UIT-T SG16 C

English Français

Página principal : UIT-T : SG16 : Contribuciones

Nuevo - Busque los documentos de la reunión

UIT-T SG16 C

UIT-T SG16	Número máximo de documentos/página:
Terminales, sistemas y aplicaciones multimedia
Periodo de estudios 2005

Resultados :27 documentos

Contribuciones [ Origen: Juniper Networks ]
	Número	Título	Origen	AI/Cuestión	Fecha
	[ 364 ]	Draft H.248.Statistics - Reorganization and cleaning of text	Juniper Networks	Q3/16	2008-04-11
	[ 363 ]	Draft H.248.57 - Change and clarify procedures for indicating whether RTCP is used and allow port allocation using SDP's "a=rtcp:" attribute	Juniper Networks	Q3/16	2008-04-11
	[ 362 ]	Draft H.248.57 - Clarification of the procedures' overview	Juniper Networks	Q3/16	2008-04-11
	[ 361 ]	Draft H.248.53 - Calculation of bucket sizes for IP bearer traffic policing	Juniper Networks	Q3/16	2008-04-11
	[ 360 ]	Draft H.248.53 - Default values for tman properties	Juniper Networks	Q3/16	2008-04-11
	[ 359 ]	Draft H.248.43 - Removing the ipf and opf packages	Juniper Networks	Q3/16	2008-04-11
	[ 358 ]	Draft H.248.43 - Removing support for Gate Management properties on the Root termination	Juniper Networks	Q3/16	2008-04-11
	[ 357 ]	Draft H.248.43 - Removing the ifb/rr and the ofb/rr properties	Juniper Networks	Q3/16	2008-04-11
	[ 356 ]	Draft H.248.43 - Changing the type of several Gate Management properties from sub-list to single value	Juniper Networks	Q3/16	2008-04-11
	[ 355 ]	Draft H.248.43 - Change the type of the properties of ifb and ofb to enumeration	Juniper Networks	Q3/16	2008-04-11
	[ 354 ]	Draft H.248.43 - RTP and RTCP decimal values for the ipf/ulptm and opf/ulptm properties	Juniper Networks	Q3/16	2008-04-11
	[ 353 ]	Draft H.248.43 - Changes to the enabling of destination address/port filtering	Juniper Networks	Q3/16	2008-04-11
	[ 352 ]	Draft H.248.43 - Suggesting new names for properties of the dapf package	Juniper Networks	Q3/16	2008-04-11
	[ 351 ]	Draft H.248.43 - Clarification of error condition when no Remote Source information is present	Juniper Networks	Q3/16	2008-04-11
	[ 350 ]	Draft H.248.43 - Behaviour when gm/saf and gm/spf are missing or set to OFF	Juniper Networks	Q3/16	2008-04-11
	[ 349 ]	Draft H.248.41 Amendment 1 - Sending only deltas in iprap/arc notifications	Juniper Networks	Q3/16	2008-04-11
	[ 348 ]	Draft H.248.37 Amendment 1 - Change adr/crsa into a statistic	Juniper Networks	Q3/16	2008-04-11
	[ 347 ]	Draft H.248.37 Amendment 1 - Changes to the syntax of adr/crsa and adr/rsac	Juniper Networks	Q3/16	2008-04-11
	[ 346 ]	Draft H.248.37 Amendment 1 - Changes to the adr/rsac ABNF	Juniper Networks	Q3/16	2008-04-11
	[ 345 ]	Draft H.248.37 Amendment 1 - Remove requirements for non-default types of ipnapt/latch	Juniper Networks	Q3/16	2008-04-11
	[ 344 ]	Draft H.248.37 Amendment 1 - Clarify implicit filtering based on latched transport address	Juniper Networks	Q3/16	2008-04-11
	[ 343 ]	Draft H.248.37 Amendment 1 - Change adr package properties' names so that their roles are clearer	Juniper Networks	Q3/16	2008-04-11
	[ 342 ]	H.248.8 Implementors' Guide - Allow the MG to issue error #511	Juniper Networks	Q3/16	2008-04-11
	[ 341 ]	H.248.1 Implementors' Guide - Allowing a sub-list of length one to be encoded as a simple value	Juniper Networks	Q3/16	2008-04-11
	[ 340 ]	H.248.1 Implementors' Guide - A uniform method for referencing elements of a base package	Juniper Networks	Q3/16	2008-04-11
	[ 146 ]	Proposed changes to ITU-T Rec. H.248.37 Amendment 1 - IP NAPT traversal package: Update of the Remote Descriptor with the latched address information as a result of latch/relatch signal completion	Juniper Networks	Q3/16	2007-06-13
	[ 145 ]	Corrections to ITU-T Rec. H.248.37 Amendment 1 - Address Reporting (adr) package: ObservedEventsDescriptor parameters: typeof nrsa	Juniper Networks	Q3/16	2007-06-13
Resultados :27 documentos

Telecarga de múltiples documentos: Marcar las casillas correspondientes a los documentos seleccionados, a continuación pulsar "Telecargar"

Preferencias del usuario:

Telecarga de múltiples documentos: Formatos e idiomas que hay que tener en cuenta (si están disponibles):

(E: inglés - F: francés - S: español - A: árabe - C: chino - R: ruso)

Pruebe ITU Translate, la herramienta de traducción automática de documentos