Page 91 - ITU Kaleidoscope 2016

ICTs for a Sustainable World

REFERENCES

[1] T. Morioka, “New generation optical infrastructure
technologies: “EXAT Initiative” towards 2020 and beyond,”
in Proc. OECC’09, FT4, 2009.
[2] P. J. Winzer, “Optical networking beyond WDM,” IEEE
Photon. J., vol. 4, no. 2, pp. 647-651, 2012.
[3] A. Turukhin et al., “105.1 Tb/s power-efficient transmission
over 14,350 km using a 12-core fiber,” in Proc. OFC’16,
Th4C.1, 2016.
[4] K. Hogari et al., “Novel optical fiber cables with ultrahigh
density,” J. Lightwave Technol., vol. 26, no. 17, pp. 3104-
3109, 2008.
[5] T. Sakamoto et al., “Low-loss and low-DMD few-mode
multi-core fiber with highest core multiplicity factor,” in Proc.
OFC'16, Th5A.2, 2016.
[6] S. Inao et al., “High density multicore-fiber cable,” in Proc.
IWCS’79, p. 370-384, 1979.
[7] G. Le. Noane et al., “Ultra high density cables using a new
concept of bunched multicore monomode fibers: A key for
the future FTTH networks,” in Proc. IWCS’94, p. 203-210,
1994.
[8] M. Tachikura et al., “Improved theoretical estimation of
mechanical reliability of optical fibers,” in Proc. SPIE, vol.
5623, pp. 622-629, 2005.
[9] IEC TR 62048, “Optical fibre – Reliability – Power law
theory,” Ed. 3, Oct. 2014.
[10] Y. Goto et al., “Influence of cladding thickness on
transmission loss and its relationship with multicore fiber
structure,” J. Lightwave Technol., vol. 33, no. 23, pp. 4942-
4949, 2015.
[11] M. Koshiba et al., “Multi-core fiber design and analysis:
coupled-mode theory and coupled-power theory,” Opt.
Express, vol. 19, no. 26, pp. B102-B111, 2011.
[12] T. Hayashi et al., “Low-crosstalk and low-loss multi-core
fiber utilizing fiber bend,” in Proc. OFC'11, OWJ3, 2011.
[13] S. Matsuo et al., “Large-effective-area ten-core fiber with
cladding diameter of about 200mm,” Opt. Lett., vol. 36, no.
23, pp. 4626-4628, 2011.
[14] J. Sakaguchi et al., “19-core fiber transmission of
19x100x172-Gb/s SDM-WDM-PDM-QPSK signals at
305Tb/s,” in Proc. OFC'12, PDP5C.1, 2012.
[15] M.J. Li et al., “Multicore fiber for optical interconnect
applications,” in Proc. OECC'12, 5E4-2, 2012.
[16] S. Matsuo et al., “12-core fiber with one ring structure for
extremely large capacity transmission,” Opt. Express, vol. 20,
no. 27, pp. 28398-28408, 2012.
[17] Y. Amma et al., “High-density multicore fiber with
heterogeneous core arrangement,” in Proc. OFC'15, Th4C.4,
2015.
[18] T. Mizuno et al., “32-core dense SDM unidirectional
transmission of PDM-16QAM signals over 1600 km using
crosstalk-managed single-mode heterogeneous multicore
transmission line,” in Proc. OFC'16, Th5C.3, 2016.
[19] T. Matsui et al., “Design of 125 mm cladding multi-core fiber
with full-band compatibility to conventional single-mode
fiber,” in Proc. ECOC’15, We.1.4.5, 2015.
[20] R. Nagase et al., “MU-type multicore fiber connector,” IEICE
Electron., vol. E96-C, no. 9, pp. 1173-1177, 2013.
[21] K. Saito et al., “Multi-core fiber based pluggable add/drop
link using rotational connector,” in Proc. OFC’15, M2B.2,
2015.
[22] K. Saito et al., “Side-view based angle alignment technique
for multi-core fiber,” in Proc. OFC’16, M3F.3, 2016.

– 73 –