-- =============================================================================
-- GDMO definitions extracted from ITU-T Rec. Q.751.1 (1995)
-- =============================================================================
lsTimersProfile MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":top;
CHARACTERIZED BY lsTimersProfilePackage PACKAGE
BEHAVIOUR lsTimersProfileBehaviour BEHAVIOUR DEFINED AS
"A signalling link set timer profile is a set of Q.704 timers which are
related to the characteristics of signalling links sets.
The managed object class lsTimersProfile is a support managed object class
which can be instantiated in order to define a particular profile. At
creation time of a signLinkSetTp one of the lsTimersProfiles is referenced.";;
ATTRIBUTES
lsTimersProfileId GET SET-BY-CREATE,
q704-t6 GET SET-BY-CREATE,
q704-t8 GET SET-BY-CREATE,
q704-t10 GET SET-BY-CREATE;;;
CONDITIONAL PACKAGES
"ITU-T Rec. M.3100 (1992)":createDeleteNotificationsPackage PRESENT IF "the
objectCreation and objectDeletion notifications defined in 'ITU-T Rec.
X.721 (1992) | ISO/IEC 10165-2 : 1992' are supported by an instance of
this class",
"ITU-T Rec. M.3100 (1992)":attributeValueChangeNotificationPackage PRESENT
IF "the attributeValueChangeNotification defined in 'ITU-T Rec. X.721
(1992) | ISO/IEC 10165-2 : 1992' is supported by an instance of this class",
lsTimersProfileNamePackage PRESENT IF "an instance supports it";
REGISTERED AS { mtpObjectClass 1 };
managedSwitchingElement MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. M.3100 (1992)":managedElement;
CHARACTERIZED BY managedSwitchingElementPackage PACKAGE
BEHAVIOUR managedSwitchingElementBehaviour BEHAVIOUR DEFINED AS
"The Managed Switching Element represents, for management purposes, an
exchange, i.e. the aggregate of traffic carrying devices, switching
stages, controlling and signalling means at a network node that enables
subscriber lines to be interconnected and packets to be forwarded as
required by individual users.";;
ATTRIBUTES
"ITU-T Rec. M.3100 (1992)": vendorName GET SET-BY-CREATE;;;
CONDITIONAL PACKAGES
managedSwitchingElementNamePackage PRESENT IF "an instance supports it";
REGISTERED AS { mtpObjectClass 2 };
mtpAccessPoint MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. X.283 (1993) | ISO/IEC 10733 : 1992":nSAP;
CHARACTERIZED BY mtpAccessPointPkg PACKAGE
BEHAVIOUR mtpAccessPointBehaviour BEHAVIOUR DEFINED AS
"The sap2Address attribute contains the address of the mtpAccessPoint. It
contains the Signalling Point Code (SPC), Service Indicator (SI) and MTP
Network Identity (NI). The sapId attribute is used in naming instances of
the mtpAccessPoint managed object class.
The userEntityNames attribute contains the distinguished names of the
managed objects that represent the user entities that are using the
mtpAccessPoint, e.g. the SCCP instance. The providerEntityNames attribute
contains the distinguished names of the managed objects that represent the
provider entities that are supporting the mtpAccessPoint, i.e., the
instance of the MTP.
A mtpAccessPoint can have the MTP status:
- allowed, this means that the mtpAccessPoint is accessible and is
functioning normally
- congested, this means that the mtpAccessPoint is accessible but the path
to it is heavily loaded
- prohibited, this means that the mtpAccessPoint not accessible.
If the ss7OnOccEventPackage is present, event notification with the
following probable causes can apply: Probable Cause = 001
(localUserPartUnavailable)";;;;
CONDITIONAL PACKAGES
"ITU-T Rec. M.3100 (1992)":alarmSeverityAssignmentPointerPackage PRESENT IF
"an instance supports it and ss7OnOccEventPackage is present",
mtpAccessPointNamePackage PRESENT IF "an instance supports it",
ss7OnOccEventPackage PRESENT IF "an instance supports it";
REGISTERED AS { mtpObjectClass 3 };
mtpL2ProtocolProfile MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":top;
CHARACTERIZED BY mtpL2ProtocolProfilePkg PACKAGE
BEHAVIOUR mtpL2ProtocolProfileBehaviour BEHAVIOUR DEFINED AS
"An MTP level 2 protocol profile is a set of Q.703 parameters which
defines the layer 2 characteristics of Signalling Links.
The managed object class mtpL2ProtocolProfile is a support managed object
class which can be instantiated in order to define a particular profile.
