Page 52 - ITU-T Focus Group on Aviation Applications of Cloud Computing for Flight Data Monitoring - Use cases and requirements

ITU-T Focus Group on Aviation Applications of Cloud Computing for Flight Data Monitoring
Use cases and requirements

(33) Hydraulic pressure low (each system);

(34) Ground speed (when an information source is installed);
(35) Ground proximity warning system;
(36) Landing gear position or landing gear cockpit control selection;

(37) Drift angle (when an information source is installed);
(38) Wind speed and direction (when an information source is installed);
(39) Latitude and longitude (when an information source is installed);

(40) Stick shaker/pusher (when an information source is installed);
(41) Wind shear (when an information source is installed);
(42) Throttle/power lever position;

(43) Additional engine parameters (as designated in appendix F of this part);
(44) Traffic alert and collision avoidance system;
(45) DME 1 and 2 distances;

(46) Navigation 1 and 2 selected frequency;
(47) Selected barometric setting (when an information source is installed);
(48) Selected altitude (when an information source is installed);

(49) Selected speed (when an information source is installed);
(50) Selected mach (when an information source is installed);
(51) Selected vertical speed (when an information source is installed);

(52) Selected heading (when an information source is installed);
(53) Selected flight path (when an information source is installed);

(54) Selected decision height (when an information source is installed);
(55) Electronic flight instrument system (EFIS) display format;
(56) Multi-function/engine/alerts display format;
(57) Thrust command (when an information source is installed);

(58) Thrust target (when an information source is installed);
(59) Fuel quantity in (the centre of gravity(CG)) trim tank (when an information source is installed);

(60) Primary navigation system reference;
(61) Icing (when an information source is installed);
(62) Engine warning each engine vibration (when an information source is installed);
(63) Engine warning each engine over temperature (when an information source is installed);

(64) Engine warning each engine oil pressure low (when an information source is installed);
(65) Engine warning each engine over speed (when an information source is installed;

(66) Yaw trim surface position;
(67) Roll trim surface position;
(68) Brake pressure (selected system);
(69) Brake pedal application (left and right);

42