| G.100 | 
[Withdrawn] Definitions used in Recommendations on general characteristics of international telephone connections and circuits
		 
 | 
| G.100.1 | The use of the decibel and of relative levels in speechband telecommunications
		 
 | 
| G.101 | The transmission plan
		 
 | 
| G.102 | Transmission performance objectives and Recommendations
		 
 | 
| G.103 | Hypothetical reference connections
		 
 | 
| G.105 | Hypothetical reference connection for crosstalk studies
		 
 | 
| G.107 | The E-model: a computational model for use in transmission planning
		 
 | 
| G.107.1 | Wideband E-model
		 
 | 
| G.107.2 | Fullband E-model
		 
 | 
| G.108 | Application of the E-model: A planning guide
		 Covering note, November 2000: Erratum
 | 
| G.108.1 | Guidance for assessing conversational speech transmission quality effects not covered by the E-model
		 
 | 
| G.108.2 | Transmission planning aspects of echo cancellers
		 
 | 
| G.109 | Definition of categories of speech transmission quality
		 
 | 
| G.111 | Loudness ratings (LRs) in an international connection
		 
 | 
| G.113 | Transmission impairments due to speech processing
		 
 | 
| G.114 | One-way transmission time
		 
 | 
| G.Imp114 | G.114 Implementors' Guide
		 
 | 
| G.115 | Mean active speech level for announcement and speech synthesis systems
		 
 | 
| G.116 | Transmission performance objectives applicable to end-to-end international connections
		 
 | 
| G.117 | Transmission aspects of unbalance about earth
		 
 | 
| G.120 | Transmission characteristics of national networks
		 
 | 
| G.121 | Loudness ratings (LRs) of national systems
		 
 | 
| G.122 | Influence of national systems on stability and talker echo in international connections
		 
 | 
| G.123 | 
[Withdrawn] Circuit noise in national networks
		 The content of this Recommendation is now covered by ITU-T G.120
 | 
| G.125 | 
[Withdrawn] Characteristics of national circuits on carrier systems
		 The content of this Recommendation is now covered by ITU-T G.120
 | 
| G.126 | Listener echo in telephone networks
		 
 | 
| G.131 | Talker echo and its control
		 
 | 
| G.132 | 
[Withdrawn] Attenuation distortion
		 The content of this Recommendation is now covered by ITU-T G.120
 | 
| G.133 | 
[Withdrawn] Group-delay distortion
		 The content of this Recommendation is now covered by ITU-T G.120
 | 
| G.134 | 
[Withdrawn] Linear crosstalk
		 The content of this Recommendation is now covered by ITU-T G.120
 | 
| G.135 | 
[Withdrawn] Error on the reconstituted frequency
		 The content of this Recommendation is now covered by ITU-T G.120
 | 
| G.136 | Application rules for Automatic Level Control Devices
		 Covering note, May 2000: Erratum
 | 
| G.141 | 
[Withdrawn] Attenuation distortion
		 The content of this Recommendation is now covered by ITU-T G.120
 | 
| G.142 | Transmission characteristics of exchanges
		 
 | 
| G.143 | 
[Withdrawn] Circuit noise and the use of compandors
		 Deleted because it deals with compandor transmission aspects, which use is no more recommended in networks
 | 
| G.151 | 
[Withdrawn] General performance objectives applicable to all modern international circuits and national extension circuits
		 The content of this Recommendation is now covered by ITU-T G.120
 | 
| G.152 | 
[Withdrawn] Characteristics appropriate to long-distance circuits of a length not exceeding 2500 km
		 The content of this Recommendation is now covered by ITU-T G.120
 | 
| G.153 | 
[Withdrawn] Characteristics appropriate to international circuits more than 2500 km in length
		 The content of this Recommendation is now covered by ITU-T G.120
 | 
| G.160 | Voice enhancement devices
		 
 | 
| G.161 | Interaction aspects of signal processing network equipment
		 
 | 
| G.161.1 | Do-no-harm testing
		 
 | 
| G.162 | 
[Withdrawn] Characteristics of compandors for telephony
		 Deleted because it deals with compandor transmission aspects, which use is no more recommended in networks
 | 
| G.163 | 
[Withdrawn] Call concentrating systems
		 Deleted after its content became technically out of date
 | 
| G.164 | Echo suppressors
		 
 | 
| G.165 | Echo cancellers
		 
 | 
| G.166 | 
[Withdrawn] Characteristics of syllabic compandors for telephony on high capacity long distance systems
		 Deleted because it deals with compandor transmission aspects, which use is no more recommended in networks
 | 
| G.167 | 
[Withdrawn] Acoustic echo controllers
		 
 | 
| G.168 | Digital network echo cancellers
		 
 | 
| G.Imp168 | Implementors' Guide for ITU-T Recommendation G.168
		 
 | 
| G.169 | Automatic level control devices
		 
 | 
| G.171 | 
[Withdrawn] Transmission plan aspects of privately operated networks
		 Deleted because it refers to obsolete Recommendations. For guidance on transmission planning or on private/public network interconnection, refer to ITU-T G.175 and G.108
 | 
| G.172 | Transmission plan aspects of international conference calls
		 
 | 
| G.173 | Transmission planning aspects of the speech service in digital public land mobile networks
		 
 | 
| G.174 | Transmission performance objectives for terrestrial digital wireless systems using portable terminals to access the PSTN
		 
 | 
| G.175 | Transmission planning for private/public network interconnection of voice traffic
		 
 | 
| G.176 | Planning guidelines for the integration of ATM technology into networks supporting voiceband services
		 
 | 
| G.177 | Transmission planning for voiceband services over hybrid Internet/PSTN connections
		 
 | 
| G.180 | Characteristics of N + M type direct transmission restoration systems for use on digital and analogue sections, links or equipment
		 
 | 
| G.181 | Characteristics of 1 + 1 type restoration systems for use on digital transmission links
		 
 | 
| G.191 | Software tools for speech and audio coding standardization
		 
 | 
| G.192 | A common digital parallel interface for speech standardization activities
		 
 | 
| G.211 | Make-up of a carrier link
		 
 | 
| G.212 | Hypothetical reference circuits for analogue systems
		 
 | 
| G.213 | Interconnection of systems in a main repeater station
		 
 | 
| G.214 | Line stability of cable systems
		 
 | 
| G.215 | Hypothetical reference circuit of 5000 km for analogue systems
		 
 | 
| G.221 | Overall recommendations relating to carrier-transmission systems
		 
 | 
| G.222 | Noise objectives for design of carrier-transmission systems of 2500 km
		 
 | 
| G.223 | Assumptions for the calculation of noise on hypothetical reference circuits for telephony
		 
 | 
| G.224 | Maximum permissible value for the absolute power level (power referred to one milliwatt) of a signalling pulse
		 This Recommendation was formerly also included in Q series under number Q.16
 | 
| G.225 | Recommendations relating to the accuracy of carrier frequencies
		 
 | 
| G.226 | Noise on a real link
		 
 | 
| G.227 | Conventional telephone signal
		 
 | 
| G.228 | Measurement of circuit noise in cable systems using a uniform-spectrum random noise loading
		 
 | 
| G.229 | Unwanted modulation and phase jitter
		 
 | 
| G.230 | Measuring methods for noise produced by modulating equipment and through-connection filters
		 
 | 
| G.231 | Arrangement of carrier equipment
		 
 | 
| G.232 | 12-channel terminal equipments
		 
 | 
| G.233 | Recommendations concerning translating equipments
		 
 | 
| G.234 | 
[Withdrawn] 8-channel terminal equipments
		 Deleted after its content became technically out of date
 | 
| G.235 | 
[Withdrawn] 16-channel terminal equipments
		 Deleted after its content became technically out of date
 | 
| G.241 | Pilots on groups, supergroups, etc.
		 
 | 
| G.242 | Through-connection of groups, supergroups, etc.
		 
 | 
| G.243 | Protection of pilots and additional measuring frequencies at points where there is a through-connection
		 
 | 
| G.311 | 
[Withdrawn] General characteristics of systems providing 12 carrier telephone circuits on an open-wire pair
		 Deleted after its content became technically out of date
 | 
| G.312 | 
[Withdrawn] Intermediate repeaters for open-wire carrier systems conforming to Recommendation G.311
		 Deleted after its content became technically out of date
 | 
| G.313 | 
[Withdrawn] Open-wire lines for use with 12-channel carrier systems
		 Deleted after its content became technically out of date
 | 
| G.314 | 
[Withdrawn] General characteristics of systems providing eight carrier telephone circuits on an open-wire pair
		 Deleted after its content became technically out of date
 | 
| G.322 | General characteristics recommended for systems on symmetric pair cables
		 
 | 
| G.323 | 
[Withdrawn] A typical transistorized system on symmetric cable pairs
		 Deleted after its content became technically out of date
 | 
| G.324 | 
[Withdrawn] General characteristics for valve-type systems on symmetric cable pairs
		 Deleted after its content became technically out of date
 | 
| G.325 | General characteristics recommended for systems providing 12 telephone carrier circuits on a symmetric cable pair [(12 + 12) systems]
		 
 | 
| G.326 | 
[Withdrawn] Typical systems on symmetric cable pairs [(12 + 12) systems]
		 Deleted after its content became technically out of date
 | 
| G.327 | 
[Withdrawn] Valve-type systems offering 12 carrier telephone circuits on a symmetric cable pair [(12 + 12) systems]
		 Deleted after its content became technically out of date
 | 
| G.332 | 12 MHz systems on standardized 2.6/9.5 mm coaxial cable pairs
		 
 | 
| G.333 | 60 MHz systems on standardized 2.6/9.5 mm coaxial cable pairs
		 
 | 
| G.334 | 18 MHz systems on standardized 2.6/9.5 mm coaxial cable pairs
		 
 | 
| G.337 | 
[Withdrawn] General characteristics of systems on 2.6/9.5 mm coaxial cable pairs
		 Deleted after its content became technically out of date
 | 
| G.338 | 
[Withdrawn] 4 MHz valve-type systems on standardized 2.6/9.5 mm coaxial cable pairs
		 Deleted after its content became technically out of date
 | 
| G.339 | 
[Withdrawn] 12 MHz valve-type systems on standardized 2.6/9.5 mm coaxial cable pairs
		 Deleted after its content became technically out of date
 | 
| G.341 | 1.3 MHz systems on standardized 1.2/4.4 mm coaxial cable pairs
		 