At creation time of a signLinkTp one of the mtpL2ProtocolProfiles is
referenced.";;
ATTRIBUTES
mtpL2ProtocolProfileId GET SET-BY-CREATE,
errorCorrectionMethod GET SET-BY-CREATE,
transmissionRate GET SET-BY-CREATE,
l2TimerT1 GET SET-BY-CREATE,
l2TimerT2 GET SET-BY-CREATE,
l2TimerT3 GET SET-BY-CREATE,
l2TimerT4N GET SET-BY-CREATE,
l2TimerT4E GET SET-BY-CREATE,
l2TimerT5 GET SET-BY-CREATE,
l2TimerT6 GET SET-BY-CREATE,
l2TimerT7 GET SET-BY-CREATE,
transmissionCongestionThresholdOnsetLevel1 GET SET-BY-CREATE,
transmissionCongestionThresholdAbatementLevel1 GET SET-BY-CREATE;;;
CONDITIONAL PACKAGES
"ITU-T Rec. M.3100 (1992)":attributeValueChangeNotificationPackage PRESENT
IF "the attributeValueChangeNotification defined in 'ITU-T Rec. X.721
(1992) | ISO/IEC 10165-2 : 1992' is supported by an instance of this class",
"ITU-T Rec. M.3100 (1992)":createDeleteNotificationsPackage PRESENT IF "the
objectCreation and objectDeletion notifications defined in 'ITU-T Rec.
X.721 (1992) | ISO/IEC 10165-2 : 1992' are supported by an instance of
this class",
bufferMechanismPackage PRESENT IF "an instance supports it",
congestionHandlingPackage PRESENT IF "an instance supports it",
loopDelayPackage PRESENT IF "an instance supports it",
mtpL2ProtocolProfileNamePackage PRESENT IF "an instance supports it",
multipleTransmissionCongestionLevelsPackage PRESENT IF "an instance supports it",
multipleTransmissionCongestionStatesPackage PRESENT IF "an instance supports it",
pCRPackage PRESENT IF "an instance supports it",
receiveCongestionLevelsPackage PRESENT IF "an instance supports it";
REGISTERED AS { mtpObjectClass 4 };
mtpLevel3 MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":top;
CHARACTERIZED BY mtpLevel3Package PACKAGE
BEHAVIOUR mtpLevel3Behaviour BEHAVIOUR DEFINED AS
"This managed object class models MTP Level 3 functionality.
If the 'ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 :
1992':communicationsAlarm notification is used, the following probable
causes can apply:
Probable Cause = 501 (AdjacentPCInaccessible), with the inaccessible
adjacent pointcode as a parameter, which represents measurement Q.752/5.1
(PerceivedSeverity=Maj/Min/War) and measurement Q.752/5.4
(PerceivedSeverity=Cleared).
-- Modelling of Measurements Q.752/5.1 and 5.4 is for further study
If the ss7OnOccEventPackage is included, event notifications with the
following probable causes can apply:
Probable Cause = 405 (LinkSetFailure), with the inaccessible adjacent
pointcode as a parameter, which represents measurement Q.752/4.5
(PerceivedSeverity=Maj/Min/War) and measurement Q.752/4.6
(PerceivedSeverity=Cleared).
-- Modelling of Measurements Q.752/4.5 and 4.6 is for further study
Probable Cause = 413 (LinkSetChange), with the involved link sets as
parameter, which represents measurement Q.752/4.13. ";;
ATTRIBUTES
mtpLevel3Id GET SET-BY-CREATE,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":administrativeState
GET-REPLACE,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":operationalState GET,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":usageState GET,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":proceduralStatus GET;
NOTIFICATIONS
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":stateChange;;;
CONDITIONAL PACKAGES
"ITU-T Rec. M.3100 (1992)":alarmSeverityAssignmentPointerPackage PRESENT IF
"an instance supports it and the (communicationsAlarmPackage or
ss7OnOccEventPackage) is present",
"ITU-T Rec. M.3100 (1992)":attributeValueChangeNotificationPackage PRESENT
IF "the attributeValueChangeNotification defined in 'ITU-T Rec. X.721
(1992) | ISO/IEC 10165-2 : 1992' is supported by an instance of this class",
"ITU-T Rec. M.3100 (1992)":createDeleteNotificationsPackage PRESENT IF "the
objectCreation and objectDeletion notifications defined in 'ITU-T Rec.
