-- =============================================================================
-- ITU-T Rec. X.738 (1993) | ISO/IEC 10164-13 : 1995
-- =============================================================================
--<GDMO.Alias "ITU-T Rec. X.738 (1993) | ISO/IEC 10164-13 : 1995"
-- "Rec. X.738|ISO/IEC 10164-13:1992",
-- "Rec. X.738 (1993)",
-- "Recommendation X.738:1993",
-- "ITU-T Rec. X.738:1993",
-- "ITU-T Recommendation X.738">--
-- =========================================================
--<GDMO.Document "ITU-T Rec. X.738 (1993) | ISO/IEC 10164-13 : 1995">--
--<GDMO.Alias "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992"
-- "CCITT Rec. X.721 | ISO/IEC 10165-2:1992",
-- "CCITT Rec. X.721 (1992) | ISO/IEC 10165-2:1992">--
--<GDMO.Alias "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11:1994"
-- "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11:1994">--
bufferedScanner MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11:1994":scanner;
CHARACTERIZED BY
bufferedScannerPackage PACKAGE
BEHAVIOUR
bufferedScannerBehaviour BEHAVIOUR
DEFINED AS
"See 8.1.9.3.";;
ATTRIBUTES
bufferedObservationIdList GET-REPLACE ADD-REMOVE,
reportPeriod GET-REPLACE,
suppressObjectInstance GET-REPLACE;
ACTIONS
reportBuffer
scanActionError;
NOTIFICATIONS
bufferedScanReport;;;
CONDITIONAL PACKAGES
timeStampReportPackage PRESENT IF "time stamping supported";
REGISTERED AS { summarizationManagedObjectClass 1 };
bufferedScanReportRecord MANAGED OBJECT CLASS
DERIVED FROM "CCITT Rec. X.721 (1992) | ISO/IEC 10165-2:1992":eventLogRecord;
CHARACTERIZED BY
bufferedScanReportPackage PACKAGE
BEHAVIOUR
bufferedScanReportRecordBehaviour BEHAVIOUR
DEFINED AS
"This managed object is used to represent logged information that
resulted from buffered scan report notifications or event reports.";;
ATTRIBUTES
"ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11:1994":granularityPeriod GET,
bufferedObservationList GET;;;
CONDITIONAL PACKAGES
firstScanInitiationTimePackage PRESENT IF "the firstScanInitiationTime
parameter is present in report",
suspectIntervalsPackage PRESENT IF"the number of suspect intervals is
non-zero and therefore present in the report.",
incompleteScanPackage PRESENT IF "the scan could not be completed.";
REGISTERED AS { summarizationManagedObjectClass 2 };
dynamicScanner MANAGED OBJECT CLASS
DERIVED FROM "CCITT Rec. X.721 (1992) | ISO/IEC 10165-2:1992":top;
CHARACTERIZED BY
dynamicScannerPackage PACKAGE
BEHAVIOUR
dynamicScannerBehaviour BEHAVIOUR
DEFINED AS
"See 8.1.10.3.";;
ATTRIBUTES
"ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11:1994":scannerId GET,
"CCITT Rec. X.721 (1992) | ISO/IEC 10165-2:1992":operationalState GET,
"CCITT Rec. X.721 (1992) | ISO/IEC 10165-2:1992":administrativeState
GET-REPLACE;;;
REGISTERED AS { summarizationManagedObjectClass 3 };
dynamicSimpleScanner MANAGED OBJECT CLASS
DERIVED FROM dynamicScanner;
CHARACTERIZED BY
dynamicSimpleScannerPackage PACKAGE
BEHAVIOUR
dynamicSimpleScannerBehaviour BEHAVIOUR
DEFINED AS
"See 8.1.11.3.";;
ACTIONS
activateDynamicSimpleScanReport
scanActionError;;;
REGISTERED AS { summarizationManagedObjectClass 4 };
ensembleStatisticScanner MANAGED OBJECT CLASS
DERIVED FROM homogeneousScanner;
CHARACTERIZED BY
ensembleStatisticScannerPackage PACKAGE
BEHAVIOUR
ensembleBehaviour BEHAVIOUR
DEFINED AS
"See 8.1.3.3.";;
ATTRIBUTES
numericAttributeIdList GET-REPLACE ADD-REMOVE,
suppressObjectInstance GET-REPLACE;
ACTIONS activateStatisticalReport
scanActionError;
NOTIFICATIONS statisticalReport;;;
REGISTERED AS { summarizationManagedObjectClass 5 };
