|
1.
|
Clear description of the referenced document:
|
|
|
|
Name:
|
IEEE 802.3-2002
|
|
Title:
|
IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - specific requirements - Part 3, Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications, 2002.
|
|
|
2.
|
Status of approval:
|
|
|
Normative.
|
|
3.
|
Justification for the specific reference:
|
|
|
It is desired to include this material by reference rather than incorporation for the following reasons:
a. Due to the complexity of the material and it's relationship to material in other clauses of the referenced document. While this material is extensive, it is only a portion of a large document. Having the material in context will aid in understanding.
b. It is anticipated that there will be copyright difficulties with including the full text of the referenced material.
|
|
4.
|
Current information, if any, about IPR issues:
|
|
|
Information on IEEE standards can be found at http://standards.ieee.org/db/patents/index.html
|
|
5.
|
Other useful information describing the "Quality" of the document:
|
|
|
The document is in existence, in previous versions, from 1985. It is very widely used technology.
|
|
6.
|
The degree of stability or maturity of the document:
|
|
|
It is an approved IEEE standard. The 2002 revision was published on March 2002.
|
|
7.
|
Relationship with other existing or emerging documents:
|
|
|
This specification is related to the 802.3 suite of standards developed by the IEEE.
|
|
8.
|
Any explicit references within that referenced document should also be listed:
|
|
|
[1] ANSI T1.601-1992, Telecommunications-Integrated Services Digital Network (ISDN)-Basic Access Interface for Use on Metallic Loops for Application on the Network Side of the NT (Layer 1 Specification)./
[2] ANSI T1.605-1991, Telecommunications-Integrated Services Digital Network (ISDN)-Basic Access Interface for S and T Reference Point (Layer 1 Specification)./
[3] ANSI X3.237-1995, Rev 2.1 (1 January 1995), FDDI Low-Cost Fibre Physical Layer-Medium Dependent (LCF-PMD) (ISO/IEC CD 9314-9)./
[4] ANSI X3.263-1995, Revision 2.2 (1 March 1995), FDDI Twisted Pair-Physical Medium Dependent (TPPMD) (ISO/IEC CD 9314-10)./
[5] ANSI/TIA/EIA-568-A, Commercial Building Telecommunications Cabling Standard. CISPR 22: 1993, Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment/
[6] IEC 60060 (all parts), High-voltage test techniques./
[7] IEC 60068, Basic environmental testing procedures./
[8] IEC 60096-1: 1986, Radio-frequency cables, Part 1: General requirements and measuring methods and Amd. 2:1993/
[9] IEC 60169-8: 1978 and -16: 1982, Radio-frequency connectors, Part 8: R.F. coaxial connectors with inner diameter of outer conductor 6.5 mm (0.256 in) with bayonet lock Characteristic impedance 50 ohms (Type BNC); Part 16: R.F. coaxial connectors with inner diameter of outer conductor 7 mm (0.276 in) with screw coupling-Characteristic impedance 50 ohms (75 ohms) (Type N)./
[10] IEC 60603-7: 1990, Connectors for frequencies below 3 MHz for use with printed boards, Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality./
[11] IEC 60793-1: 1995, Optical fibres-Part 1: Generic specification./
[12] IEC 60793-2: 1992, Optical fibres-Part 2: Product specifications./
[13] IEC 60794-1: 1996, Optical fibre cables-Part 1: Generic specification./
[14] IEC 60794-2: 1989, Optical fibre cables-Part 2: Product specifications./
[15] IEC 60807-2: 1992, Rectangular connectors for frequencies below 3 MHz, Part 2: Detail specification for a range of connectors with assessed quality, with trapezoidal shaped metal shells and round contacts-Fixed solder contact types./
[16] IEC 60807-3: 1990, Rectangular connectors for frequencies below 3 MHz, Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contacts Removable crimp contact types with closed crimp barrels, rear insertion/rear extraction./
[17] IEC 60825-1: 1993, Safety of laser products-Part 1: Equipment classification, requirements and user's guide./
[18] IEC 60825-2: 1993, Safety of laser products-Part 2: Safety of optical fibre communication systems./
[19] IEC 60874-1: 1993, Connectors for optical ifbres and cables-Part 1: Generic specification./
[20] IEC 60874-2: 1993, Connectors for optical fibres and cables-Part 2: Sectional specification for fibre optic connector, Type F-SMA./
