Page 1015 - 5G Basics - Core Network Aspects
P. 1015

Transport aspects                                              2


            Bytes 11-14 are allocated for the optional-attribute and attribute execution masks; however, the contents
            of  these  bytes  are  only  valid  in  conjunction  with  result  code  1001  used  to  indicate  failed  or  unknown
            attributes.  When  the  result  code  is  not  1001,  these  bytes  shall  be  set  to  0  by  the  NT  transmitter  and
            ignored by the DPU receiver.

            S.5.3   Start software download


                                        Table S.6 – Start software download message

                     Field          Byte   7   6   5   4   3   2   1   0              Comments
             Datagram protocol       1     0   0   0   0   0   0   0   1   NT software management = 0116
             identifier

             Transaction correlation   2-3
             identifier

             Message type            4     0   1   0   1   0   0   1   1   AR = 1, AK = 0, MT = 19
                                                                         Action = start software download.

             Managed software        5                                   Software image instance
             image instance                                                 0      instance 0

                                                                            1      instance 1
                                                                            2..254  vendor-specific use
                                                                            255    reserved by ITU-T
             Message contents       6-7                                  Length of message contents field in bytes
             length                                                      = 5 (Note 1).
             Message contents        8                                   Window size (represented as a number of
                                                                         sections) minus one (Note 2).
                                    9-12                                 Image size in bytes   (Note 3).

             NOTE 1 – This field shall be coded as an unsigned integer on 16 bits [b 15 … b 0], where b 0 is the LSB. Byte 6 shall represent [b 15 …
             b 8] and byte 7 shall represent [b 7 … b 0].
             NOTE 2 – This value shall be coded as an unsigned integer on 8 bits [b 7 … b 0], where b 0 is the LSB.
             NOTE 3 – This value shall be coded as an unsigned integer on 32 bits [b 31 … b 0], where b 0 is the LSB. Byte 9 shall represent [b 31 …
             b 24] and byte 12 shall represent [b 7 … b 0].
            S.5.4   Start software download response

            The response contains a result code in byte 8, and a window size counter-proposal (which may be the same
            as that suggested by the DPU in the original request) in byte 9.


                                   Table S.7 – Start software download response message
                     Field          Byte   7   6   5   4   3   2   1   0              Comments

             Datagram protocol       1     0   0   0   0   0   0   0   1   NT software management = 0116
             identifier
             Transaction correlation   2-3
             identifier
             Message type            4     0   0   1   1   0   0   1   1   AR = 0, AK = 1, MT = 19
                                                                         bits 5-1: action = start software download
                                                                         response.







                                                                                                        1005
   1010   1011   1012   1013   1014   1015   1016   1017   1018   1019   1020