Page 381 - 5G Basics - Core Network Aspects
P. 381

Core network aspects                                            1


            15)     MSCD-FE sends an initiation request message for SC-3 to MUE-C.

            16)     MUE-C returns an initiation response message for SC-3 to MSCD-FE.
            17)     The streaming component of SC-3 is delivered from MSCD-FE to MUE-C through multiple networks.

            9.4     Streaming transfer
            After establishment, a streaming flow can be transferred from one connection to another among multiple
            connections, according to the subscriber's demand or network status, while the streaming service itself is not
            affected.
            9.4.1   MUE initiated streaming transfer

            After  simultaneously  connecting  to  multiple  access  networks,  according  to  a  subscriber's  demand
            (for example, if the bit rate of the connection for the streaming transmission is too slow), a MUE can request
            the transfer of one or more streaming flows from one access network to another. In this case, the MUE is
            able to request a modification of the existing connection parameters. The information flow of a MUE initiated
            transfer is shown in Figure 9-4.







































                                        Figure 9-4 – MUE initiated streaming transfer
            1)      MUE sends a streaming transfer request message to the originating SCF, i.e., SCF(1), to request to
                    transfer a streaming flow from one access network to another.
            2)      SCF(1) forwards this request message to MAS-F.
            3)      MAS-F obtains MUE and streaming flow related information from MUP-FE and MSUP-FE.
            4)      MAS-F makes the decision which connection can be used to transport the streaming flow to be
                    transferred, according to the information already obtained.
            5)      MAS-F  sends  a  resource  modification  request,  which  contains  the  updated  information  of  the
                    connection, to the destination SCF, i.e., SCF(2).
            6)      SCF(2) forwards this request message to MPC-FE.
            7)      MPC-FE makes policy rules based on QoS requirements, then sends a request to MMF to install the
                    QoS rules.


                                                                                                         371
   376   377   378   379   380   381   382   383   384   385   386