 | 
| G.343 | 4 MHz systems on standardized 1.2/4.4 mm coaxial cable pairs
		 
 | 
| G.344 | 6 MHz systems on standardized 1.2/4.4 mm coaxial cable pairs
		 
 | 
| G.345 | 12 MHz systems on standardized 1.2/4.4 mm coaxial cable pairs
		 
 | 
| G.346 | 18 MHz systems on standardized 1.2/4.4 mm coaxial cable pairs
		 
 | 
| G.352 | Interconnection of coaxial carrier systems of different designs
		 
 | 
| G.356 | 
[Withdrawn] (120 + 120) channel systems on a single coaxial pair
		 Deleted after its content became technically out of date
 | 
| G.361 | 
[Withdrawn] Systems providing three carrier telephone circuits on a pair of open-wire lines
		 Deleted after its content became technically out of date
 | 
| G.371 | 
[Withdrawn] FDM carrier systems for submarine cable
		 Deleted after its content became technically out of date
 | 
| G.411 | Use of radio-relay systems for international telephone circuits
		 
 | 
| G.412 | 
[Withdrawn] Terminal equipments of radio-relay systems forming part of a general telecommunication network
		 Deleted after its content became technically out of date
 | 
| G.421 | Methods of interconnection
		 
 | 
| G.422 | Interconnection at audio-frequencies
		 
 | 
| G.423 | Interconnection at the baseband frequencies of frequency-division multiplex radio-relay systems
		 
 | 
| G.431 | Hypothetical reference circuits for frequency-division multiplex radio-relay systems
		 
 | 
| G.433 | 
[Withdrawn] Hypothetical reference circuit for trans-horizon radio-relay systems for telephony using frequency-division multiplex
		 Deleted after its content became technically out of date
 | 
| G.434 | 
[Withdrawn] Hypothetical reference circuit for systems using analogue transmission in the fixed-satellite service
		 Deleted after its content became technically out of date
 | 
| G.441 | Permissible circuit noise on frequency-division multiplex radio-relay systems
		 
 | 
| G.442 | Radio-relay system design objectives for noise at the far end of a hypothetical reference circuit with reference to telegraphy transmission
		 
 | 
| G.444 | 
[Withdrawn] Allowable noise power in the hypothetical reference circuit of trans-horizon radio-relay systems for telephony using frequency-division multiplex
		 Deleted after its content became technically out of date
 | 
| G.445 | 
[Withdrawn] Allowable noise power in the hypothetical reference circuit for frequency-division multiplex telephony in the fixed-satellite service
		 Deleted after its content became technically out of date
 | 
| G.451 | Use of radio links in international telephone circuits
		 
 | 
| G.453 | 
[Withdrawn] Improved transmission system for HF radio-telephone circuits
		 Deleted after its content became technically out of date
 | 
| G.464 | 
[Withdrawn] Principles of the devices used to achieve privacy in radiotelephone conversations
		 Deleted after its content became technically out of date
 | 
| G.473 | 
[Withdrawn] Interconnection of a maritime mobile satellite system with the international automatic switched telephone service; transmission aspects
		 Withdrawn because it provided transmission planning information that was obsolete and no longer used
 | 
| G.511 | Test methodology for Group 3 facsimile processing equipment in the Public Switched Telephone Network
		 This Recommendation was renumbered as ITU-T Rec. T.5 on 2002-02-15 without further modification
 | 
| G.541 | 
[Withdrawn] Specification of factory lengths of loaded telecommunication cable
		 Deleted after its content became technically out of date
 | 
| G.542 | 
[Withdrawn] Specification of loading coils for loaded telecommunication cables
		 Deleted after its content became technically out of date
 | 
| G.543 | 
[Withdrawn] Specification for repeater sections of loaded telecommunication cable
		 Deleted after its content became technically out of date
 | 
| G.544 | 
[Withdrawn] Specifications for terminal equipment and intermediate repeater stations
		 Deleted after its content became technically out of date
 | 
| G.601 | Terminology for cables
		 
 | 
| G.602 | Reliability and availability of analogue cable transmission systems and associated equipments
		 
 | 
| G.611 | Characteristics of symmetric cable pairs for analogue transmission
		 
 | 
| G.612 | Characteristics of symmetric cable pairs designed for the transmission of systems with bit rates of the order of 6 to 34 Mbit/s
		 
 | 
| G.613 | Characteristics of symmetric cable pairs usable wholly for the transmission of digital systems with a bit rate of up to 2 Mbit/s
		 
 | 
| G.614 | Characteristics of symmetric pair star-quad cables designed earlier for analogue transmission systems and being used now for digital system transmission at bit rates of 6 to 34 Mbit/s
		 
 | 
| G.621 | Characteristics of 0.7/2.9 mm coaxial cable pairs
		 
 | 
| G.622 | Characteristics of 1.2/4.4 mm coaxial cable pairs
		 
 | 
| G.623 | Characteristics of 2.6/9.5 mm coaxial cable pairs
		 
 | 
| G.631 | Types of submarine cable to be used for systems with line frequencies of less than about 45 MHz
		 
 | 
| G.640 | Co-location longitudinally compatible interfaces for free space optical systems
		 
 | 
| G.641 | 
[Withdrawn] Waveguide diameters
		 Deleted after its content became technically out of date
 | 
| G.650 | Definition and test methods for the relevant parameters of single-mode fibres
		 
 | 
| G.650.1 | Definitions and test methods for linear, deterministic attributes of single-mode fibre and cable
		 
 | 
| G.650.2 | Definitions and test methods for statistical and non-linear related attributes of single-mode fibre and cable
		 
 | 
| G.650.3 | Test methods for installed single-mode optical fibre cable links
		 
 | 
| G.651 | Characteristics of a 50/125 µm multimode graded index optical fibre cable
		 ITU-T G.651 was withdrawn on 2008-08-16, its content having been obsoleted by the new ITU-T G.651.1 on multimode fibre applications in optical access networks
 | 
| G.651.1 | Characteristics of a 50/125 µm multimode graded index optical fibre cable for the optical access network
		 
 | 
| G.652 | Characteristics of a single-mode optical fibre and cable
		 
 | 
| G.653 | Characteristics of a dispersion-shifted, single-mode optical fibre and cable
		 
 | 
| G.654 | Characteristics of a cut-off shifted single-mode optical fibre and cable
		 
 | 
| G.655 | Characteristics of a non-zero dispersion-shifted single-mode optical fibre and cable
		 
 | 
| G.656 | Characteristics of a fibre and cable with non-zero dispersion for wideband optical transport
		 
 | 
| G.657 | Characteristics of a bending-loss insensitive single-mode optical fibre and cable
		 
 | 
| G.661 | Definitions and test methods for the relevant generic parameters of optical amplifier devices and subsystems
		 
 | 
| G.662 | Generic characteristics of optical amplifier devices and subsystems
		 
 | 
| G.663 | Application-related aspects of optical amplifier devices and subsystems
		 
 | 
| G.664 | Optical safety procedures and requirements for optical transmission systems
		 
 | 
| G.665 | Generic characteristics of Raman amplifiers and Raman amplified subsystems
		 
 | 
| G.666 | Characteristics of polarization mode dispersion compensators and of receivers that compensate for polarization mode dispersion
		 
 | 
| G.667 | Characteristics of adaptive chromatic dispersion compensators
		 
 | 
| G.671 | Transmission characteristics of optical components and subsystems
		 
 | 
| G.672 | Characteristics of multi-degree reconfigurable optical add/drop multiplexers
		 
 | 
| G.680 | Physical transfer functions of optical network elements
		 
 | 
| G.681 | 
[Withdrawn] Functional characteristics of interoffice and long-haul line systems using optical amplifiers, including optical multiplexing
		 
 | 
| G.691 | Optical interfaces for single channel STM-64 and other SDH systems with optical amplifiers
		 
 | 
| G.692 | Optical interfaces for multichannel systems with optical amplifiers
		 Covering note, 07.01.2000: Corrigendum 1
 | 
| G.693 | Optical interfaces for intra-office systems
		 
 | 
| G.694.1 | Spectral grids for WDM applications: DWDM frequency grid
		 
 | 
| G.694.2 | Spectral grids for WDM applications: CWDM wavelength grid
		 
 | 
| G.695 | Optical interfaces for coarse wavelength division multiplexing applications
		 
 | 
| G.696.1 | Longitudinally compatible intra-domain DWDM applications
		 
 | 
| G.697 | Optical monitoring for dense wavelength division multiplexing systems
		 
 | 
| G.698.1 | Multichannel DWDM applications with single-channel optical interfaces
		 
 | 
| G.698.2 | Amplified multichannel dense wavelength division multiplexing applications with single channel optical interfaces
		 
 | 
| G.698.3 | Multichannel seeded DWDM applications with single-channel optical interfaces
		 
 | 
| G.698.4 | Multichannel bi-directional DWDM applications with port agnostic single-channel optical interfaces
		 
 | 
| G.698.5 | Multichannel DWDM applications with single-channel optical interfaces in the O-band
		 
 | 
| G.698.6 | Multichannel WDM applications with single-channel optical interfaces in the O-band
		 
 | 
| G.700 | 
[Withdrawn] Framework of the series G.700, G.800 and G.900 Recommendations
		 Deleted after its content became technically out of date
 | 
| G.701 | Vocabulary of digital transmission and multiplexing, and pulse code modulation (PCM) terms
		 
 | 
| G.702 | Digital hierarchy bit rates
		 
 | 
| G.703 | Physical/electrical characteristics of hierarchical digital interfaces
		 
 | 
| G.704 | Synchronous frame structures used at 1544, 6312, 2048, 8448 and 44 736 kbit/s hierarchical levels
		 
 | 
| G.705 | Characteristics of plesiochronous digital hierarchy (PDH) equipment functional blocks
		 
 | 
| G.706 | Frame alignment and cyclic redundancy check (CRC) procedures relating to basic frame structures defined in Recommendation G.704
		 
 | 
| G.707 | Network node interface for the synchronous digital hierarchy (SDH)
		 Replaces 1993 versions of ITU-T G.707, G.708, G.709.
 | 
| G.Imp707 | Implementers' Guide for Recommendation ITU-T G.707/Y.1322 (07/2007) - Definitions and terms found in Recommendation ITU T G.707/Y.1322
		 
 | 
| G.708 | Sub STM-0 network node interface for the synchronous digital hierarchy (SDH)
		 
 | 
| G.709 | Interfaces for the optical transport network
		 
 | 
| G.709.1 | Flexible OTN common elements
		 
 | 
| G.709.2 | OTU4 long-reach interface
		 
 | 
| G.709.3 | Flexible OTN long-reach interfaces
		 
 | 
| G.709.4 | OTU25 and OTU50 short-reach interfaces
		 
 | 
| G.709.5 | Flexible OTN short-reach interfaces
		 
 | 
| G.709.6 | Flexible OTN B400G long-reach interfaces
		 
 | 
| G.709.20 | Overview of fine grain OTN
		 
 | 
| G.Imp709 | Implementers' Guide
		 
 | 
| G.711.0 | Lossless compression of G.711 pulse code modulation
		 
 | 
| G.711 | Pulse code modulation (PCM) of voice frequencies
		 Corresponding ANSI-C code is available in the G.711 module of the ITU-T G.191 Software Tools Library.
 | 
| G.711.1 | Wideband embedded extension for ITU-T G.711 pulse code modulation
		 
