Page 756 - 5G Basics - Core Network Aspects
P. 756
2 Transport aspects
Table 9-19 – Valid configurations
Parameter Capability
16
NDR_max The valid values are all multiples of 96 kbit/s from ETR_min + 96 kbit/s to (2 -1) × 96 kbit/s.
16
ETR_min The valid values are all multiples of 96 kbit/s from 0 kbit/s to (2 -1) × 96 kbit/s (Note).
INP_min_shine The valid values are all integers from 0 to 520.
SHINEratio The valid values are all multiples of 0.001 from 0 to 0.1.
INP_min_rein The valid values are all integers from 0 to 63.
iat_rein_flag The valid values are 0, 1,2 and3.
delay_max The valid values are all multiples of 0.25 ms from 1 to 16 ms.
rnratio_min The valid values are all multiples of 1/32 from zero to 8/32 that also satisfy the constraints
of clause 9.3.
NOTE – Valid range of ETR_min includes values that are less than the minimum value of L2.1_ETR_min (see clause 13.4.1.5.1).
9.8.2.3 Mandatory configurations
The mandatory configurations to support are a subset of the valid configurations. They shall consist of the
configuration of each control parameter with one of their mandatory values specified in the Table 9-20.
Table 9-20 – Mandatory configurations
Parameter Capability
NDR_max All valid values shall be supported.
ETR_min All valid values shall be supported.
INP_min_shine All valid values shall be supported.
SHINEratio All valid values shall be supported.
INP_min_rein All valid values shall be supported.
iat_rein_flag All valid values shall be supported.
delay_max All valid values shall be supported.
rnratio_min All valid values shall be supported.
9.8.2.4 Derived parameters
Derived framing parameters: parameters that can be computed using the primary parameters as input. The
derived parameters can be used to verify data rates or to identify additional constraints on the validity of
the primary parameters. The derived parameters assume full utilization of the logical frame (i.e., no idle or
quiet symbols, and all symbol positions configured for the NOI).
746