heterogeneousScanner MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11:1994":scanner;
CHARACTERIZED BY
heterogeneousScannerPackage PACKAGE
BEHAVIOUR
heterogeneousScannerBehaviour BEHAVIOUR
DEFINED AS
"See 8.1.8.3.";;
ATTRIBUTES
observationIdList GET-REPLACE ADD-REMOVE,
suppressObjectInstance GET-REPLACE;
ACTIONS
activateScanReport
scanActionError;
NOTIFICATIONS
scanReport;;;
CONDITIONAL PACKAGES
timeStampReportPackage PRESENT IF "time stamping supported",
onceReportAttributeIdListPackage PRESENT IF "the once report attribute Id
list mechanism is supported";
REGISTERED AS { summarizationManagedObjectClass 6 };
homogeneousScanner MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11:1994":scanner;
CHARACTERIZED BY
homogeneousScannerPackage PACKAGE
BEHAVIOUR
homogeneousScannerBehaviour BEHAVIOUR
DEFINED AS
"See 8.1.1.3.";;
ATTRIBUTES
scanAttributeIdList GET-REPLACE ADD-REMOVE;;; -- this may be empty
CONDITIONAL PACKAGES
timeStampReportPackage PRESENT IF "time stamping supported",
scopedSelectionPackage PRESENT IF "the managedObjectInstanceSelectionPackage
is not present in an instance",
timingSelectionPackage PRESENT IF "timing attributes present",
managedObjectInstanceSelectionPackage PRESENT IF "the scopedSelectionPackage
is not present in an instance";
REGISTERED AS { summarizationManagedObjectClass 7 };
meanScanner MANAGED OBJECT CLASS
DERIVED FROM ensembleStatisticScanner;
CHARACTERIZED BY
meanScannerPackage PACKAGE
BEHAVIOUR
meanScannerBehaviour BEHAVIOUR
DEFINED AS
"See 8.1.4. 2and 8.1.4.3.";;;;
REGISTERED AS { summarizationManagedObjectClass 8 };
meanVarianceScanner MANAGED OBJECT CLASS
DERIVED FROM meanScanner;
CHARACTERIZED BY
meanVarianceScannerPackage PACKAGE
BEHAVIOUR
meanVarianceScannerBehaviour BEHAVIOUR
DEFINED AS
"See 8.1.5.2 and 8.1.5.3.";;;;
REGISTERED AS { summarizationManagedObjectClass 9 };
minMaxScanner MANAGED OBJECT CLASS
DERIVED FROM ensembleStatisticScanner;
CHARACTERIZED BY
minMaxScannerPackage PACKAGE
BEHAVIOUR
minMaxScannerBehaviour BEHAVIOUR
DEFINED AS
"See 8.1.7.2 and 8.1.7.3.";;;;
CONDITIONAL PACKAGES
meanCalculationPackage PRESENT IF "mean calculation is supported";
REGISTERED AS { summarizationManagedObjectClass 10 };
percentileScanner MANAGED OBJECT CLASS
DERIVED FROM ensembleStatisticScanner;
CHARACTERIZED BY
percentileScannerPackage PACKAGE
BEHAVIOUR
percentileScannerBehaviour BEHAVIOUR
DEFINED AS
"See 8.1.6.2 and 8.1.6.3.";;
ATTRIBUTES
"ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11:1994":configurablePCT GET-REPLACE;;;
CONDITIONAL PACKAGES
meanCalculationPackage PRESENT IF "mean calculation is supported";
REGISTERED AS { summarizationManagedObjectClass 11 };
scanReportRecord MANAGED OBJECT CLASS
DERIVED FROM "CCITT Rec. X.721 (1992) | ISO/IEC 10165-2:1992":eventLogRecord;
CHARACTERIZED BY
scanReportRecordPackage PACKAGE
BEHAVIOUR
scanReportRecordBehaviour BEHAVIOUR
DEFINED AS
"This managed object is used to represent logged information that
resulted from scan report notifications or event reports.";;
ATTRIBUTES
observationScanList GET;;;
CONDITIONAL PACKAGES
scanInitiationTimePackage PRESENT IF "the scanInitiationTime parameter is
present in report",
onceReportAttributeListPackage PRESENT IF "the onceReportAttributeList
parameter is present in report",
incompleteScanPackage PRESENT IF "the scan could not be completed.";
REGISTERED AS { summarizationManagedObjectClass 13 };
simpleScanner MANAGED OBJECT CLASS
DERIVED FROM homogeneousScanner;
CHARACTERIZED BY
simpleScannerPackage PACKAGE
BEHAVIOUR
simpleScannerBehaviour BEHAVIOUR
DEFINED AS
"See 8.1.2.3.";;
ATTRIBUTES
numericAttributeIdArray GET-REPLACE,--This list may be empty.