 | 
| G.Imp712 | Implementers' Guide for Recommendation ITU-T G.712
		 
 | 
| G.712 | Transmission performance characteristics of pulse code modulation channels
		 Replaces G.712, G.713, G.714, G.715
 | 
| G.713 | 
[Withdrawn] Performance characteristics of PCM channels between 2-wire interfaces at voice frequencies
		 The content of this Recommendation is now covered by ITU-T G.712
 | 
| G.714 | 
[Withdrawn] Separate performance characteristics for the encoding and decoding sides of PCM channels applicable to 4-wire voice-frequency interfaces
		 The content of this Recommendation is now covered by ITU-T G.712
 | 
| G.715 | 
[Withdrawn] Separate performance characteristics for the encoding and decoding side of PCM channels applicable to 2-wire interfaces
		 The content of this Recommendation is now covered by ITU-T G.712
 | 
| G.718 | Frame error robust narrow-band and wideband embedded variable bit-rate coding of speech and audio from 8-32 kbit/s
		 
 | 
| G.719 | Low-complexity, full-band audio coding for high-quality, conversational applications
		 
 | 
| G.720 | Characterization of low-rate digital voice coder performance with non-voice signals
		 
 | 
| G.720.1 | Generic sound activity detector
		 
 | 
| G.721 | 
[Withdrawn] 32 kbit/s adaptive differential pulse code modulation (ADPCM)
		 The content of this Recommendation is now covered by ITU-T G.726
 | 
| G.722 | 7 kHz audio-coding within 64 kbit/s
		 
 | 
| G.722.1 | Low-complexity coding at 24 and 32 kbit/s for hands-free operation in systems with low frame loss
		 
 | 
| G.722.2 | Wideband coding of speech at around 16 kbit/s using Adaptive Multi-Rate Wideband (AMR-WB)
		 
 | 
| G.Imp722.1 | Implementors' Guide for G.722.1 Main Body and Annex B: (Coding at 24 and 32 kbit/s for hands-free operation in systems with low frame loss)
		 
 | 
| G.Imp722.2 | Implementors' Guide for G.722.2: (Wideband coding of speech at around 16 kbit/s using Adaptive Multi-rate Wideband, AMR-WB)
		 
 | 
| G.723 | 
[Withdrawn] Extensions of Recommendation G.721 adaptive differential pulse code modulation to 24 and 40 kbit/s for digital circuit multiplication equipment application
		 The content of 1988 edition of ITU-T G.723 is now covered by ITU-T G.726
 | 
| G.723.1 | Dual rate speech coder for multimedia communications transmitting at 5.3 and 6.3 kbit/s
		 
 | 
| G.Imp723.1 | Implementors' Guide for G.723.1: (Dual rate speech coder for multimedia communications transmitting at 5.3 & 6.3 kbit/s)
		 
 | 
| G.724 | Characteristics of a 48-channel low bit rate encoding primary multiplex operating at 1544 kbit/s
		 
 | 
| G.725 | System aspects for the use of the 7 kHz audio codec within 64 kbit/s
		 
 | 
| G.726 | 40, 32, 24, 16 kbit/s Adaptive Differential Pulse Code Modulation (ADPCM)
		 Corresponding ANSI-C code is available in the G.726 module of the ITU-T G.191 Software Tools Library
 | 
| G.727 | 5-, 4-, 3- and 2-bit/sample embedded adaptive differential pulse code modulation (ADPCM)
		 The corresponding ANSI-C code is available in the G.727 module of the ITU-T G.191 Software Tools Library
 | 
| G.728 | Coding of speech at 16 kbit/s using low-delay code excited linear prediction
		 The corresponding ANSI-C code is available in the G.728 module of the ITU-T G.191 Software Tools Library
 | 
| G.Imp728 | Implementors' Guide for ITU-T Recommendation G.728 ("Coding of speech at 16 kbit/s using low-delay code excited linear prediction")
		 
 | 
| G.Imp729 | Implementers' Guide for Recommendation ITU-T G.729 (2012) "Coding of speech at 8 kbit/s using CS-ACELP"
		 
 | 
| G.729 | Coding of speech at 8 kbit/s using conjugate-structure algebraic-code-excited linear prediction (CS-ACELP)
		 
 | 
| G.729.1 | G.729-based embedded variable bit-rate coder: An 8-32 kbit/s scalable wideband coder bitstream interoperable with G.729
		 
 | 
| G.731 | Primary PCM multiplex equipment for voice frequencies
		 
 | 
| G.732 | Characteristics of primary PCM multiplex equipment operating at 2048 kbit/s
		 
 | 
| G.733 | Characteristics of primary PCM multiplex equipment operating at 1544 kbit/s
		 
 | 
| G.734 | Characteristics of synchronous digital multiplex equipment operating at 1544 kbit/s
		 
 | 
| G.735 | Characteristics of primary PCM multiplex equipment operating at 2048 kbit/s and offering synchronous digital access at 384 kbit/s and/or 64 kbit/s
		 
 | 
| G.736 | Characteristics of a synchronous digital multiplex equipment operating at 2048 kbit/s
		 
 | 
| G.737 | Characteristics of an external access equipment operating at 2048 kbit/s offering synchronous digital access at 384 kbit/s and/or 64 kbit/s
		 
 | 
| G.738 | Characteristics of primary PCM multiplex equipment operating at 2048 kbit/s and offering synchronous digital access at 320 kbit/s and/or 64 kbit/s
		 
 | 
| G.739 | Characteristics of an external access equipment operating at 2048 kbit/s offering synchronous digital access at 320 kbit/s and/or 64 kbit/s
		 
 | 
| G.741 | General considerations on second order multiplex equipments
		 
 | 
| G.742 | Second order digital multiplex equipment operating at 8448 kbit/s and using positive justification
		 
 | 
| G.743 | Second order digital multiplex equipment operating at 6312 kbit/s and using positive justification
		 
 | 
| G.744 | Second order PCM multiplex equipment operating at 8448 kbit/s
		 
 | 
| G.745 | Second order digital multiplex equipment operating at 8448 kbit/s and using positive/zero/negative justification
		 
 | 
| G.746 | Characteristics of second order PCM multiplex equipment operating at 6312 kbit/s
		 
 | 
| G.747 | Second order digital multiplex equipment operating at 6312 kbit/s and multiplexing three tributaries at 2048 kbit/s
		 
 | 
| G.751 | Digital multiplex equipments operating at the third order bit rate of 34 368 kbit/s and the fourth order bit rate of 139 264 kbit/s and using positive justification
		 
 | 
| G.752 | Characteristics of digital multiplex equipments based on a second order bit rate of 6312 kbit/s and using positive justification
		 
 | 
| G.753 | Third order digital multiplex equipment operating at 34 368 kbit/s and using positive/zero/negative justification
		 
 | 
| G.754 | Fourth order digital multiplex equipment operating at 139 264 kbit/s and using positive/zero/negative justification
		 
 | 
| G.755 | Digital multiplex equipment operating at 139 264 kbit/s and multiplexing three tributaries at 44 736 kbit/s
		 
 | 
| G.761 | General characteristics of a 60-channel transcoder equipment
		 
 | 
| G.762 | General characteristics of a 48-channel transcoder equipment
		 
 | 
| G.763 | Digital circuit multiplication equipment using G.726 ADPCM and digital speech interpolation
		 This Recommendation includes 2 diskettes. The first one contains A-Law and m-Law test vectors for DCME verification. The second one contains example transmit/receive SDLs.
Covering note, May 2000: Erratum
 | 
| G.Imp763 | Implementor's Guide for Recommendation G.763
		 
 | 
| G.764 | Voice packetization - Packetized voice protocols
		 
 | 
| G.765 | Packet circuit multiplication equipment
		 
 | 
| G.766 | Facsimile demodulation/remodulation for digital circuit multiplication equipment
		 
 | 
| G.767 | Digital circuit multiplication equipment using 16 kbit/s LD-CELP, digital speech interpolation and facsimile demodulation/remodulation
		 
 | 
| G.Imp767 | Implementor's Guide for Recommendation G.767
		 
 | 
| G.768 | Digital circuit multiplication equipment using 8 kbit/s CS-ACELP
		 
 | 
| G.769 | Circuit multiplication equipment optimized for IP-based networks
		 
 | 
| G.771 | 
[Withdrawn] Q-interfaces and associated protocols for transmission equipment in the TMN
		 Deleted after its content became technically out of date
 | 
| G.772 | Protected monitoring points provided on digital transmission systems
		 
 | 
| G.773 | Protocol suites for Q-interfaces for management of transmission systems
		 
 | 
| G.Imp773 | Implementers' Guide for Recommendation ITU-T G.773
		 
 | 
| G.774 | Synchronous digital hierarchy (SDH) - Management information model for the network element view
		 
 | 
| G.774.1 | Synchronous digital hierarchy (SDH) - Bidirectional performance monitoring for the network element view
		 
 | 
| G.774.2 | Synchronous digital hierarchy (SDH) - Configuration of the payload structure for the network element view
		 
 | 
| G.774.02 | Synchronous digital hierarchy (SDH) configuration of the payload structure for the network element view
		 
 | 
| G.774.03 | Synchronous digital hierarchy (SDH) management of multiplex-section protection for the network element view
		 
 | 
| G.774.3 | Synchronous digital hierarchy (SDH) - Management of multiplex-section protection for the network element view
		 
 | 
| G.774.4 | Synchronous digital hierarchy (SDH) - Management of the subnetwork connection protection for the network element view
		 
 | 
| G.774.04 | Synchronous digital hierarchy (SDH) management of the subnetwork connection protection for the network element view
		 
 | 
| G.774.05 | Synchronous Digital Hierarchy (SDH) management of connection supervision functionality (HCS/LCS) for the network element view
		 
 | 
| G.774.5 | Synchronous digital hierarchy (SDH) - Management of connection supervision functionality (HCS/LCS) for the network element view
		 
 | 
| G.774.6 | Synchronous digital hierarchy (SDH) - Unidirectional performance monitoring for the network element view
		 
 | 
| G.774.7 | Synchronous digital hierarchy (SDH) - Management of lower order path trace and interface labelling for the network element view
		 
 | 
| G.774.8 | Synchronous digital hierarchy (SDH) - Management of radio-relay systems for the network element view
		 
 | 
| G.774.9 | Synchronous digital hierarchy (SDH) - Configuration of linear multiplex-section protection for the network element view
		 
 | 
| G.774.10 | Synchronous digital hierarchy (SDH) - Multiplex Section (MS) shared protection ring management for the network element view
		 
 | 
| G.775 | Loss of Signal (LOS), Alarm Indication Signal (AIS) and Remote Defect Indication (RDI) defect detection and clearance criteria for PDH signals
		 