X.721 (1992) | ISO/IEC 10165-2 : 1992' are supported by an instance of
this class",
communicationsAlarmPackage PRESENT IF "an instance supports it",
mtpLevel3NamePackage PRESENT IF "an instance supports it",
ss7OnOccEventPackage PRESENT IF "an instance supports it";
REGISTERED AS { mtpObjectClass 5 };
mtpSignPoint MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":top;
CHARACTERIZED BY mtpSignPointPackage PACKAGE
BEHAVIOUR mtpSignPointBehaviour BEHAVIOUR DEFINED AS
"A signalling point is a node in the signalling network. It is part of a
managed switching element (exchange). The MTP permits three types of node:
- SEP: the signalling end point, this type of SP contains MTP and ISUP
(and or other MTP Users), but cannot act as an intermediate MTP transfer
node in the SS No.7 network. (It can act as an SCCP Relay Node.)
- STP: the MTP signalling transfer point, this type of SP acts as an
intermediate node between SEPs to transfer messages through the SS
No.7-network, it only contains MTP. (In case of an STP, OMAP, and hence
also TC and SCCP may be present.)
- STEP: MTP signalling transfer and end point, the type combines the
previous mentioned types, thus acting both as a SEP and as a STP.
A mtpSignPoint can have the MTP status:
- allowed, this means that the mtpSignPoint is accessible and is
functioning normally (operational state = enabled, availability status = ()
- congested, this means that the mtpSignPoint is accessible but is heavily
loaded (operational state = enabled, availability status = { degraded })
- prohibited, this means that the mtpSignPoint not accessible (operational
state = disabled).
During MTP restart, the proceduralStatus is {initializing} until the
restart is finished.";;
ATTRIBUTES
mtpSignPointId GET SET-BY-CREATE,
pointCode GET SET-BY-CREATE,
spType GET SET-BY-CREATE,
-- In some implementations the spType attribute might additionally be writable.
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":operationalState GET,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":proceduralStatus GET,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":availabilityStatus GET,
"ITU-T Rec. M.3100 (1992)":version GET SET-BY-CREATE,
networkIndicator GET SET-BY-CREATE;
NOTIFICATIONS
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":stateChange,
mtpRestarting;;;
CONDITIONAL PACKAGES
"ITU-T Rec. M.3100 (1992)":attributeValueChangeNotificationPackage PRESENT
IF "the attributeValueChangeNotification defined in 'ITU-T Rec. X.721
(1992) | ISO/IEC 10165-2 : 1992' is supported by an instance of this class",
"ITU-T Rec. M.3100 (1992)":createDeleteNotificationsPackage PRESENT IF "the
objectCreation and objectDeletion notifications defined in 'ITU-T Rec.
X.721 (1992) | ISO/IEC 10165-2 : 1992' are supported by an instance of
this class",
mtpSignPointNamePackage PRESENT IF "an instance supports it",
spTimersPackage PRESENT IF "the instance does not support the
spTimersProfilePointerPackage",
spTimersProfilePointerPackage PRESENT IF "the instance does not support the
spTimersPackage";
REGISTERED AS { mtpObjectClass 6 };
signDataLinkTp MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":top;
CHARACTERIZED BY signDataLinkTpPackage PACKAGE
BEHAVIOUR signDataLinkTpBehaviour BEHAVIOUR DEFINED AS
"This managed object represents the termination of the signalling data
link within the SP as defined in Q.702.
The operational state is 'enabled' in normal operation. In case of failure
of the part of the signalling data link that is within control of the
managed switching element, this state will be 'disabled'.";;
-- Note that for a complete view of the status of a signalling data link a
-- network view is required.
ATTRIBUTES
signDataLinkTpId GET SET-BY-CREATE,
adjPc GET SET-BY-CREATE,
transmissionRate GET SET-BY-CREATE,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":operationalState GET,
equipmentPointer GET SET-BY-CREATE;
NOTIFICATIONS
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":stateChange;;;
CONDITIONAL PACKAGES
"ITU-T Rec. M.3100 (1992)":attributeValueChangeNotificationPackage PRESENT
IF "the attributeValueChangeNotification defined in 'ITU-T Rec. X.721
(1992) | ISO/IEC 10165-2 : 1992' is supported by an instance of this class",
"ITU-T Rec. M.3100 (1992)":createDeleteNotificationsPackage PRESENT IF "the
objectCreation and objectDeletion notifications defined in 'ITU-T Rec.
X.721 (1992) | ISO/IEC 10165-2 : 1992' are supported by an instance of
this class",
cICPackage PRESENT IF "an instance supports it",
signDataLinkTpNamePackage PRESENT IF "an instance supports it",
stmChannelPackage PRESENT IF "an instance supports it or the signalling
point supports the automatic allocation of signalling datalinks";
REGISTERED AS { mtpObjectClass 7 };
-- An example of the OSI state mapping for this class can be found in Annex C.
signLinkSetTp MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":top;
CHARACTERIZED BY signLinkSetTpPackage PACKAGE
BEHAVIOUR signLinkSetTpBehaviour BEHAVIOUR DEFINED AS
"This managed object class represents the SS No. 7 signalling link set
termination point. Link sets are defined in Recommendation Q.704.
