Page 958 - 5G Basics - Core Network Aspects
P. 958

2                                                 Transport aspects


            Bit b2 defines the status of NTR frequency synchronization:
            –       If b2=1, PMD sample clock is locked to the NTR
            –       If b2=0, PMD sample clock is independent from the NTR

            12.3.4.2.4  R-ACK 1
            R-ACK 1 is a one-byte SOC message that acknowledges correct reception of the O-TPS message. The format
            shall be as defined in Table 12-47.

                                              Table 12-47 – R-ACK 1 message

                 Field                    Field name                                 Format
                   1       Message descriptor                       Message code

            Field 1 "Message descriptor" is a unique one-byte code (8716) that identifies the message. See Table 12-7
            for a complete list of codes.

            12.3.4.2.5  O-PMS
            The  O-PMS  message  conveys  the  initial  PMS-TC  parameter  settings  that  shall  be  used  in  the  upstream
            direction during showtime. The list of parameters carried by the O-PMS message is shown in Table 12-48.

                                               Table 12-48 – O-PMS message
                 Field                     Field name                                 Format
                  1        Message descriptor                         Message code

                  2        DPus                                       Data path descriptor
                  3        RMCPus                                     US RMC path descriptor
                  4        RMCPds                                     DS RMC path descriptor
                  5        Upstream ACK window shift                  One byte
                  6        Upstream MNDSNOI                           One byte

            Field 1 "Message descriptor" is a unique one-byte code (0916) that identifies the message. See Table 12-7
            for a complete list of codes.

            Field  2  "DPus"  is  a  field  that  contains  the  PMS-TC  parameters  required  for  data  path  in  the  upstream
            direction. The "Data path descriptor" format specified in Table 12-49 shall be used. All values in Table 12-49
            are unsigned integers.


                                             Table 12-49 – Data path descriptor

                  Byte        Field        Format                            Description
                 1 and 2    BD        Two bytes        Contains the value of BD for the data symbol

                 3 and 4    BDR       Two bytes        Contains the value of BDR for the RMC symbol
                   5        RD        One byte         Contains the value of RFEC for the data path
                   6        ND        One byte         Contains the value of NFEC for the data path
                   7        Q         One byte         Number of FEC codewords per DTU

            Field  3  "RMCPus"  is  a  field  that  contains  the  PMS-TC  parameters  required  for  RMC  in  the  upstream
            direction. The "RMC path descriptor" format specified in Table 12-50 shall be used. All values in Table 12-50
            are unsigned integers.









            948
   953   954   955   956   957   958   959   960   961   962   963