 | 
| G.776.1 | Managed objects for signal processing network elements
		 This Recommendation includes one diskette containing the information model of Signal Processing Network Elements (SPNE).
 | 
| G.776.2 | SPNE mechanisms/auxiliary functions
		 
 | 
| G.776.3 | ADPCM DCME configuration map report
		 
 | 
| G.776.4 | Signal processing network equipment
		 
 | 
| G.Imp776.1 | Implementor's Guide for Recommendation G.776.1
		 
 | 
| G.780 | Terms and definitions for synchronous digital hierarchy (SDH) networks
		 
 | 
| G.781 | Synchronization layer functions for frequency synchronization based on the physical layer
		 
 | 
| G.781W | 
[Withdrawn] Structure of Recommendations on equipment for the synchronous digital hierarchy (SDH)
		 Merged with ITU-T Rec. G.783 in 1997
 | 
| G.781.1 | Synchronization layer functions for packet-based synchronization
		 
 | 
| G.782 | 
[Withdrawn] Types and general characteristics of synchronous digital hierarchy (SDH) equipment
		 Merged with ITU-T G.783 in 1997
 | 
| G.783 | Characteristics of synchronous digital hierarchy (SDH) equipment functional blocks
		 
 | 
| G.784 | Management aspects of synchronous digital hierarchy (SDH) transport network elements
		 
 | 
| G.785 | Characteristics of a flexible multiplexer in a synchronous digital hierarchy environment
		 
 | 
| G.791 | General considerations on transmultiplexing equipments
		 
 | 
| G.792 | Characteristics common to all transmultiplexing equipments
		 
 | 
| G.793 | Characteristics of 60-channel transmultiplexing equipments
		 
 | 
| G.794 | Characteristics of 24-channel transmultiplexing equipments
		 
 | 
| G.795 | Characteristics of codecs for FDM assemblies
		 
 | 
| G.796 | Characteristics of a 64 kbit/s cross-connect equipment with 2048 kbit/s access ports
		 
 | 
| G.797 | Characteristics of a flexible multiplexer in a plesiochronous digital hierarchy environment
		 
 | 
| G.798 | Characteristics of optical transport network hierarchy equipment functional blocks
		 
 | 
| G.798.1 | Types and characteristics of optical transport network equipment
		 
 | 
| G.Imp798 | Implementers' Guide
		 
 | 
| G.799.1 | Functionality and interface specifications for GSTN transport network equipment for interconnecting GSTN and IP networks
		 
 | 
| G.799.2 | Mechanism for dynamic coordination of signal processing functions
		 
 | 
| G.799.3 | Signal processing functionality and performance of an IP-to-IP voice gateway optimised for the transport of voice and voiceband data
		 
 | 
| G.799.4 | Procedures for the control of de-jitter buffers used in PSTN-IP gateways carrying voiceband data
		 
 | 
| G.800 | Unified functional architecture of transport networks
		 
 | 
| G.801 | Digital transmission models
		 
 | 
| G.802 | Interworking between networks based on different digital hierarchies and speech encoding laws
		 
 | 
| G.803 | Architecture of transport networks based on the synchronous digital hierarchy (SDH)
		 
 | 
| G.804 | ATM cell mapping into plesiochronous digital hierarchy (PDH)
		 
 | 
| G.805 | Generic functional architecture of transport networks
		 
 | 
| G.806 | Characteristics of transport equipment - Description methodology and generic functionality - Amendment 1
		 
 | 
| G.807 | Generic functional architecture of the optical media layer
		 
 | 
| G.Imp807 | Implementers' Guide
		 
 | 
| G.808 | Terms and definitions for network protection and restoration
		 
 | 
| G.Imp808.1 | Implementers' Guide for Recommendation ITU-T G.808.1 (05/2014)
		 
 | 
| G.808.1 | Generic protection switching - Linear trail and subnetwork protection
		 
 | 
| G.808.2 | Generic protection switching - Ring protection
		 
 | 
| G.808.3 | Generic protection switching - Shared mesh protection
		 
 | 
| G.808.4 | Linear protection for fine grain metro transport network (fgMTN) and fine grain optical transport network (fgOTN)
		 
 | 
| G.809 | Functional architecture of connectionless layer networks
		 
 | 
| G.810 | Definitions and terminology for synchronization networks
		 
 | 
| G.811 | Timing characteristics of primary reference clocks
		 
 | 
| G.811.1 | Timing characteristics of enhanced primary reference clocks
		 
 | 
| G.812 | Timing requirements of slave clocks suitable for use as node clocks in synchronization networks
		 
 | 
| G.813 | Timing characteristics of SDH equipment slave clocks (SEC)
		 
 | 
| G.820 | Relationships among ISDN, IP-based network and physical layer performance Recommendations
		 Formerly ITU-T Rec. I.351/Y.801/Y.1501
 | 
| G.821 | Error performance of an international digital connection operating at a bit rate below the primary rate and forming part of an Integrated Services Digital Network
		 
 | 
| G.822 | Controlled slip rate objectives on an international digital connection
		 
 | 
| G.823 | The control of jitter and wander within digital networks which are based on the 2048 kbit/s hierarchy
		 
 | 
| G.824 | The control of jitter and wander within digital networks which are based on the 1544 kbit/s hierarchy
		 
 | 
| G.825 | The control of jitter and wander within digital networks which are based on the synchronous digital hierarchy (SDH)
		 
 | 
| G.826 | End-to-end error performance parameters and objectives for international, constant bit-rate digital paths and connections
		 
 | 
| G.827 | Availability performance parameters and objectives for end-to-end international constant bit-rate digital paths
		 
 | 
| G.827.1 | 
[Withdrawn] Availability performance objectives for end-to-end international constant bit-rate digital paths at or above the primary rate
		 
 | 
| G.828 | Error performance parameters and objectives for international, constant bit-rate synchronous digital paths
		 
 | 
| G.829 | Error performance events for SDH multiplex and regenerator sections
		 
 | 
| G.831 | Management capabilities of transport networks based on the synchronous digital hierarchy (SDH)
		 
 | 
| G.832 | Transport of SDH elements on PDH networks - Frame and multiplexing structures
		 
 | 
| G.841 | Types and characteristics of SDH network protection architectures
		 
 | 
| G.842 | Interworking of SDH network protection architectures
		 
 | 
| G.Imp850 | G.850-Series TMN Implementors' Guide - Defects and Resolutions
		 
 | 
| G.851.1 | Management of the transport network - Application of the RM-ODP framework
		 
 | 
| G.852.1 | Enterprise viewpoint for simple subnetwork connection management
		 
 | 
| G.852.2 | Enterprise viewpoint description of transport network resource model
		 
 | 
| G.852.3 | Enterprise viewpoint for topology management
		 
 | 
| G.852.6 | Enterprise viewpoint for trail management
		 
 | 
| G.852.8 | Enterprise viewpoint for pre-provisioned adaptation management
		 
 | 
| G.852.10 | Enterprise viewpoint for pre-provisioned link connection management
		 
 | 
| G.852.12 | Enterprise viewpoint for pre-provisioned link management
		 
 | 
| G.852.16 | Enterprise viewpoint for pre-provisioned route discovery
		 
 | 
| G.853.1 | Common elements of the information viewpoint for the management of a transport network
		 
 | 
| G.853.2 | Subnetwork connection management information viewpoint
		 
 | 
| G.853.3 | Information viewpoint for topology management
		 
 | 
| G.853.6 | Information viewpoint for trail management
		 
 | 
| G.853.8 | Information viewpoint for pre-provisioned adaptation management
		 
 | 
| G.853.10 | Information viewpoint for pre-provisioned link connection management
		 
 | 
| G.853.12 | Information viewpoint for pre-provisioned link management
		 
 | 
| G.853.16 | Information viewpoint for pre-provisioned route discovery
		 
 | 
| G.854.1 | Computational interfaces for basic transport network model
		 
 | 
| G.854.3 | Computational viewpoint for topology management
		 
 | 
| G.854.6 | Computational viewpoint for trail management
		 
 | 
| G.854.8 | Computational viewpoint for pre-provisioned adaptation management
		 
 | 
| G.854.10 | Computational viewpoint for pre-provisioned link connection management
		 
 | 
| G.854.12 | Computational viewpoint for pre-provisioned link management
		 
 | 
| G.854.16 | Computational viewpoint for pre-provisioned route discovery
		 
 | 
| G.855.1 | GDMO engineering viewpoint for the generic network level model
		 
 | 
| G.861 | Principles and guidelines for the integration of satellite and radio systems in SDH transport networks
		 
 | 
| G.870 | Terms and definitions for optical transport networks
		 
 | 
| G.871 | Framework of Optical Transport Network Recommendations
		 
 | 
| G.Imp871 | Implementers' Guide for Recommendation ITU-T G.871/Y.1301 (10/2000)
		 
 | 
| G.872 | Architecture of the optical transport network
		 
 | 
| G.Imp872 | Implementers' Guide
		 
 | 
| G.873.1 | Optical transport network: Linear protection
		 
 | 
| G.873.2 | ODUk shared ring protection
		 
 | 
| G.873.3 | Optical transport network - Shared mesh protection
		 
 | 
| G.Imp873.1 | Implementers' Guide
		 
 | 
| G.874 | Management aspects of optical transport network elements
		 
 | 
| G.874.1 | Optical transport network: Protocol-neutral management information model for the network element view
		 
 | 
| G.Imp874 | Implementers' Guide
		 
 | 
| G.Imp874.1 | Implementers' Guide for Recommendation ITU-T G.874.1 (01/2002)
		 
 | 
| G.875 | Optical transport network: Protocol-neutral management information model for the network element view
		 
 | 
| G.876 | Management requirements and information model for the optical media network
		 
 | 
| G.901 | General considerations on digital sections and digital line systems
		 
 | 
| G.902 | Framework Recommendation on functional access networks (AN) - Architecture and functions, access types, management and service node aspects
		 
 | 
| G.911 | Parameters and calculation methodologies for reliability and availability of fibre optic systems
		 
 | 
| G.921 | Digital sections based on the 2048 kbit/s hierarchy
		 
 | 
| G.931 | 
[Withdrawn] Digital line sections at 3152 kbit/s
		 
 | 
| G.941 | Digital line systems provided by FDM transmission bearers
		 
 | 
| G.950 | General considerations on digital line systems
		 
 | 
| G.951 | Digital line systems based on the 1544 kbit/s hierarchy on symmetric pair cables
		 
 | 
| G.952 | Digital line systems based on the 2048 kbit/s hierarchy on symmetric pair cables
		 
 | 
| G.953 | Digital line systems based on the 1544 kbit/s hierarchy on coaxial pair cables
		 
 | 
| G.954 | Digital line systems based on the 2048 kbit/s hierarchy on coaxial pair cables
		 
 | 
| G.955 | Digital line systems based on the 1544 kbit/s and the 2048 kbit/s hierarchy on optical fibre cables
		 