suppressObjectInstance GET-REPLACE;
ACTIONS
activateScanReport
scanActionError;
NOTIFICATIONS
scanReport;;;
CONDITIONAL PACKAGES
onceReportAttributeIdListPackage PRESENT IF "once report is supported";
REGISTERED AS { summarizationManagedObjectClass 14 };
statisticalReportRecord MANAGED OBJECT CLASS
DERIVED FROM "CCITT Rec. X.721 (1992) | ISO/IEC 10165-2:1992":eventLogRecord;
CHARACTERIZED BY
statisticalReportPackage PACKAGE
BEHAVIOUR
statisticalReportRecordBehaviour BEHAVIOUR
DEFINED AS
"This managed object is used to represent logged information that
resulted from statistical report notifications or event reports.";;
ATTRIBUTES
algorithmOutputs GET;;;
CONDITIONAL PACKAGES
scanInitiationTimePackage PRESENT IF "the scanInitiationTime parameter is
present in the report",
observationReportListPackage PRESENT IF "the observationReportList parameter
is present in the report",
algorithmParametersPackage PRESENT IF "the algorithmParameters parameter is
present in the behaviour",
incompleteScanPackage PRESENT IF "the scan could not be completed.";
REGISTERED AS { summarizationManagedObjectClass 15 };
-- The following calculation package defines behaviour associated with
-- calculation of statistics for each numeric attribute type across all selected
-- managed objects.
meanCalculationPackage PACKAGE
BEHAVIOUR
meanCalculationBehaviour BEHAVIOUR
DEFINED AS
"See 8.1.4.3.";;
REGISTERED AS { summarizationPackage 1 };
algorithmParametersPackage PACKAGE
ATTRIBUTES
algorithmParameters GET;
REGISTERED AS { summarizationPackage 2 };
firstScanInitiationTimePackage PACKAGE
ATTRIBUTES
firstScanInitiationTime GET;
REGISTERED AS { summarizationPackage 3 };
incompleteScanPackage PACKAGE
ATTRIBUTES
incompleteScan GET;
REGISTERED AS { summarizationPackage 14 };
managedObjectInstanceSelectionPackage PACKAGE
ATTRIBUTES
objectList GET-REPLACE ADD-REMOVE;
REGISTERED AS { summarizationPackage 4 };
observationReportListPackage PACKAGE
ATTRIBUTES
observationReportList GET;
REGISTERED AS { summarizationPackage 5 };
onceReportAttributeIdListPackage PACKAGE
ATTRIBUTES
onceReportAttributeIdList GET-REPLACE ADD-REMOVE;
REGISTERED AS { summarizationPackage 6 };
onceReportAttributeListPackage PACKAGE
ATTRIBUTES
onceReportAttributeList GET;
REGISTERED AS { summarizationPackage 7 };
scanInitiationTimePackage PACKAGE
ATTRIBUTES
scanInitiationTime GET;
REGISTERED AS { summarizationPackage 9 };
scopedSelectionPackage PACKAGE
BEHAVIOUR
scopedSelectionBehaviour BEHAVIOUR
DEFINED AS
"See 8.1.1.3.";;
ATTRIBUTES
baseManagedObject GET-REPLACE,
scope GET-REPLACE,
scanningFilter
DEFAULT VALUE SummarizationASN1Productions.scanningFilterDefault GET-REPLACE;
REGISTERED AS { summarizationPackage 10 };
suspectIntervalsPackage PACKAGE
ATTRIBUTES
suspectIntervals GET;
REGISTERED AS { summarizationPackage 11 };
timeStampReportPackage PACKAGE
ATTRIBUTES
timeStampReportMode
