2     Supported subcarriers in the downstream direction (SUPPORTEDCARRIERSds
                       set)                                                             TX and RX bands

                 3     Supported subcarriers in the upstream direction (SUPPORTEDCARRIERSus   descriptor
                       set)

                 4     Downstream transmit PSD mask (PSDMASKds)
                 5     Upstream transmit PSD mask (PSDMASKus)                           PSD descriptor
                 6     Channel discovery downstream PSD (CDPSDds)
                 7     Parameters for UPBO reference PSD (UPBOPSD)                      Three bytes
                 8     Downstream minimum SNR margin (MINSNRMds)                        Two bytes
                 9     Downstream target SNR margin (TARSNRMds)                         Two bytes
                10     Downstream transmit window length (ds)                          One byte

                11     Initial value of the time gap Tg1'                               Two bytes
                12     Upstream probe sequence length (Nprobe_us)                       One byte
                13     Upstream probe sequence descriptor                               Variable
                14     Reference superframe count                                       Two bytes
                15     Downstream probe sequence length                                 One byte
                16     Downstream probe sequence descriptor                             Variable
                17     Time marker indicating the start of upstream probe sequence      One byte
                18     Time marker indicating the start of downstream probe sequence    One byte
                19     Number of upstream data symbols (sus) to be used during the initialization   One byte

                20     Upstream RMC offset                                              One byte
                21     UPBO reference electrical length (UPBOKLREF)                     One byte
                22     Number of downstream initialization data symbols for SNR estimation (Sds_snr)  One byte
                23     Upstream maximum aggregate transmit power (MAXATPus)             2 bytes

            Field 1 "Message descriptor" is a unique one-byte code (0016) that identifies the message. See Table 12-7
            for a complete list of codes.

            Field 2 "Supported subcarriers in the downstream direction (SUPPORTEDCARRIERSds)" conveys indices of
            all subcarriers that are allocated for transmission in the downstream direction, expressed as a set of bands.
            Each band is a group of SUPPORTEDCARRIERSds with consecutive indices. The field shall be formatted as
            "band descriptor", using the format shown in Table 12-21.
            Field 3 "Supported subcarriers in the upstream direction (SUPPORTEDCARRIERSus)" conveys indices of all
            subcarriers that are allocated for transmission in the upstream direction, expressed as a set of bands. Each
            band is a group of SUPPORTEDCARRIERSus with consecutive indices. The field shall be formatted as "bands
            descriptor", using the format shown in Table 12-21.







                                                                                                         913
   918   919   920   921   922   923   924   925   926   927   928