 | 
| G.956 | 
[Withdrawn] Digital line systems based on the 2048 kbit/s hierarchy on optical fibre cables
		 The content of this Recommendation is now covered by ITU-T G.955
 | 
| G.957 | Optical interfaces for equipments and systems relating to the synchronous digital hierarchy
		 
 | 
| G.958 | 
[Withdrawn] Digital line systems based on the synchronous digital hierarchy for use on optical fibre cables
		 
 | 
| G.959.1 | Optical transport network physical layer interfaces
		 
 | 
| G.960 | Access digital section for ISDN basic rate access
		 
 | 
| G.961 | Digital transmission system on metallic local lines for ISDN basic rate access
		 Covering note, 1st August 2000: Corrigendum 1
 | 
| G.962 | Access digital section for ISDN primary rate at 2048 kbit/s
		 
 | 
| G.963 | Access digital section for ISDN primary rate at 1544 kbit/s
		 
 | 
| G.964 | V-Interfaces at the digital local exchange (LE) - V5.1 interface (based on 2048 kbit/s) for the support of access network (AN)
		 
 | 
| G.965 | V-interfaces at the digital local exchange (LE) - V5.2 interface (based on 2048 kbit/s) for the support of access network (AN)
		 
 | 
| G.966 | Access digital section for B-ISDN
		 
 | 
| G.967.1 | V-interfaces at the service node (SN) : VB5.1 reference point specification
		 This Recommendation includes one diskette containing the SDL process diagrams corresponding to the VB5.1 reference point.
 | 
| G.967.2 | V-interfaces at the service node (SN) : VB5.2 reference point specification
		 This Recommendation includes one diskette containing the SDL process diagrams corresponding to the VB5.2 reference point.
 | 
| G.967.3 | V-interfaces at the service node (SN) : Protocol implementation conformance statements for interfaces at VB5 reference points
		 
 | 
| G.971 | General features of optical fibre submarine cable systems
		 
 | 
| G.972 | Definition of terms relevant to optical fibre submarine cable systems
		 
 | 
| G.973 | Characteristics of repeaterless optical fibre submarine cable systems
		 
 | 
| G.973.1 | Longitudinally compatible DWDM applications for repeaterless optical fibre submarine cable systems
		 
 | 
| G.973.2 | Multichannel DWDM applications with single channel optical interfaces for repeaterless optical fibre submarine cable systems
		 
 | 
| G.974 | Characteristics of regenerative optical fibre submarine cable systems
		 
 | 
| G.975 | Forward error correction for submarine systems
		 
 | 
| G.975.1 | Forward error correction for high bit-rate DWDM submarine systems
		 
 | 
| G.976 | Test methods applicable to optical fibre submarine cable systems
		 
 | 
| G.977 | Characteristics of optically amplified optical fibre submarine cable systems
		 
 | 
| G.977.1 | Transverse compatible dense wavelength division multiplexing applications for repeatered optical fibre submarine cable systems
		 
 | 
| G.978 | Characteristics of optical fibre submarine cables
		 
 | 
| G.979 | Characteristics of monitoring systems for optical submarine cable systems
		 
 | 
| G.981 | PDH optical line systems for the local network
		 
 | 
| G.982 | Optical access networks to support services up to the ISDN primary rate or equivalent bit rates
		 
 | 
| G.983.1 | Broadband optical access systems based on Passive Optical Networks (PON)
		 
 | 
| G.983.2 | ONT management and control interface specification for B-PON
		 
 | 
| G.Imp983.2 | Implementers' Guide for Recommendation ITU-T G.983.2 (07/2005)
		 
 | 
| G.983.3 | A broadband optical access system with increased service capability by wavelength allocation
		 
 | 
| G.983.4 | A broadband optical access system with increased service capability using dynamic bandwidth assignment
		 
 | 
| G.983.5 | A broadband optical access system with enhanced survivability
		 
 | 
| G.983.6 | 
[Withdrawn] ONT management and control interface specifications for B-PON system with protection features
		 Deleted on 2006-05-22, the material of ITU-T Recs G.983.6, G.983.7, G.983.8, G.983.9 and G.983.10 having been incorporated in ITU-T Rec. G.983.2 (2005)
 | 
| G.983.7 | 
[Withdrawn] ONT management and control interface specification for Dynamic Bandwidth Assignment (DBA) B-PON system
		 Deleted on 2006-05-22, the material of ITU-T Recs G.983.6, G.983.7, G.983.8, G.983.9 and G.983.10 having been incorporated in ITU-T Rec. G.983.2 (2005)
 | 
| G.983.8 | 
[Withdrawn] B-PON OMCI support for IP, ISDN, video, VLAN tagging, VC cross-connections and other select functions
		 Deleted on 2006-05-22, the material of ITU-T Recs G.983.6, G.983.7, G.983.8, G.983.9 and G.983.10 having been incorporated in ITU-T Rec. G.983.2 (2005)
 | 
| G.983.9 | 
[Withdrawn] B-PON ONT management and control interface (OMCI) support for wireless Local Area Network interfaces
		 Deleted on 2006-05-22, the material of ITU-T Recs G.983.6, G.983.7, G.983.8, G.983.9 and G.983.10 having been incorporated in ITU-T Rec. G.983.2 (2005)
 | 
| G.983.10 | 
[Withdrawn] B-PON ONT management and control interface (OMCI) support for Digital Subscriber Line interfaces
		 Deleted on 2006-05-22, the material of ITU-T Recs G.983.6, G.983.7, G.983.8, G.983.9 and G.983.10 having been incorporated in ITU-T Rec. G.983.2 (2005)
 | 
| G.984.1 | Gigabit-capable passive optical networks (GPON): General characteristics
		 
 | 
| G.984.2 | Gigabit-capable Passive Optical Networks (G-PON): Physical Media Dependent (PMD) layer specification
		 
 | 
| G.984.3 | Gigabit-capable passive optical networks (G-PON): Transmission convergence layer specification
		 
 | 
| G.984.4 | Gigabit-capable passive optical networks (G-PON): ONT management and control interface specification
		 
 | 
| G.Imp.984.4 | Implementers' Guide for Recommendation ITU-T G.984.4
		 
 | 
| G.984.5 | Gigabit-capable passive optical networks (G-PON): Enhancement band
		 
 | 
| G.984.6 | Gigabit-capable passive optical networks (GPON): Reach extension
		 
 | 
| G.984.7 | Gigabit-capable passive optical networks (GPON): Long reach
		 
 | 
| G.Imp984.3 | Implementers' Guide for ITU-T Rec. G.984.3 (02/2004)
		 
 | 
| G.985 | 100 Mbit/s point-to-point Ethernet based optical access system
		 
 | 
| G.986 | 1 Gbit/s point-to-point Ethernet-based optical access system
		 
 | 
| G.987 | 10-Gigabit-capable passive optical network (XG-PON) systems: Definitions, abbreviations and acronyms
		 
 | 
| G.987.1 | 10-Gigabit-capable passive optical networks (XG-PON): General requirements
		 
 | 
| G.987.2 | 10-Gigabit-capable passive optical networks (XG-PON): Physical media dependent (PMD) layer specification
		 
 | 
| G.987.3 | 10-Gigabit-capable passive optical networks (XG-PON): Transmission convergence (TC) layer specification
		 
 | 
| G.987.4 | 10-Gigabit-capable passive optical networks (XG-PON): Reach extension
		 
 | 
| G.988 | ONU management and control interface (OMCI) specification
		 
 | 
| G.989 | 40-Gigabit-capable passive optical networks (NG-PON2): Definitions, abbreviations and acronyms
		 
 | 
| G.989.1 | 40-Gigabit-capable passive optical networks (NG-PON2): General requirements
		 
 | 
| G.989.2 | 40-Gigabit-capable passive optical networks 2 (NG-PON2): Physical media dependent (PMD) layer specification
		 
 | 
| G.989.3 | 40-Gigabit-capable passive optical networks (NG-PON2): Transmission convergence layer specification
		 
 | 
| G.991.1 | High bit rate digital subscriber line (HDSL) transceivers
		 
 | 
| G.991.2 | Single-pair high-speed digital subscriber line (SHDSL) transceivers
		 
 | 
| G.992.1 | Asymmetric digital subscriber line (ADSL) transceivers
		 
 | 
| G.992.2 | Splitterless asymmetric digital subscriber line (ADSL) transceivers
		 
 | 
| G.992.3 | Asymmetric digital subscriber line transceivers 2 (ADSL2)
		 
 | 
| G.992.4 | Splitterless asymmetric digital subscriber line transceivers 2 (splitterless ADSL2)
		 
 | 
| G.992.5 | Asymmetric digital subscriber line 2 transceivers (ADSL2)- Extended bandwidth ADSL2 (ADSL2plus)
		 
 | 
| G.993.1 | Very high speed digital subscriber line transceivers (VDSL)
		 
 | 
| G.993.2 | Very high speed digital subscriber line transceivers 2 (VDSL2)
		 
 | 
| G.993.5 | Self-FEXT cancellation (vectoring) for use with VDSL2 transceivers
		 
 | 
| G.994.1 | Handshake procedures for digital subscriber line transceivers
		 
 | 
| G.995.1 | Overview of digital subscriber line (DSL) Recommendations
		 This Recommendation was deleted on 2011-12-16. The material contained in Recommendation ITU-T G.995.1 (2001) is now considered obsolete and this material needs to be updated. Due to the non-normative nature of the revised text, the updated material was agreed as a new Supplement 50 to ITU-T G-series Recommendations.
 | 
| G.995.2 | Enhanced common mode limits and measurement methods for customer premises equipment operating on copper pairs
		 
 | 
| G.996.1 | Test procedures for digital subscriber line (DSL) transceivers
		 
 | 
| G.996.2 | Single-ended line testing for digital subscriber lines
		 
 | 
| G.997.1 | Physical layer management for digital subscriber line transceivers
		 
 | 
| G.997.2 | Physical layer management for G.fast transceivers
		 
 | 
| G.997.3 | Physical layer management for MGfast transceivers
		 
 | 
| G.998.1 | ATM-based multi-pair bonding
		 
 | 
| G.998.2 | Ethernet-based multi-pair bonding
		 
 | 
| G.998.3 | Multi-pair bonding using time-division inverse multiplexing
		 
 | 
| G.998.4 | Improved impulse noise protection for digital subscriber line (DSL) transceivers
		 
 | 
| G.999.1 | Interface between the link layer and the physical layer for digital subscriber line (DSL) transceivers
		 
 | 
| G.1000 | Communications Quality of Service: A framework and definitions
		 
 | 
| G.1010 | End-user multimedia QoS categories
		 
 | 
| G.1011 | Reference guide to quality of experience assessment methodologies
		 
 | 
| G.1020 | Performance parameter definitions for quality of speech and other voiceband applications utilizing IP networks
		 