DEFAULT VALUE SummarizationASN1Productions.timeStampingDefault GET-REPLACE;
REGISTERED AS { summarizationPackage 12 };
timingSelectionPackage PACKAGE
BEHAVIOUR
timingSelectionBehaviour BEHAVIOUR
DEFINED AS
"See 8.1.1.3.";;
ATTRIBUTES
beginTimeOffset GET-REPLACE,
endTimeOffset GET-REPLACE,
timeAttributeIdentifier GET-REPLACE;
REGISTERED AS { summarizationPackage 13 };
algorithmOutputs ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.AlgorithmOutputBuffer;
BEHAVIOUR
algorithmOutputsBehaviour BEHAVIOUR
DEFINED AS
"This attribute includes the outputs of a statistical algorithm that was
applied to scanned attribute values. See 8.2.2.2.3.";;
REGISTERED AS { summarizationAttribute 1 };
algorithmParameters ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.AlgorithmParameters;
BEHAVIOUR
algorithmParametersBehaviour BEHAVIOUR
DEFINED AS
"This attribute includes one or more parameters of a statistical
algorithm that was applied to scanned attribute values. See 8.2.2.2.4.";;
REGISTERED AS { summarizationAttribute 2 };
baseManagedObject ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.ObjectInstance;
MATCHES FOR EQUALITY;
BEHAVIOUR
baseManagedObjectBehaviour BEHAVIOUR
DEFINED AS
"This attribute identifies an existing managed object which is the base
of the scoping process for selecting managed objects. See 8.1.12.3";;
REGISTERED AS { summarizationAttribute 3 };
beginTimeOffset ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.TimePeriod;
MATCHES FOR EQUALITY;
BEHAVIOUR
beginTimeOffsetBehaviour BEHAVIOUR
DEFINED AS
"The value of this attribute, subtracted from the current time,
indicates the beginning of a time window. See 8.1.12.5.";;
REGISTERED AS { summarizationAttribute 4 };
bufferedObservationIdList ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.BufferedObservationIdList;
BEHAVIOUR
bufferedObservationIdListBehaviour BEHAVIOUR
DEFINED AS
"This attribute identifies observed objects, and observed attributes
within those managed objects, to be scanned. See 8.1.9.2.";;
REGISTERED AS { summarizationAttribute 5 };
bufferedObservationList ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.BufferedObservationList;
BEHAVIOUR
bufferedObservationListBehaviour BEHAVIOUR
DEFINED AS
"See 8.2.2.3.4, A.4.";;
REGISTERED AS { summarizationAttribute 6 };
endTimeOffset ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.TimePeriod;
MATCHES FOR EQUALITY;
BEHAVIOUR
endTimeOffsetBehaviour BEHAVIOUR
DEFINED AS
"The value of this attribute, subtracted from the current time,
indicates the end of a time window. See 8.1.12.5.";;
REGISTERED AS { summarizationAttribute 7 };
firstScanInitiationTime ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.FirstScanInitiationTime;
MATCHES FOR EQUALITY, ORDERING;
BEHAVIOUR
firstScanInitiationTimeBehaviour BEHAVIOUR
DEFINED AS
"This attribute indicates the start time of the first scan in buffer.