The states are directly related to the set of link termination point's
states, except for the optional administrativeState.
General principles on state information:
- The states of the managed object linkset are only readable, except for
the optional administrativeState.
- Activation and deactivation of a linkset may be done via operations on
the links (e.g. by using scoping functions) or the optional
administrativeState can be used for this.
Based on these principles the states of a linkset are defined as follows:
- operational state (read-only for the OS). The operational state is
enabled whenever one link of the linkset is enabled, i.e. neither FAILED
nor DEACTIVATED nor LOCAL BLOCKED nor REMOTE BLOCKED.
- usage state (read-only for the OS). The usage state reflects the usage
of the belonging links. It is ACTIVE if at least one of the belonging
links is ACTIVE and no link is BUSY. It contains BUSY if one of the
belonging links is BUSY. It is IDLE if all links are UNAVAILABLE.
- availability status (read-only for the OS). The availability status
indicates unavailability or reduced availability of the belonging links.
It contains DEPENDENCY if all the belonging links are unavailable for
user traffic. It contains DEGRADED if at least one belonging link is not
available for user traffic.
For the different reasons of unavailability (failed, deactivated, local
blocked, remote blocked, local inhibited and remote inhibited) see 3.2.1/Q.704.
If the 'ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 :
1992':communicationsAlarm notification is used, the following probable
causes can apply:
Probable Cause=403 (LinkSetFailure), which represents measurements
Q.752/4.3 (PerceivedSeverity=Maj/Min/War) and Q.752/4.4
(PerceivedSeverity=Cleared).
State change notifications are emitted for all state and status changes. ";;
ATTRIBUTES
signLinkSetTpId GET SET-BY-CREATE,
adjPc GET SET-BY-CREATE,
maxCapacityLS GET SET-BY-CREATE,
-- In some implementations, the maxCapacityLS attribute might be
-- additionally writable.
currentCapacityLS GET,
congestionControlMethod GET SET-BY-CREATE,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":usageState GET,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":operationalState GET,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":availabilityStatus GET,
periodicLinkTestFlag
DEFAULT VALUE MTPDefinedTypesModule.periodicTestFlagDefault GET-REPLACE;
NOTIFICATIONS
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":stateChange;;;
CONDITIONAL PACKAGES
administrativeStatePackage PRESENT IF "an instance supports it",
"ITU-T Rec. M.3100 (1992)":alarmSeverityAssignmentPointerPackage PRESENT IF
"an instance supports it and the communicationsAlarmPackage is present",
"ITU-T Rec. M.3100 (1992)":attributeValueChangeNotificationPackage PRESENT
IF "the attributeValueChangeNotification defined in 'ITU-T Rec. X.721
(1992) | ISO/IEC 10165-2 : 1992' is supported by an instance of this class",
"ITU-T Rec. M.3100 (1992)":createDeleteNotificationsPackage PRESENT IF "the
objectCreation and objectDeletion notifications defined in 'ITU-T Rec.
X.721 (1992) | ISO/IEC 10165-2 : 1992' are supported by an instance of
this class",
communicationsAlarmPackage PRESENT IF "an instance supports it",
inLsLoadShareAlgorithmPackage PRESENT IF "an instance supports it",
lsTimersProfilePointerPackage PRESENT IF "the instance of superior class
mtpSignPoint does not support the conditional spTimersPackage",
noBasicLinkAllocationPackage PRESENT IF "Basic link allocation is not done",
signLinkSetTpNamePackage PRESENT IF "an instance supports it";
REGISTERED AS { mtpObjectClass 8 };
-- An example of mapping of the MTP functional states to the incorporated OSI
-- management states can be found in Annex C.
signLinkTp MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":top;
CHARACTERIZED BY signLinkTpPackage PACKAGE
BEHAVIOUR signLinkTpBehaviour BEHAVIOUR DEFINED AS
"This managed object represents the termination of the signalling link
within the signalling point as defined in Recommendation Q.703. The
signLinkTp object class represents that part of a signalling link which is
located in one NE.
The following state and status attributes are supported: administrative state:
- locked: it is administratively not permitted to transport traffic on the
link termination point.
- unlocked: it is administratively permitted to transport user part
traffic or test traffic on the link termination point.
operational state:
- enabled: the link termination point is operationally able to transport
user part traffic or test traffic.
- disabled: the link termination point is operationally unable to
transport user part traffic or test traffic.