 | 
| G.1021 | Buffer models for development of client performance metrics
		 
 | 
| G.1022 | Buffer models for media streams on TCP transport
		 
 | 
| G.1023 | Framework for capacity assessment of packet data services in mobile networks
		 
 | 
| G.1027 | Quality of service metrics for the assessment of the impact of fixed geographic structures on telephony quality and call stability
		 
 | 
| G.1028 | End-to-end quality of service for voice over 4G mobile networks
		 
 | 
| G.1028.1 | End-to-end quality of service for video telephony over 4G mobile networks
		 
 | 
| G.1028.2 | Assessment of the LTE circuit switched fall back - Impact on voice quality of service
		 
 | 
| G.Imp1028 | Implementers' Guide for ITU-T Rec. G.1028 (06/2016)
		 
 | 
| G.1029 | Voice service diagnosis framework
		 
 | 
| G.1030 | Estimating end-to-end performance in IP networks for data applications
		 
 | 
| G.1031 | QoE factors in web-browsing
		 
 | 
| G.1032 | Influence factors on gaming quality of experience
		 
 | 
| G.1033 | Quality of service and quality of experience aspects of digital financial services
		 
 | 
| G.1034 | Quality of experience metrics for mobile telephony communication during rail travel
		 
 | 
| G.1035 | Influencing factors on quality of experience for virtual reality services
		 
 | 
| G.1036 | Quality of experience influencing factors for augmented reality services
		 
 | 
| G.1040 | Network contribution to transaction time
		 
 | 
| G.1050 | Network model for evaluating multimedia transmission performance over Internet Protocol
		 
 | 
| G.1051 | Latency measurement and interactivity scoring under real application data traffic patterns
		 
 | 
| G.1052 | Testbed framework for mobile application quality of service and quality of experience evaluation
		 
 | 
| G.1070 | Opinion model for video-telephony applications
		 
 | 
| G.1071 | Opinion model for network planning of video and audio streaming applications
		 
 | 
| G.1072 | Opinion model predicting gaming quality of experience for cloud gaming services
		 
 | 
| G.1080 | Quality of experience requirements for IPTV services
		 
 | 
| G.1081 | Performance monitoring points for IPTV
		 
 | 
| G.1082 | Measurement-based methods for improving the robustness of IPTV performance
		 
 | 
| G.1091 | Quality of Experience requirements for telepresence services
		 
 | 
| G.1092 | Taxonomy of telemeetings from a quality of experience perspective
		 
 | 
| G.7041 | Generic framing procedure
		 
 | 
| G.Imp7041 | Implementer's Guide  for ITU-T Rec. G.7041
		 
 | 
| G.7042 | Link capacity adjustment scheme (LCAS) for virtual concatenated signals
		 
 | 
| G.7043 | Virtual concatenation of plesiochronous digital hierarchy (PDH) signals
		 
 | 
| G.7044 | Hitless adjustment of ODUflex(GFP)
		 
 | 
| G.7701 | Common control aspects
		 
 | 
| G.7702 | Architecture for SDN control of transport networks
		 
 | 
| G.7703 | Architecture for the automatically switched optical network
		 ITU-T G.8080/Y.1304 was renumbered as ITU-T G.7703 (consented in April 2021 and approved in May 2021) to group it with the other architecture Recommendations that share common control aspects described in G.7701.
 | 
| G.7710 | Common equipment management function requirements
		 
 | 
| G.7711 | Generic protocol-neutral information model for transport resources
		 
 | 
| G.7712 | Architecture and specification of data communication network
		 
 | 
| G.7713 | Distributed call and connection management (DCM)
		 
 | 
| G.7713.1 | Distributed Call and Connection Management (DCM) based on PNNI
		 
 | 
| G.Imp7713.1 | Implementers' Guide for Recommendation ITU-T G.7713.1/Y.1704.1 (03/2003)
		 
 | 
| G.Imp7713.2 | Implementers' Guide for Recommendation ITU-T G.7713.2/Y.1704.2 (03/2003)
		 
 | 
| G.7713.2 | Distributed Call and Connection Management: Signalling mechanism using GMPLS RSVP-TE
		 
 | 
| G.7713.3 | Distributed Call and Connection Management: Signalling mechanism using GMPLS CR-LDP
		 
 | 
| G.Imp7713.3 | Implementers' Guide for Recommendation ITU-T G.7713.3/Y.1704.3 (03/2003)
		 
 | 
| G.Imp7713 | Implementers' Guide
		 
 | 
| G.7714 | Generalized automatic discovery for transport entities
		 
 | 
| G.7714.1 | Protocol for automatic discovery in transport networks
		 
 | 
| G.Imp7714.1 | Implementers' Guide
		 
 | 
| G.Imp7715 | Implementers' Guide for Recommendation ITU-T G.7715/Y.1706 (06/2002)
		 
 | 
| G.7715 | Architecture and requirements for routing in the automatically switched optical networks
		 
 | 
| G.Imp7715.1 | Implementers' Guide for Recommendation ITU-T G.7715.1/Y.1706.1 (02/2004)
		 
 | 
| G.7715.1 | ASON routing architecture and requirements for link state protocols
		 
 | 
| G.Imp7715.2 | Implementers' Guide for Recommendation ITU-T G.7715.2/Y.1706.2 (02/2007) - ASON routing architecture and requirements for remote route query
		 
 | 
| G.7715.2 | ASON routing architecture and requirements for remote route query
		 
 | 
| G.7716 | Architecture of management and control operations
		 
 | 
| G.Imp7716 | Implementers' Guide for Recommendation ITU-T G.7716/Y.1707 (01/2010) - Architecture of control plane operations
		 
 | 
| G.7718 | Framework for the management of management-control components and functions
		 
 | 
| G.7718.1 | Protocol-neutral management information model for the control plane view
		 
 | 
| G.7719 | Management information model for management-control components and functions
		 
 | 
| G.7721 | Management requirement and information model for synchronization
		 
 | 
| G.7721.1 | Data model of synchronization management
		 
 | 
| G.Imp8001 | Implementer's guide (2021) for Recommendation ITU-T G.8001/Y.1354 (2016)
		 
 | 
| G.8001 | Terms and definitions for Ethernet frames over transport
		 Recommendation G.8001/Y.1354 (2016) was superseded by Recommendations ITU-T G.8012/Y.1308 (2022) and ITU-T G.8021/Y.1341 (2022)
 | 
| G.8010 | Architecture of Ethernet layer networks
		 
 | 
| G.Imp8010 | Implementers' Guide for ITU-T Rec. G.8010/Y.1306 (02/2004) - Architecture of Ethernet layer networks
		 
 | 
| G.8011 | Ethernet service characteristics
		 
 | 
| G.8011.1 | Ethernet private line service
		 The contents of Recommendations ITU-T G.8011.1/Y.1307.1 (2013), G.8011.2/Y.1307.2 (2013), G.8011.3/Y.1307.3 (2013), G.8011.4/Y.1307.4 (2013) and G.8011.5/Y.1307.5 (2013) have been integrated into Recommendation ITU-T G.8011/Y.1703 (2015)
 | 
| G.8011.2 | Ethernet virtual private line service
		 The contents of Recommendations ITU-T G.8011.1/Y.1307.1 (2013), G.8011.2/Y.1307.2 (2013), G.8011.3/Y.1307.3 (2013), G.8011.4/Y.1307.4 (2013) and G.8011.5/Y.1307.5 (2013) have been integrated into Recommendation ITU-T G.8011/Y.1703 (2015)
 | 
| G.8011.3 | Ethernet virtual private LAN service
		 The contents of Recommendations ITU-T G.8011.1/Y.1307.1 (2013), G.8011.2/Y.1307.2 (2013), G.8011.3/Y.1307.3 (2013), G.8011.4/Y.1307.4 (2013) and G.8011.5/Y.1307.5 (2013) have been integrated into Recommendation ITU-T G.8011/Y.1703 (2015)
 | 
| G.8011.4 | Ethernet private tree and Ethernet virtual private tree services
		 The contents of Recommendations ITU-T G.8011.1/Y.1307.1 (2013), G.8011.2/Y.1307.2 (2013), G.8011.3/Y.1307.3 (2013), G.8011.4/Y.1307.4 (2013) and G.8011.5/Y.1307.5 (2013) have been integrated into Recommendation ITU-T G.8011/Y.1703 (2015)
 | 
| G.8011.5 | Ethernet private LAN service
		 
 | 
| G.Imp8011 | Implementers' Guide for ITU-T Rec. G.8011/Y.1307 - Ethernet service characteristics
		 
 | 
| G.Imp8011.1 | Implementers' Guide for ITU-T Rec. G.8011.1/Y.1307.1 (08/2004) - Ethernet private line service
		 
 | 
| G.Imp8011.2 | Implementers' Guide for ITU-T Rec. G.8011.2/Y.1307.2 (09/2005) - Ethernet virtual private line service
		 
 | 
| G.Imp8011.3 | Implementers' Guide for ITU-T Rec. G.8011.3/Y.1307.3 (02/2010) - Ethernet virtual private LAN service
		 
 | 
| G.Imp8011.4 | Implementers' Guide for ITU-T Rec. G.8011.4/Y.1307.4 - Ethernet virtual private rooted multipoint service
		 
 | 
| G.Imp8012 | Implementers' Guide for Recommendation ITU-T G.8012/Y.1308 (08/2004) - Ethernet UNI and Ethernet NNI
		 
 | 
| G.8012 | Ethernet UNI and Ethernet NNI
		 ITU-T G.8012/Y.1308 (02/2022) supersedes ITU-T G.8012.1/Y.1308.1 (12/2012), and together with ITU-T G.8021/Y.1341 (04/2022) also supersedes ITU-T G.8021.1/Y.1341.1 (10/2012)
 | 
| G.8012.1 | Interfaces for the Ethernet transport network
		 ITU-T G.8012.1/Y.1308.1 was superseded on 13 February 2022 by ITU-T G.8012/Y.1308 (02/2022)
 | 
| G.8013 | Operation, administration and maintenance (OAM) functions and mechanisms for Ethernet-based networks
		 
 | 
| G.8020.3 | Ethernet
		 
 | 
| G.8021 | Characteristics of Ethernet transport network equipment functional blocks
		 
 | 
| G.8021.1 | Types and characteristics of Ethernet transport network equipment
		 ITU-T G.8012/Y.1308 (02/2022) together with ITU-T G.8021/Y.1341 (04/2022) superseded ITU-T G.8021.1/Y.1341.1 on 22 April 2022
 | 
| G.8023 | Characteristics of equipment functional blocks supporting Ethernet physical layer and Flex Ethernet interfaces
		 
 | 
| G.8031 | Ethernet linear protection switching
		 
 | 
| G.8032 | Ethernet ring protection switching
		 
 | 
| G.Imp8032 | Implementers' Guide for ITU-T Rec. G.8032/Y.1344 (03/2010) - Ethernet ring protection switching
		 