See 8.2.2.3.2.";;
REGISTERED AS { summarizationAttribute 8 };
incompleteScan ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.IncompleteScan;
MATCHES FOR EQUALITY, ORDERING;
BEHAVIOUR
incompleteScanBehaviour BEHAVIOUR
DEFINED AS
"The value of this attribute indicates the reason a scan could not be
completed. See 8.2.2.1.4.";;
REGISTERED AS { summarizationAttribute 30 };
numericAttributeIdArray ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.NumericAttributeIdArray;
MATCHES FOR EQUALITY;
BEHAVIOUR
numericAttributeIdArrayBehaviour BEHAVIOUR
DEFINED AS
"This attribute is an ordered list of identifiers of attributes whose
values are to be scanned. The identified attributes must be of either
the integer or the real type. See 8.1.9.2.";;
REGISTERED AS { summarizationAttribute 10 };
numericAttributeIdList ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.NumericAttributeIdList;
MATCHES FOR EQUALITY, SET-COMPARISON, SET-INTERSECTION;
BEHAVIOUR
numericAttributeIdListBehaviour BEHAVIOUR
DEFINED AS
"This attribute is a list of identifiers of attributes whose values are
to be scanned. The identified attributes must be of either the integer
or the real type. See 8.1.3.2.";;
REGISTERED AS { summarizationAttribute 11 };
objectList ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.ObjectList;
MATCHES FOR EQUALITY, SET-COMPARISON, SET-INTERSECTION;
BEHAVIOUR
objectListBehaviour BEHAVIOUR
DEFINED AS
"This attribute identifies the managed objects whose attributes are to
be scanned.";;
REGISTERED AS { summarizationAttribute 12 };
observationIdList ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.ObservationIdList;
BEHAVIOUR
observationIdListBehaviour BEHAVIOUR
DEFINED AS
"This attribute identifies observed objects, and observed attributes
within those managed objects, to be scanned.";;
REGISTERED AS { summarizationAttribute 13 };
observationReportList ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.NonStatisticalReportInformation;
BEHAVIOUR
observationReportListBehaviour BEHAVIOUR
DEFINED AS
"This attribute specifies the set of managed objects and their
attributes values that were scanned. See 8.2.2.2.2.";;
REGISTERED AS { summarizationAttribute 14 };
observationScanList ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.ObservationScanList;
BEHAVIOUR
observationScanListBehaviour BEHAVIOUR
DEFINED AS
"This attribute specifies the set of managed objects and their
attributes values that were scanned. See 8.2.2.1.3.";;
REGISTERED AS { summarizationAttribute 15 };
onceReportAttributeIdList ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.OnceReportAttributeIdList;
MATCHES FOR EQUALITY, SET-INTERSECTION, SET-COMPARISON;
BEHAVIOUR
onceReportAttributeIdListBehaviour BEHAVIOUR
DEFINED AS
"See 8.1.12.2.";;
REGISTERED AS { summarizationAttribute 16 };
onceReportAttributeList ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.OnceReportAttributeList;
MATCHES FOR EQUALITY, SET-INTERSECTION, SET-COMPARISON;
BEHAVIOUR
onceReportAttributeListBehaviour BEHAVIOUR
DEFINED AS
"See 8.2.2.1.2.";;
REGISTERED AS { summarizationAttribute 17 };
reportPeriod ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.ReportPeriod;
MATCHES FOR EQUALITY, ORDERING ;
BEHAVIOUR
reportPeriodBehaviour BEHAVIOUR
DEFINED AS
"This attribute indicates the number of granularity periods in a report
period. See 8.1.9.2.";;
REGISTERED AS { summarizationAttribute 19 };
scanAttributeIdList ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.ScanAttributeIdList;
MATCHES FOR EQUALITY, SET-COMPARISON, SET-INTERSECTION;
BEHAVIOUR
scanAttributeIdListBehaviour BEHAVIOUR
DEFINED AS
"This attribute identifies attributes of any ASN.1 type whose attribute
identifiers are to be included in summary reports along with the
attribute values. See 8.1.9.2.";;
REGISTERED AS { summarizationAttribute 21 };
scanInitiationTime ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.ScanInitiationTime;
MATCHES FOR EQUALITY, ORDERING;
BEHAVIOUR
scanInitiationTimeBehaviour BEHAVIOUR
DEFINED AS
"See 8.2.2.1.1.";;
REGISTERED AS { summarizationAttribute 22 };
scanningFilter ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.CMISFilter;
BEHAVIOUR
scanningFilterBehaviour BEHAVIOUR