The operational state is disabled whenever the link termination point
status contains Failed, Deactivated, Local Blocked, Remote Blocked, or the
procedural status is Initializing.
usage state:
- idle: the link termination point carries no user part traffic (test
traffic may be present).
- 'active': the link termination point is not congested. Currently the
link termination point carries user part traffic.
- busy: the link termination point is congested due to user part traffic.
The usage state is idle whenever the link termination point status is not
empty i.e. the usage state immediately reflects the availability of the
signLinkTp for user traffic. For national MTP options applying several
congestion levels an additional attribute indicating these levels may be added.
procedural status:
- The procedural status initializing is valid during initial alignment procedure.
- The procedural status not initalized applies when the link termination
point is not aligned and the initial alignment procedure has not been started.
Link termination point status. This is a set-valued attribute. The
following statusses can exist alone or in combinations with each other.
The exact definition for each of the following SS7-functional states is to
be gained from Q.704
- local blocked
- remote blocked
- local inhibited
- remote inhibited
- failed
- deactivated.
If the 'ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 :
1992':communicationsAlarm notification is used, the following probable
causes can apply:
Probable Cause = 102 (slFailure) which represents measurement Q.752/1.2 -
measurement Q.752/1.6 (SpecificProblems=003 abnormalFIBRorBSNR, 004
excessiveAckDelay, 005 excessiveErrorRate, 006 excessiveCongDuration) and
Q.752/1.12.(PerceivedSeverity=cleared)
If the ss7OnOccEventPackage is present, the event notifications with the
following probable causes can apply:
Probable Cause = 110 (localChangeOver) which represents measurement
Q.752/1.10 (PerceivedSeverity=Maj/Min/War) and measurement Q.752/1.11
(PerceivedSeverity=Cleared). Probable Cause = 210 (remoteProcOutage) which
represents measurements Q.752/2.10 (PerceivedSeverity=Maj/Min/War) and
Q.752/2.11 (PerceivedSeverity=Cleared). Probable Cause = 216 (start of
local inhibition) which represents measurement Q.752/2.16
(PerceivedSeverity=Maj/Min/War) and Q.752/2.17
(PerceivedSeverity=Cleared). Probable Cause = 218 (start of remote
inhibition) which represents measurement Q.752/2.18
(PerceivedSeverity=Maj/Min/War) and Q.752/2.19 (PerceivedSeverity=Cleared).
A create or set request is rejected, if
i) a pointer would reference an instance, which does not belong to the
appropriate object class
OR ii) a pointer would reference an instance which is not existing OR iii)
a signDataLinkTpPointer would reference a signDataLinkTp which is not in
the same mtpSignPoint
OR iv) a signDataLinkTpPointer would reference a signDataLinkTp which has
a different value of adjPc than the superior signLinkSetTp
OR v) the link would reference a datalink and a mtpL2ProtocolProfile whose
transmissionRates is not the same
OR vi) the link would reference a mtpL2ProtocolProfile where the
appropriate packages for the congestionControlMethod of the superior
signLinkSetTp are not present (see B.1.2.9.2)
OR vii) the spTimersProfilePackage is present in the superior mtpSignPoint
AND the link would reference a mtpL2ProtocolProfile whose l2TimerT2 is not
bigger than the q704-t17 of the spTimersProfile referenced by the mtpSignPoint
OR viii) the spTimersPackage is present in the superior mtpSignPoint AND
the link would reference a mtpL2ProtocolProfile whose l2TimerT2 is not
bigger than the q704-t17 of the mtpSignPoint.
The rejection also takes place if only a single pointer within the
signDataLinkList or the signTermList (if present) is wrong.
A delete request is rejected, if the linkTpStatus does not contain the
value deactivated.