 | 
| G.8040 | GFP frame mapping into Plesiochronous Digital Hierarchy (PDH)
		 
 | 
| G.8051 | Management aspects of the Ethernet transport (ET) capable network element
		 
 | 
| G.Imp8051 | Implementers' Guide for Recommendation ITU-T G.8051/Y.1345 (11/2009) - Management aspects of the Ethernet -over -Transport (EoT) capable network element
		 
 | 
| G.8052 | Protocol-neutral management information model for the Ethernet transport capable network element
		 
 | 
| G.8052.1 | Operation, administration, maintenance (OAM) management information and data models for the Ethernet-transport network element
		 
 | 
| G.8052.2 | Resilience information/data models for the Ethernet transport network element
		 
 | 
| G.8080 | Architecture for the automatically switched optical network
		 
 | 
| G.Imp8080 | Implementers'  Guide
		 
 | 
| G.8081 | Terms and definitions for automatically switched optical networks
		 
 | 
| G.8101 | Terms and definitions for MPLS transport profile
		 By decision of ITU-T SG15 at its plenary of 18.09.2020, Recommendation G.8101/Y.1355 is superseded by ITU-T G.8110.1 Amd.1 (2020)  and G.8112 (2020).
 | 
| G.Imp8101 | Implementers' guide for Recommendation ITU-T G.8101/Y.1355 (2016-11)
		 
 | 
| G.8110 | MPLS layer network architecture
		 
 | 
| G.8110.1 | Architecture of the Multi-Protocol Label Switching transport profile layer network
		 
 | 
| G.8112 | Interfaces for the MPLS transport profile layer network
		 
 | 
| G.8113.1 | Operations, administration and maintenance mechanisms for MPLS-TP in packet transport networks
		 
 | 
| G.8113.2 | Operations, administration and maintenance mechanisms for MPLS-TP networks using the tools defined for MPLS
		 
 | 
| G.8121 | Characteristics of MPLS-TP equipment functional blocks
		 
 | 
| G.8121.1 | Characteristics of MPLS-TP equipment functional blocks supporting ITU-T G.8113.1/Y.1372.1 OAM mechanisms
		 
 | 
| G.8121.2 | Characteristics of MPLS-TP equipment functional blocks supporting ITU-T G.8113.2/Y.1372.2 OAM mechanisms
		 
 | 
| G.8131 | Linear protection switching for MPLS transport profile
		 
 | 
| G.8132 | MPLS-TP shared ring protection
		 
 | 
| G.8133 | Dual-homing protection for multi-protocol label switching -transport profile pseudowires
		 
 | 
| G.8151 | Management aspects of the MPLS-TP network element
		 
 | 
| G.8152 | Protocol-neutral management information model for MPLS-TP network elements
		 
 | 
| G.8152.1 | Operation, administration, maintenance (OAM) management information and data models for the MPLS-TP network element
		 
 | 
| G.8152.2 | Resilience information/data models for the MPLS-TP network element
		 
 | 
| G.8201 | Error performance parameters and objectives for multi-operator international paths within optical transport networks
		 
 | 
| G.8251 | The control of jitter and wander within the optical transport network (OTN)
		 
 | 
| G.8260 | Definitions and terminology for synchronization in packet networks
		 
 | 
| G.8261 | Timing and synchronization aspects in packet networks
		 
 | 
| G.8261.1 | Packet delay variation network limits applicable to packet-based methods (Frequency synchronization)
		 
 | 
| G.8262 | Timing characteristics of synchronous equipment clocks
		 
 | 
| G.8262.1 | Timing characteristics of enhanced synchronous equipment slave clock
		 
 | 
| G.8263 | Timing characteristics of packet-based equipment clocks
		 
 | 
| G.8264 | Distribution of timing information through packet networks
		 
 | 
| G.8265 | Architecture and requirements for packet-based frequency delivery
		 
 | 
| G.8265.1 | Precision time protocol telecom profile for frequency synchronization
		 
 | 
| G.8266 | Timing characteristics of telecom grandmaster clocks for frequency synchronization
		 
 | 
| G.8271 | Time and phase synchronization aspects of telecommunication networks
		 
 | 
| G.8271.1 | Network limits for time synchronization in packet networks with full timing support from the network
		 
 | 
| G.8271.2 | Network limits for time synchronization in packet networks with partial timing support from the network
		 
 | 
| G.8272 | Timing characteristics of primary reference time clocks
		 
 | 
| G.8272.1 | Timing characteristics of enhanced primary reference time clocks
		 
 | 
| G.8272.2 | Timing characteristics of coherent network primary reference time clocks
		 
 | 
| G.8273 | Framework of phase and time clocks
		 
 | 
| G.8273.2 | Timing characteristics of telecom boundary clocks and telecom time synchronous clocks for use with full timing support from the network
		 
 | 
| G.8273.3 | Timing characteristics of telecom transparent clocks for use with full timing support from the network
		 
 | 
| G.8273.4 | Timing characteristics of telecom boundary clocks and telecom time synchronous clocks for use with partial timing support from the network
		 
 | 
| G.8275 | Architecture and requirements for packet-based time and phase distribution
		 
 | 
| G.8275.1 | Precision time protocol telecom profile for phase/time synchronization with full timing support from the network
		 
 | 
| G.8275.2 | Precision time protocol telecom profile for phase/time synchronization with partial timing support from the network
		 
 | 
| G.8300 | Characteristics of transport networks to support IMT-2020/5G
		 
 | 
| G.8310 | Architecture of the metro transport network
		 
 | 
| G.8312 | Interfaces for metro transport networks
		 
 | 
| G.8312.20 | Overview of fine grain MTN
		 
 | 
| G.8321 | Characteristics of metro transport network equipment functional blocks
		 
 | 
| G.8331 | Metro transport network linear protection
		 
 | 
| G.8350 | Management and Control of metro transport networks - Amendment 1
		 
 | 
| G.8371 | Synchronization aspects of metro transport network
		 
 | 
| G.8601 | Architecture of service management in multi-bearer, multi-carrier environment
		 
 | 
| G.9700 | Fast access to subscriber terminals (G.fast) - Power spectral density specification
		 
 | 
| G.9701 | Fast access to subscriber terminals (G.fast) - Physical layer specification
		 
 | 
| G.9702 | Transceiver and system specifications for backhaul applications based on G.fast (G.fastback)
		 
 | 
| G.9710 | Multi-gigabit fast access to subscriber terminals (MGfast) - Power spectral density specification
		 
 | 
| G.9711 | Multi-gigabit fast access to subscriber terminals (MGfast) - Physical layer specification
		 
 | 
| G.9730.1 | Dedicated scientific sensing submarine cable system
		 
 | 
| G.9730.2 | Scientific monitoring and reliable telecommunication submarine cable systems
		 
 | 
| G.Imp9801 | Implementers' Guide for Recommendation ITU-T G.9801 (Ethernet passive optical networks using OMCI)
		 
 | 
| G.9801 | Ethernet passive optical networks using OMCI
		 
 | 
| G.9802 | Multiple-wavelength passive optical networks (MW-PONs)
		 
 | 
| G.9802.1 | Wavelength division multiplexed passive optical networks (WDM PON): General requirements
		 
 | 
| G.9802.2 | Wavelength division multiplexed passive optical networks (WDM PON): physical media dependent (PMD) layer and transmission convergence (TC) layer specifications
		 
 | 
| G.9803 | Radio over fibre systems
		 
 | 
| G.9804.1 | Higher speed passive optical networks - Requirements
		 
 | 
| G.9804.2 | Higher speed passive optical networks - Common transmission convergence layer specification
		 
 | 
| G.9804.3 | 50-Gigabit-capable passive optical networks (50G-PON): Physical media dependent (PMD) layer specification
		 
 | 
| G.9805 | Coexistence of passive optical network systems
		 
 | 
| G.9806 | Higher-speed bidirectional, single fibre, point-to-point optical access system (HS-PtP)
		 
 | 
| G.9807.1 | 10-Gigabit-capable symmetric passive optical network (XGS-PON)
		 
 | 
| G.9807.2 | 10 Gigabit-capable passive optical networks (XG(S)-PON): Reach extension
		 
 | 
| G.9901 | Narrowband orthogonal frequency division multiplexing power line communication transceivers - Power spectral density specification
		 
 | 
| G.9902 | Narrowband orthogonal frequency division multiplexing power line communication transceivers for ITU-T G.hnem networks
		 
 | 
| G.9903 | Narrowband orthogonal frequency division multiplexing power line communication transceivers for G3-PLC networks
		 
 | 
| G.9904 | Narrowband orthogonal frequency division multiplexing power line communication transceivers for PRIME networks
		 
 | 
| G.9905 | Centralized metric-based source routing
		 
 | 
| G.9930 | Point-to-point fibre in the premises
		 
 | 
| G.9940 | High speed fibre-based in-premises transceivers - system architecture
		 
 | 
| G.9941 | High speed fibre-based in-premises transceivers - physical layer specification
		 
 | 
| G.9942 | High speed fibre-based in-premises transceivers - Data link layer
		 
 | 
| G.9951 | Phoneline networking transceivers - Foundation
		 This text was first approved and published as ITU-T Rec. G.989.1 and then renumbered as G.9951 on 2005-05-27 without further modification
 | 
| G.9952 | Phoneline networking transceivers - Payload format and link layer requirements
		 This text was first approved and published as ITU-T Rec. G.989.2 and then renumbered as G.9952 on 2005-05-27 without further modification
 | 
| G.9953 | Phoneline networking transceivers - Isolation function
		 This text was first approved and published as ITU-T Rec. G.989.3 and then renumbered as G.9953 on 2005-05-27 without further modification
 | 
| G.9954 | Home networking transceivers - Enhanced physical, media access, and link layer specifications
		 
 | 
| G.9955 | 
[Withdrawn] Narrowband orthogonal frequency division multiplexing power line communication transceivers - Physical layer specification
		 The contents of Recommendations ITU-T G.9955 (2011) and ITU-T G.9956 (2011) have been reorganized into Recommendations ITU-T G.9901, ITU-T G.9902, ITU-T G.9903 and ITU-T G.9904, which are technically equivalent.
 | 
| G.9956 | 
[Withdrawn] Narrowband orthogonal frequency division multiplexing power line communication transceivers - Data link layer specification
		 The contents of Recommendations ITU-T G.9955 (2011) and ITU-T G.9956 (2011) have been reorganized into Recommendations ITU-T G.9901, ITU-T G.9902, ITU-T G.9903 and ITU-T G.9904, which are technically equivalent.
 | 
| G.9958 | Generic architecture of home networks for energy management
		 
 | 
| G.9959 | Short range narrow-band digital radiocommunication transceivers - PHY, MAC, SAR and LLC layer specifications
		 
 | 
| G.9960 | Unified high-speed wireline-based home networking transceivers - System architecture and physical layer specification
		 