[21] IEC 60874-10: 1992, Connectors for optical fibres and cables-Part 10: Sectional specification, Fibre optic connector type BFOC/2,5./
[22] IEC 60950: 1991, Safety of information technology equipment./
[23] IEC 61000-4-3, Electromagnetic Compatibility (EMC)-Part 4: Testing and measurement techniques-Section 3: Radiated, radio-frequency, electromagnetic field immunity test./
[24] IEC 61076-3-101: 1997, Connectors with assessed quality, for use in dfic., low-frequency analogue and in digital high-speed data applications-Part 3: Rectangular connectors-Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1.27 mm & 2.54 mm centre-line./
[25] IEC 61076-3-103 (48B/574/NP), Detail specification for rectangular connectors, with assessed quality, 6 and 8 way, .xed and free shielded connectors with ribbon contacts for high speed data applications./
[26] IEC 61196-1: 1995, Radio-frequency cables-Part 1: Generic specification-General, definitions, requirements and test methods./
[27] IEC 61754-4: 1997, Fibre optic connector interfaces-Part 4: Type SC connector family./
[28] IEEE Std 802.1F-1993™ (Reaff 1998), IEEE Standards for Local and Metropolitan Area Networks: Common Definitions and Procedures for IEEE 802 Management Information./
[29] IEEE P802.1Q/D11™ (July 30, 1998), Draft Standard for Local and Metropolitan Area Networks: Virtual Bridged Local Area Networks./
[30] IETF RFC 1155, Structure and Identification of Management Information for TCP/IP-based Internets, Rose, M., and K. McCloghrie, May 1990/
[31] IETF RFC 1157, A Simple Network Management Protocol (SNMP),/
Case, J., Fedor, M., Schoffstall, M., and J. Davin, May 1990/
[32] IETF RFC 1212, Concise MIB Definitions, Rose, M., and K. McCloghrie, March 1991/
[33] IETF STD 17, RFC 1213, Management Information Base for Network Management of TCP/IP-based internets: MIB-II, McCloghrie K., and M. Rose, Editors, March 1991/
[34] IETF RFC 1215, A Convention for Defining Traps for use with the SNMP, M. Rose, March 1991./
[35] IETF RFC 1901, Introduction to Community-based SNMPv2, Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, January 1996/
[36] IETF RFC 1902, Structure of Management Information for Version 2 of the Simple Network Management Protocol (SNMPv2), Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, January 1996./
[37] IETF RFC 1903, Textual Conventions for Version 2 of the Simple Network Management Protocol (SNMPv2), Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, January 1996./
[38] IETF RFC 1904, Conformance Statements for Version 2 of the Simple Network Management Protocol (SNMPv2), Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, January 1996./
[38] IETF RFC 1905, Protocol Operations for Version 2 of the Simple Network Management Protocol (SNMPv2), Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, January 1996./
[39] IETF RFC 1906, Transport Mappings for Version 2 of the Simple Network Management Protocol (SNMPv2), Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, January 1996./
[40] IETF RFC 2233, The Interfaces Group MIB using SMIv2, McCloghrie, K., and F. Kastenholz, November 1997/
[41] IETF RFC 2271, An Architecture for Describing SNMP Management Frameworks, Harrington, D., Presuhn, R., and B. Wijnen, January 1998./
[42] IETF RFC 2272, Message Processing and Dispatching for the Simple Network Management Protocol (SNMP), Case, J., Harrington D., Presuhn R., and B. Wijnen, January 1998/
[43] IETF RFC 2273, SNMPv3 Applications, Levi, D., Meyer, P., and B. Stewart, January 1998./
[44] IETF RFC 2274, User-based Security Model (USM) for version 3 of the Simple Network Management Protocol (SNMPv3), Blumenthal, U., and B. Wijnen, January 1998/
[45] IETF RFC 2275, View-based Access Control Model (VACM) for the Simple Network Management Protocol (SNMP), Wijnen, B., Presuhn, R., and K. McCloghrie, January 1998./
[46] ISO/IEC 15802-1: 1995, Information technology-Telecommunications and information exchange between systems-Local and metropolitan area networks-Common specifications-Part 1: Medium Access Control (MAC) service definition./
[47] ISO/IEC 2382-9: 1995, Information technology-Vocabulary-Part 9: Data communication./
[48] ISO/IEC 7498-1: 1994, Information technology-Open Systems Interconnection-Basic Reference Model: The Basic Model./