A create request or a set request for the attribute protocolProfilePointer
is rejected, if
i) a signLinkTp instance whose superior signLinkSetTp has a value of its
attribute congestionControlMethod 'ccmQ704NationalWithPrio' would not
reference a mtpL2ProtocolProfile instance which is supporting either
the multipleTransmissionCongestionStatesPackage or the
multipleTransmissionCongestionLevelsPackage
OR ii) a signLinkTp instance whose superior signLinkSetTp has a value of
its attribute congestionControlMethod
'ccmQ704NationalNoPrioBufferMechanism' would not reference a
mtpL2ProtocolProfile instance which is supporting the
multipleTransmissionCongestionLevelsPackage
OR iii) a signLinkTp instance whose superior signLinkSetTp has a value of
its attribute congestionControlMethod
'ccmQ704NationalNoPrioTimerMechanism' would not reference a
mtpL2ProtocolProfile instance which is supporting the
multipleTransmissionCongestionStatesPackage.";;
ATTRIBUTES
slCode GET SET-BY-CREATE,
slsCodeCurrentList GET,
maxCapacitySL GET SET-BY-CREATE,
currentCapacitySL GET,
linkTpStatus GET,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":administrativeState
GET-REPLACE,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":operationalState GET,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":usageState GET,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":proceduralStatus GET,
protocolProfilePointer GET-REPLACE,
signTermPointer GET SET-BY-CREATE,
signDataLinkTpPointer GET-REPLACE;
ACTIONS
localInhibit,
localUninhibit;
NOTIFICATIONS
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":stateChange;;;
CONDITIONAL PACKAGES
"ITU-T Rec. M.3100 (1992)":alarmSeverityAssignmentPointerPackage PRESENT IF
"an instance supports it and the (communicationsAlarmPackage or
ss7OnOccEventPackage) is present",
"ITU-T Rec. M.3100 (1992)":attributeValueChangeNotificationPackage PRESENT
IF "the attributeValueChangeNotification defined in 'ITU-T Rec. X.721
(1992) | ISO/IEC 10165-2 : 1992' is supported by an instance of this class",
"ITU-T Rec. M.3100 (1992)":createDeleteNotificationsPackage PRESENT IF "the
objectCreation and objectDeletion notifications defined in 'ITU-T Rec.
X.721 (1992) | ISO/IEC 10165-2 : 1992' are supported by an instance of
this class",
communicationsAlarmPackage PRESENT IF "an instance supports it",
linkCongestionLevelPackage PRESENT IF "the exchange support the operation,
management and administration of multiple transmission congestion levels
(national option)",
relatedLinkGroupNumberPackage PRESENT IF "an instance supports it",
signDataLinkTpListPackage PRESENT IF "an instance supports it",
signLinkTestPackage PRESENT IF "the on-demand signalling link test as
described in Q.707 is supported",
signLinkTpNamePackage PRESENT IF "an instance supports it",
signTermListPackage PRESENT IF "an instance supports it or an instance
supports the signDataLinkTpListPackage",
slsCodeNormalListPackage PRESENT IF "an instance supports it",
slTimersProfilePointerPackage PRESENT IF "the instance of superior class
mtpSignPoint does not support the conditional spTimersPackage",
ss7OnOccEventPackage PRESENT IF "an instance supports it";
REGISTERED AS { mtpObjectClass 9 };
slTimersProfile MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":top;
CHARACTERIZED BY
slTimersProfilePackage PACKAGE
BEHAVIOUR slTimersProfileBehaviour BEHAVIOUR DEFINED AS
"A signalling link timer profile is a set of Q.704 timers which are
related to the characteristics of Signalling Links.
The managed object class slTimersProfile is a support managed object
class which can be instantiated in order to define a particular profile.
At creation time of a signLinkTp one of the slTimersProfiles may be
referenced..";;
ATTRIBUTES
slTimersProfileId GET SET-BY-CREATE,
q704-t1 GET SET-BY-CREATE,
q704-t3 GET SET-BY-CREATE,
q704-t17 GET SET-BY-CREATE,
q704-t24 GET SET-BY-CREATE;;;
CONDITIONAL PACKAGES
"ITU-T Rec. M.3100 (1992)":createDeleteNotificationsPackage PRESENT IF "the
objectCreation and objectDeletion notifications defined in 'ITU-T Rec.
X.721 (1992) | ISO/IEC 10165-2 : 1992' are supported by an instance of
this class",
"ITU-T Rec. M.3100 (1992)":attributeValueChangeNotificationPackage PRESENT
IF "the attributeValueChangeNotification defined in 'ITU-T Rec. X.721
(1992) | ISO/IEC 10165-2 : 1992' is supported by an instance of this class",
slTimersProfileNamePackage PRESENT IF "an instance supports it";
REGISTERED AS { mtpObjectClass 10 };
spTimersProfile MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":top;
CHARACTERIZED BY
spTimersProfilePackage PACKAGE
BEHAVIOUR spTimersProfileBehaviour BEHAVIOUR DEFINED AS
"A signalling link set timer profile is set of Q.704 and Q.707 timers
which are related to the characteristics of signalling points.
The managed object class spTimersProfile is a support managed object
class which can be instantiated in order to define a particular profile.