DEFINED AS
"This attribute identifies a set of criteria for selecting managed
objects, used in the filtering process. See 8.1.12.3";;
REGISTERED AS { summarizationAttribute 24 };
scope ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.Scope;
MATCHES FOR EQUALITY ;
BEHAVIOUR
scopeBehaviour BEHAVIOUR
DEFINED AS
"This attribute identifies a set of managed objects, used in the scoping
process for selecting managed objects. See 8.1.12.3.";;
REGISTERED AS { summarizationAttribute 25 };
suppressObjectInstance ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.SuppressObjectInstance;
MATCHES FOR EQUALITY;
BEHAVIOUR
suppressObjectInstanceBehaviour BEHAVIOUR
DEFINED AS
"This attribute identifies a boolean value which, if true, causes the
observed object instance parameter to be suppressed from all summary
reports. See 8.1.9.2.";;
REGISTERED AS { summarizationAttribute 26 };
suspectIntervals ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.SuspectIntervals;
MATCHES FOR EQUALITY, ORDERING;
BEHAVIOUR
suspectIntervalsBehaviour BEHAVIOUR
DEFINED AS
"See 8.2.2.3.3.";;
REGISTERED AS { summarizationAttribute 27 };
timeAttributeIdentifier ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.TimeAttributeIdentifier;
MATCHES FOR EQUALITY;
BEHAVIOUR
timeAttributeIdBehaviour BEHAVIOUR
DEFINED AS
"This attribute identifies which attribute within an observed managed
object is used for time-based selection. See 8.1.12.5.";;
REGISTERED AS { summarizationAttribute 28 };
timeStampReportMode ATTRIBUTE
WITH ATTRIBUTE SYNTAX SummarizationASN1Productions.TimeStampReportMode;
MATCHES FOR EQUALITY, ORDERING;
BEHAVIOUR
timeStampReportModeBehaviour BEHAVIOUR
DEFINED AS
"The value of this attribute identifies which method of time stamping
reports should be used: timeStampingOff (0), globalTimeStampOnly (1), or
individualTimeStamping (2). See 8.1.12.4.";;
REGISTERED AS { summarizationAttribute 29 };
bufferedScanReport NOTIFICATION
BEHAVIOUR
bufferedScanReportBehaviour BEHAVIOUR
DEFINED AS
"This notification is emitted upon completion of the last scan in the
report period, and includes attribute values scanned within the report
period which has just completed.";;
WITH INFORMATION SYNTAX SummarizationASN1Productions.BufferedScanReportInformation
AND ATTRIBUTE IDS
granularityPeriod
"ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11:1994":granularityPeriod,
firstScanInitiationTime firstScanInitiationTime,
suspectIntervals suspectIntervals,
bufferedObservationList bufferedObservationList,
incompleteScan incompleteScan,
additionalText "CCITT Rec. X.721 (1992) | ISO/IEC 10165-2:1992":additionalText,
additionalInformation
"CCITT Rec. X.721 | ISO/IEC 10165-2:1992":additionalInformation;
REGISTERED AS { summarizationNotification 1 };
scanReport NOTIFICATION
BEHAVIOUR
scanReportBehaviour BEHAVIOUR
DEFINED AS
"This notification is emitted upon completion of a scan, and includes
attribute values observed during the scan.";;
WITH INFORMATION SYNTAX SummarizationASN1Productions.ScanReportInformation
AND ATTRIBUTE IDS
scanInitiationTime scanInitiationTime,
onceReportAttributeList onceReportAttributeList,
observationScanList observationScanList,
incompleteScan incompleteScan,
additionalText "CCITT Rec. X.721 (1992) | ISO/IEC 10165-2:1992":additionalText,
additionalInformation
"CCITT Rec. X.721 | ISO/IEC 10165-2:1992":additionalInformation;
REGISTERED AS { summarizationNotification 2 };
statisticalReport NOTIFICATION
BEHAVIOUR
statisticalReportBehaviour BEHAVIOUR
DEFINED AS
"This notification is emitted upon completion of a scan, and includes
statistical summary information.";;
WITH INFORMATION SYNTAX SummarizationASN1Productions.StatisticalScanReportInformation
AND ATTRIBUTE IDS
scanInitiationTime scanInitiationTime,
observationReportList observationReportList,
algorithmOutputs algorithmOutputs,
algorithmParameters algorithmParameters,
incompleteScan incompleteScan,
additionalText "CCITT Rec. X.721 (1992) | ISO/IEC 10165-2:1992":additionalText,
additionalInformation
"CCITT Rec. X.721 | ISO/IEC 10165-2:1992":additionalInformation;
REGISTERED AS { summarizationNotification 3 };
activateDynamicSimpleScanReport ACTION
BEHAVIOUR
activateDynamicSimpleScanReportBehaviour BEHAVIOUR