[49] ISO/IEC 7498-4: 1989, Information processing systems-Open Systems Interconnection-Basic Reference Model-Part 4: Management Framework./
[50] ISO/IEC 8824: 1990, Information technology-Open Systems Interconnection-Specification of Abstract Syntax Notation One (ASN.1)./
[51] ISO/IEC 8825: 1990, Information technology-Open Systems Interconnection-Specification of basic encoding rules for Abstract Syntax Notation One (ASN.1)./
[52] ISO/IEC 9314-1: 1989, Information processing systems-Fibre Distributed Data Interface (FDDI)-Part 1: Token Ring Physical Layer Protocol (PHY)./
[53] ISO/IEC 9314-2: 1989, Information processing systems-Fibre Distributed Data Interface (FDDI)-Part 2: Token Ring Media Access Control (MAC)./
[54] ISO/IEC 9314-3: 1990, Information processing systems-Fibre Distributed Data Interface (FDDI)-Part 3: Physical Layer Medium Dependent (PMD)./
[55] ISO/IEC 9646-1: 1994, Information technology-Open Systems Interconnection-Conformance testing methodology and framework-Part 1: General concepts./
[56] ISO/IEC 9646-2: 1994, Information technology-Open Systems Interconnection-Conformance testing methodology and framework-Part 2: Abstract test suite specification./
[57] ISO/IEC 10040: 1992, Information technology-Open Systems Interconnection-Systems management overview./
[58] ISO/IEC 10164-1: 1993, Information technology-Open Systems Interconnection Systems management -Part 1: Object Management Function./
[59] ISO/IEC 9314-1: 1989, Information processing systems-Fibre Distributed Data Interface (FDDI)-Part 1: Token Ring Physical Layer Protocol (PHY)./
[60] ISO/IEC 9314-2: 1989, Information processing systems-Fibre Distributed Data Interface (FDDI)-Part 2: Token Ring Media Access Control (MAC)./
[61] ISO/IEC 9314-3: 1990, Information processing systems-Fibre Distributed Data Interface (FDDI)-Part 3: Physical Layer Medium Dependent (PMD)./
[62] ISO/IEC 9646-1: 1994, Information technology-Open Systems Interconnection Conformance testing methodology and framework-Part 1: General concepts./
[63] ISO/IEC 9646-2: 1994, Information technology-Open Systems Interconnection-Conformance testing methodology and framework-Part 2: Abstract test suite specification./
[64] ISO/IEC 10040: 1992, Information technology-Open Systems Interconnection-Systems management overview./
[65] ISO/IEC 10164-1: 1993, Information technology-Open Systems Interconnection-Systems management -Part 1: Object Management Function./
[66] ISO/IEC 10165-1: 1993, Information technology-Open Systems Interconnection-Management information services-Structure of management information-Part 1: Management Information Model./
[67] ISO/IEC 10165-2: 1992, Information technology-Open Systems Interconnection-Structure of management information: Definition of management information./
[68] ISO/IEC 10165-4: 1992, Information technology-Open Systems Interconnection-Management information services-Structure of management information-Part 4: Guidelines for the definition of managed objects./
[69] ISO/IEC 10742: 1994, Information technology-Telecommunications and information exchange between systems-Elements of management information related to OSI Data Link Layer standards./
[70] ISO/IEC 11801: 1995, Information technology-Generic cabling for customer premises./
[71] ISO/IEC 15802-2: 1995 [ANSI/IEEE Std 802.1B-1992™ and IEEE Std 802.1k-1993™], Information technology-Telecommunications and information exchange between systems-Local and metropolitan area networks-Common specifications-Part 2: LAN/MAN Management./
[72] ISO/IEC 15802-3: 1998 [IEEE Std 802.1D™, 1998 Edition), Information technology-Telecommunications and information exchange between systems-Local and metropolitan area networks-Common specifications-Part 3: Media Access Control (MAC) bridges./
[73] ITU-T Recommendation G.957 (1995) Digital line systems-Optical interfaces for equipments and systems relating to the synchronous digital hierarchy./
[74] ITU-T Recommendation I.430 (1995), Basic user-network interface-Layer 1 specification. MATLAB Matrix Laboratory Software
|
|
9.
|
Qualification of
IEEE:
|
|
|
The IEEE was recognized under the provisions of ITU-T Recommendation A.5 on 1 November 1999. Qualifying information is on file with TSB.
|
|
10.
|
Other (for any supplementary information):
|
|
|
All standards are available on-line. See http://www.ieee802.org/.
|
|