At creation time of a signPoint one of the spTimersProfiles is referenced.";;
ATTRIBUTES
spTimersProfileId GET SET-BY-CREATE,
q704-t2 GET SET-BY-CREATE,
q704-t4 GET SET-BY-CREATE,
q704-t5 GET SET-BY-CREATE,
q704-t7 GET SET-BY-CREATE,
q704-t11 GET SET-BY-CREATE,
q704-t12 GET SET-BY-CREATE,
q704-t13 GET SET-BY-CREATE,
q704-t14 GET SET-BY-CREATE,
q704-t15 GET SET-BY-CREATE,
q704-t16 GET SET-BY-CREATE,
q704-t18 GET SET-BY-CREATE,
q704-t19 GET SET-BY-CREATE,
q704-t20 GET SET-BY-CREATE,
q704-t21 GET SET-BY-CREATE,
q704-t22 GET SET-BY-CREATE,
q704-t23 GET SET-BY-CREATE,
q707-t1 GET SET-BY-CREATE,
q707-t2 GET SET-BY-CREATE;;;
CONDITIONAL PACKAGES
"ITU-T Rec. M.3100 (1992)":createDeleteNotificationsPackage PRESENT IF "the
objectCreation and objectDeletion notifications defined in 'ITU-T Rec.
X.721 (1992) | ISO/IEC 10165-2 : 1992' are supported by an instance of
this class",
"ITU-T Rec. M.3100 (1992)":attributeValueChangeNotificationPackage PRESENT
IF "the attributeValueChangeNotification defined in 'ITU-T Rec. X.721
(1992) | ISO/IEC 10165-2 : 1992' is supported by an instance of this class",
spTimersProfileNamePackage PRESENT IF "an instance supports it";
REGISTERED AS { mtpObjectClass 11 };
signRouteNePart MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":top;
CHARACTERIZED BY signRouteNePartPackage PACKAGE
BEHAVIOUR signRouteNePartBehaviour BEHAVIOUR DEFINED AS
"A signalling route (A,C,B)i is defined as an ordered sequence of the near
end signalling point A (i.e. the network element), an adjacent SP C and
the destination SP B. The adjacent SP C may be identical with the
destination B, or it may or may not be directly interconnected to the
destination SP.
The adjacent SP C must be directly connected to the near end SP by at
least one linkset which is intended to convey MSUs sent from A to B (hence
the use of the term 'adjacent').
Two signalling routes (A,C,B)i and (A,C',B)j are distinct if the adjacent
SP is different.
The signRouteNePart Managed Object class defines the management
capabilities of the resources which define a specific route segment (Link
Set to be traversed) and its priority within the routeset as seen from the own SP.
A particular signRouteNePart is related to one or more Signalling Routes
on the network level.
The priority in which the network Signalling Routes are used, is defined
by means of assigning priorities to all involved route segments. If from a
particular SP two or more route segments are used with the same priority,
loadsharing between Signalling Routes may occur. A Combined Link Set is a
set of Link Sets used with the same priority by message routing.
The signLinkSetTp used for routing is allocated at creation time and
cannot be changed during the existence of a particular signRouteNePart.
The administrativeState attribute describes whether it is administratively
permitted to route messages towards the respective destination point via
the referenced signLinkSetTp.
The operationalState attribute is 'enabled' if both the referenced
signLinkSetTp is in the operational state 'enabled' and no TFP message
concerning the respective destinations has been received from the adjPC of
the respective signLinkSetTp.
The optional usageState attribute is used to cover restriction of a route.
Its value is set to 'busy', if the route is restricted ('transfer
restricted' is a national option).
The availabilityStatus attribute gives additional information about the
availability of the signRouteNePart instance. It is furthermore needed to
map some of the MTP functional states (prohibited: availabilityStatus =
{dependency}, restricted: availabilityStatus={degraded}) and is used for
the case that the route is locked not by the OS, but e.g. by a local
administrator (administrativeState=unlocked and availabilityStatus={off line}).";;
ATTRIBUTES
signRouteNePartId GET SET-BY-CREATE,
signLinkSetTpPointer GET SET-BY-CREATE,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":administrativeState
GET-REPLACE,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":operationalState GET,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":availabilityStatus GET;
NOTIFICATIONS
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":stateChange;;;
CONDITIONAL PACKAGES
"ITU-T Rec. M.3100 (1992)":attributeValueChangeNotificationPackage PRESENT
IF "the attributeValueChangeNotification defined in 'ITU-T Rec. X.721
(1992) | ISO/IEC 10165-2 : 1992' is supported by an instance of this class",
"ITU-T Rec. M.3100 (1992)":createDeleteNotificationsPackage PRESENT IF "the
objectCreation and objectDeletion notifications defined in 'ITU-T Rec.