 | 
| G.9961 | Unified high-speed wireline-based home networking transceivers - Data link layer specification
		 
 | 
| G.9962 | Unified high-speed wire-line based home networking transceivers - Management specification
		 
 | 
| G.9963 | Unified high-speed wireline-based home networking transceivers - Multiple input/multiple output specification
		 
 | 
| G.9964 | Unified high-speed wireline-based home networking transceivers - Power spectral density specification
		 
 | 
| G.9970 | Generic home network transport architecture
		 
 | 
| G.9971 | Requirements of transport functions in IP home networks
		 
 | 
| G.9972 | Coexistence mechanism for wireline home networking transceivers
		 
 | 
| G.9973 | Protocol for identifying home network topology
		 
 | 
| G.9976 | Supporting ultra-high-definition video service over G.hn
		 
 | 
| G.9977 | Mitigation of interference between DSL and PLC
		 
 | 
| G.9978 | Secure admission in a G.hn network
		 
 | 
| G.9979 | Implementation of the generic mechanism in the IEEE 1905.1a-2014 standard to include applicable ITU-T Recommendations
		 
 | 
| G.9980 | Remote management of customer premises equipment over broadband networks - Customer premises equipment WAN management protocol
		 
 | 
| G.9991 | High-speed indoor visible light communication transceiver - System architecture, physical layer and data link layer specification
		 
 | 
| G.9992 | Indoor optical camera communication transceivers - System architecture, physical layer and data link layer specification
		 
 | 
| G.100SerSup31 | Principles of determining an impedance strategy for the local network
		 
 | 
| G.100SerSup32 | Transmission aspects of digital mobile radio systems
		 
 | 
| G.Sup1 | Calculation of the stability of international connections established in accordance with the transmission and switching plan
		 
 | 
| G.Sup2 | 
[Withdrawn] Talker echo on international connections
		 
 | 
| G.Sup3 | 
[Withdrawn] Evaluation of echo control devices
		 
 | 
| G.Sup4 | Certain methods of avoiding the transmission of excessive noise between interconnected systems
		 Green Book Volume III.2, page 572
 | 
| G.Sup5 | Measurement of the load of telephone circuits under field conditions
		 Red Book Fascicle III.2, page 295
 | 
| G.Sup6 | 
[Withdrawn] Example showing how the total value of line noise specified for the hypothetical reference circuit on open-wire lines might be broken down into its various components
		 Green Book Volume III.2, page 589
 | 
| G.Sup7 | Loss-frequency response of channel-translating equipment used in some countries for international circuits
		 Green Book Volume III.2, page 590
 | 
| G.Sup8 | Method proposed by the Belgian telephone administration for interconnection between coaxial and symmetric pair systems
		 Green Book Volume III.2, page 591
 | 
| G.Sup9 | 
[Withdrawn] Roll effect in coaxial pair systems
		 Green Book Volume III.2, page 592
 | 
| G.Sup10 | 
[Withdrawn] Application of Recommendation B.4 concerning the use of decibel
		 
 | 
| G.Sup11 | 
[Withdrawn] Data on cable ships and submersible equipments of various countries
		 This Supplement was withdrawn because its was no longer relevant
 | 
| G.Sup13 | 
[Withdrawn] Noise at the terminals of the battery supply
		 Orange Book Fascicle III.3, page 664
 | 
| G.Sup14 | 
[Withdrawn] Methods for measuring regularity return loss
		 
 | 
| G.Sup15 | 
[Withdrawn] Almost-differential quasi-ternary code (ADQ code)
		 This Supplement was withdrawn because its was technically obsolete
 | 
| G.Sup17 | Group-delay distortion performance of terminal equipment
		 Red Book Fascicle III.2, page 311
 | 
| G.Sup18 | 
[Withdrawn] Information on submarine cables used in deep water
		 Red Book Fascicle III.2, page 313
 | 
| G.Sup19 | Digital crosstalk measurement (method used by the Administrations of France, the Netherlands and Spain)
		 Red Book Fascicle III.2, page 326
 | 
| G.Sup20 | 
[Withdrawn] Possible combinations of basic transmission impairments in hypothetical reference connections
		 
 | 
| G.Sup21 | 
[Withdrawn] The use of quantizing distortion units in the planning of international connections
		 
 | 
| G.Sup22 | Mathematical models of multiplex signals
		 Red Book Fascicle III.2, page 326
 | 
| G.Sup23 | 
[Withdrawn] Explanatory notes for the information of designers of a maritime mobile satellite system
		 
 | 
| G.Sup24 | 
[Withdrawn] Consideration concerning quantizing distortion units of some digital devices that process encoded signals
		 
 | 
| G.Sup26 | Estimating the signal load margin of FDM wideband amplifier equipment and transmission systems
		 Red Book Fascicle III.2, page 344
 | 
| G.Sup27 | Interference from external sources	
		 This Supplement is also published as G.500 series supplement in Red Book fascicle III.2
 | 
| G.Sup28 | Application of transmultiplexers, FDM codecs, data-in-voice (DIV) systems and data-over-voice (DOV) systems during the transition from an analogue to a digital network
		 Red Book Fascicle III.3, page 397
 | 
| G.100SerSup29 | Planning of mixed analogue-digital circuits (chains, connections)
		 
 | 
| G.Sup29 | Objective for the mixed analogue/digital chain of 4-wire circuits
		 
 | 
| G.Sup30 | 
[Withdrawn] Transmission plan aspects of land mobile telephony networks
		 
 | 
| G.Sup31 | 
[Withdrawn] Status of work of presently considered digital circuit multiplication equipment (DCME) documents
		 
 | 
| G.Sup32 | Transfer of alarm information on 60-channel transmultiplexing equipment
		 
 | 
| G.Sup33 | 
[Withdrawn] Examples of fibre design guidelines (diagrams used in Japan and in the United Kingdom)
		 This Supplement was withdrawn because its was technically obsolete
 | 
| G.Sup34 | Temperature in underground containers for the installation of repeaters
		 
 | 
| G.Sup35 | Guidelines concerning the measurement of wander
		 
 | 
| G.Sup36 | Jitter and wander accumulation in digital networks
		 
 | 
| G.Sup37 | ITU-T Recommendation G.763 digital circuit multiplication equipment (DCME) tutorial and dimensioning
		 
 | 
| G.Sup38 | Variable bit rate calculations for the ITU-T Recommendation G.767 Digital Circuit Multiplication Equipment (DCME)
		 
 | 
| G.Sup39 | Optical system design and engineering considerations
		 
 | 
| G.Sup40 | Optical fibre and cable Recommendations and standards guideline
		 
 | 
| G.Sup41 | Design guidelines for optical fibre submarine cable systems
		 
 | 
| G.Sup42 | Guide on the use of the ITU-T Recommendations related to optical fibres and systems technology
		 
 | 
| G.Sup43 | Transport of IEEE 10GBASE-R in optical transport networks (OTN)
		 
 | 
| G.Sup44 | Test plan to verify B-PON interoperability
		 
 | 
| G.Sup45 | Power conservation in optical access systems
		 
 | 
| G.Sup46 | G-PON interoperability test plan between optical line terminations and optical network units
		 
 | 
| G.Sup47 | General aspects of optical fibres and cables
		 
 | 
| G.Sup48 | 10-Gigabit-capable passive optical networks: Interface between media access control with serializer/deserializer and physical medium dependent sublayers
		 
 | 
| G.Sup49 | Rogue optical network unit (ONU) considerations
		 
 | 
| G.Sup50 | Overview of digital subscriber line Recommendations
		 
 | 
| G.Sup51 | Passive optical network protection considerations
		 
 | 
| G.Sup52 | Ethernet ring protection switching
		 
 | 
| G.Sup53 | Guidance for Ethernet OAM performance monitoring
		 
 | 
| G.Sup54 | Ethernet linear protection switching
		 
 | 
| G.Sup55 | Radio-over-fibre (RoF) technologies and their applications
		 
 | 
| G.Sup56 | OTN transport of CPRI signals
		 
 | 
| G.Sup57 | Smart home profiles for 6LoWPAN devices
		 
 | 
| G.Sup58 | Optical transport network module framer interfaces
		 
 | 
| G.Sup59 | Guidance on optical fibre and cable reliability
		 
 | 
| G.Sup60 | Ethernet linear protection switching with dual node interconnection
		 
 | 
| G.Sup61 | ITU-T G.1020 - Internet protocol aware quality of service management
		 
 | 
| G.Sup62 | Gfast certification
		 
 | 
| G.Sup63 | ITU-T G.989.3 TC layer operating in ITU T G.987.3 or ITU-T G.9807.1 TC layer mode
		 
 | 
| G.Sup64 | PON transmission technologies above 10 Gb/s per wavelength
		 
 | 
| G.Sup65 | Simulations of transport of time over packet networks
		 
 | 
| G.Sup66 | 5G wireless fronthaul requirements in a passive optical network context
		 
 | 
| G.Sup67 | Application of optical transport network Recommendations to 5G transport
		 
 | 
| G.Sup68 | Synchronization operations, administration and maintenance requirements
		 
 | 
| G.Sup69 | Migration of a pre-standard network to a metro transport network
		 
 | 
| G.Sup70 | Supplement on sub 1 Gbit/s services transport over optical transport network
		 
 | 
| G.Sup71 | Optical line termination capabilities for supporting cooperative dynamic bandwidth assignment
		 
 | 
| G.Sup72 | Modelling consideration for optical media networks
		 
 | 
| G.Sup73 | Influencing factors on quality of experience for multiview video (MVV) services
		 
 | 
| G.Sup74 | Network slicing in a passive optical network context
		 
 | 
| G.Sup75 | 5G small cell backhaul/midhaul over TDM-PON
		 
 | 
| G.Sup76 | Optical transport network security
		 
 | 
| G.Sup77 | Supplement 77 to ITU-T G-series of Recommendations - Influencing factors on quality of experience (QoE) for video customized alerting tone (CAT) and video customized ringing signal (CRS) services
		 
 | 
| G.Sup78 | Use case and requirements of fibre-to-the-room for small business applications
		 
 | 
| G.Sup79 | Latency control and deterministic capability over a PON system
		 
 | 
| G.Sup80 | Use case and requirements of fibre-based in-premises networking for home application (FIP4H)
		 
 | 
| G.Sup81 | Practical aspects of PON security
		 
 | 
| G.Sup82 | Enhanced optical line termination with information technology functions
		 
 | 
| G.Sup83 | Supplement on the use of options in the precision time protocol profile with full timing support from the network
		 
 | 
| G.Sup84 | Operational aspects of optical access
		 
 | 
| G.Sup85 | FgODUflex over point-to-multipoint networks
		 
 | 
| G.Sup86 | Fibre to the power grid (FTTGrid) use cases and network requirements
		 
 | 
| G.Sup87 | Standardization framework for optical fibres for space division multiplexing
		 
 |