Page 673 - 5G Basics - Core Network Aspects

Transport aspects 2

Annex X – Operation without multi-line coordination intended for a crosstalk-free environment

X.1 Scope
X.2 Definitions
X.3 Abbreviations and acronyms
X.4 Reference model(s)
X.5 Profiles
X.6 Dynamic time assignment (DTA)

X.7 Initialization messages
X.8 Discontinuous operation
X.9 On-line reconfiguration
X.10 Initialization
X.11 Low power states

X.12 Adaptation to the coaxial cable medium
Annex Y – Upstream dynamic resource reports
Annex Z – Cross-layer traffic monitoring functions and link state control
Z.0 Introduction

Z.1 Definition of Terms
Z.2 Abbreviations and acronyms
Z.3 Reference models
Z.4 Generic traffic monitoring functions
Z.5 Generic information flows

Z.6 Link state specific functions
Z.7 Link state management and reporting parameters
Appendix I – Wiring topologies and reference loops
I.1 Wiring topologies

I.2 Reference loops
Appendix II – Example OLR use cases
II.1 Transmitter initiated gain adjustment (TIGA)

Appendix III – Motivation of MTBE accelerated test
Appendix IV
Appendix V – Retransmission buffer size and the achievable bit-rate

V.1 Case 1: NSYMret+NSYMack+1 ≤ Mus
V.2 Case 2: NSYMret+NSYMack+1≥Mus
V.3 Case 3: Lower bound for the achievable net data rate
V.4 Memory size example

663