DEFINED AS
"The contents of SummarizationASN1Productions.ScanReportInformation may
be sent in multiple replies. See 8.3";;
MODE CONFIRMED;
WITH INFORMATION SYNTAX SummarizationASN1Productions.DynamicSimpleScanArgument;
WITH REPLY SYNTAX SummarizationASN1Productions.ScanReportInformation;
REGISTERED AS { summarizationAction 1 };
activateScanReport ACTION
BEHAVIOUR
activateScanReportBehaviour BEHAVIOUR
DEFINED AS
"This action initiates a scan according to the current object and
attribute selection attributes of the scanner. The reply includes all
scanned attribute values. The contents of
SummarizationASN1Productions.ScanReportInformation may be sent in
multiple replies.";;
MODE CONFIRMED;
WITH REPLY SYNTAX SummarizationASN1Productions.ScanReportInformation;
REGISTERED AS { summarizationAction 2 };
activateStatisticalReport ACTION
BEHAVIOUR
activateStatisticalReportBehaviour BEHAVIOUR
DEFINED AS
"This action initiates a scan according to the current object and
attribute selection attributes of the scanner. The reply includes
scanned attribute values and/or statistical summary information
calculated from those values. The contents of
SummarizationASN1Productions.StatisticalScanReportInformation may be
sent in multiple replies.";;
MODE CONFIRMED;
WITH REPLY SYNTAX SummarizationASN1Productions.StatisticalScanReportInformation;
REGISTERED AS { summarizationAction 3 };
reportBuffer ACTION
BEHAVIOUR
reportBufferBehaviour BEHAVIOUR
DEFINED AS
"The report buffer action initiates a scan of the attributes specified
in the report time attribute Id list. The retained values of the
previously scanned attributes together with the results of this scan are
returned in the action result. The contents of
SummarizationASN1Productions.BufferedScanReportInformation may be sent
in multiple replies. See 8.1.9.3.";;
MODE CONFIRMED;
WITH REPLY SYNTAX SummarizationASN1Productions.BufferedScanReportInformation;
REGISTERED AS { summarizationAction 4 };
dynamicSimpleScanner-system NAME BINDING
SUBORDINATE OBJECT CLASS dynamicSimpleScanner AND SUBCLASSES;
NAMED BY
SUPERIOR OBJECT CLASS "CCITT Rec. X.721 (1992) | ISO/IEC 10165-2:1992":system
AND SUBCLASSES;
WITH ATTRIBUTE "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11:1994":scannerId;
CREATE
WITH-REFERENCE-OBJECT,
WITH-AUTOMATIC-INSTANCE-NAMING conflictingPackagesRequestedError;
DELETE
ONLY-IF-NO-CONTAINED-OBJECTS;
REGISTERED AS { summarizationNameBinding 2 };
conflictingPackagesScanner-system NAME BINDING
SUBORDINATE OBJECT CLASS "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11:1994":scanner
AND SUBCLASSES;
NAMED BY
SUPERIOR OBJECT CLASS "CCITT Rec. X.721 (1992) | ISO/IEC 10165-2:1992":system
AND SUBCLASSES;
WITH ATTRIBUTE "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11:1994":scannerId;
CREATE
WITH-REFERENCE-OBJECT,
WITH-AUTOMATIC-INSTANCE-NAMING conflictingPackagesRequestedError;
DELETE
ONLY-IF-NO-CONTAINED-OBJECTS;
REGISTERED AS { summarizationNameBinding 9 };
conflictingPackagesRequestedError PARAMETER
CONTEXT SPECIFIC-ERROR;
WITH SYNTAX SummarizationASN1Productions.PackageConflict;
BEHAVIOUR
conflictingPackagesRequestedErrorBehaviour BEHAVIOUR
DEFINED AS
"This error is returned when an object creation is requested either with
attributes defined for conditional packages all of which shall not be
present together or attributes of packages that have to be present
together but are not specified in the request.";;
REGISTERED AS { summarizationParameter 2 };
scanActionError PARAMETER
CONTEXT SPECIFIC-ERROR;
WITH SYNTAX SummarizationASN1Productions.ScannerActionError;
BEHAVIOUR
scannerActionErrorBehaviour BEHAVIOUR
DEFINED AS
"The scan action request to a summarization managed object was not
performed because of one of the following reasons: administrative state
is locked, administrative state is shutting down, scan is terminated
because administrative state was set to locked when performing the scan
action or an unspecified error occurred.";;
REGISTERED AS { summarizationParameter 1 };
--<GDMO.EndDocument>--
-- =============================================================================
-- Formatted by OpenT2 Version 5.5.6.34 on Fri Aug 20 11:20:49 2004