X.721 (1992) | ISO/IEC 10165-2 : 1992' are supported by an instance of
this class",
clsLoadsharingInformationPackage PRESENT IF "an instance supports it",
fixedRouteNePartPriorityPackage PRESENT IF "the instance does not use the
flexibleRouteNePartPriorityPackage",
flexibleRouteNePartPriorityPackage PRESENT IF "the instance does not use the
fixedRouteNePartPriorityPackage",
loadsharingInformationRouteNePartPackage PRESENT IF "the instance supports it",
mtpLoadsharingObjectForRouteNePartPointerPackage PRESENT IF "the instance
supports it",
signRouteNePartNamePackage PRESENT IF "an instance supports it",
slsListPackage PRESENT IF "the instance supports it",
usageStatePackage PRESENT IF "the instance supports 'transfer restricted'";
REGISTERED AS { mtpObjectClass 12 };
signRouteSetNePart MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":top;
CHARACTERIZED BY signRouteSetNePartPackage PACKAGE
BEHAVIOUR signRouteSetNePartBehaviour BEHAVIOUR DEFINED AS
"A Signalling Route Set is a complete set of routes that can be used to
carry traffic toward a specific destination signalling point.
The signRouteSetNePart Managed Object class defines the management
capabilities of the resources which represent a specific destination SP
and its accessibility as seen from the own SP. This SP may be the
originating SP of the MTP messages or an STP.
A particular signRouteSetNePart may be related to one or more Signalling
Route Sets on network level.
The administrativeState attribute describes whether it is administratively
permitted to route SS No. 7 MSUs towards the respective destination point.
Before the administrative state of a signRouteSetNePart can be set to
'unlocked', there must be at least one signRouteNePart contained within
the signRouteSetNePart.
The operationalState attribute describes whether the respective
destination signalling point is accessible - ('enabled') or not
('disabled'). If the operational states of all signRouteNePart instances
contained in the signRouteSetNePart are 'disabled', then the operational
state of the signRouteSetNePart is 'disabled', in any other case it is 'enabled'.
The usageState attribute is used to reflect route set congestion. The
value is 'busy' in case of route set congestion.
If the 'ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2:
1992':communicationsAlarm notification is present, it indicates at least
the following probable causes:
Probable Cause = 411(RouteSetUnavailable), which represents measurements
Q.752/4.11 (PerceivedSeverity=Maj/Min/War) and Q.752/4.12
(PerceivedSeverity=Cleared).
If the notification for Q.752/5.1 is supported, no notifications for
Q.752/4.11 and 4.12 should be sent out.
If the ss7OnOccEventPackage is present, event notifications with the
following probable cause can apply:
Probable Cause = 002 (remoteUserPartUnavailable), with the involved user
part as parameter. Possible values for SpecificProblems are: 007
'unknown', 008 'unequipped' and 009 'inaccessibleRemoteUser'.
An activation or deactivation of a signRouteSetNePart must lead to the
activation respectively deactivation of all contained signRouteNeParts.";;
ATTRIBUTES
signRouteSetNePartId GET SET-BY-CREATE,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":administrativeState
GET-REPLACE,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":operationalState GET;
NOTIFICATIONS
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 :
1992":stateChange;;;
CONDITIONAL PACKAGES
"ITU-T Rec. M.3100 (1992)":alarmSeverityAssignmentPointerPackage PRESENT IF
"an instance supports it and the (communicationsAlarmPackage or
ss7OnOccEventPackage) is present",
"ITU-T Rec. M.3100 (1992)":attributeValueChangeNotificationPackage PRESENT
IF "the attributeValueChangeNotification defined in 'ITU-T Rec. X.721
(1992) | ISO/IEC 10165-2 : 1992' is supported by an instance of this class",
"ITU-T Rec. M.3100 (1992)":createDeleteNotificationsPackage PRESENT IF "the
objectCreation and objectDeletion notifications defined in 'ITU-T Rec.
X.721 (1992) | ISO/IEC 10165-2 : 1992' are supported by an instance of
this class",
communicationsAlarmPackage PRESENT IF "an instance supports it",
congestedStatePackage PRESENT IF "the instance does not use the
congestionLevelPackage",
congestionLevelPackage PRESENT IF "the instance does not use the
congestedStatePackage",
loadsharingInformationRouteSetNePartPackage PRESENT IF "the instance supports it",
mtpLoadsharingObjectForRouteSetNePartPointerPackage PRESENT IF "the instance
supports it",
remoteExchangeLabelPackage PRESENT IF "the instance supports it",
signRouteSetNePartNamePackage PRESENT IF "the instance supports it",
ss7OnOccEventPackage PRESENT IF "an instance supports it";
REGISTERED AS { mtpObjectClass 13 };
signTerm MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":top;
CHARACTERIZED BY signTermPackage PACKAGE
BEHAVIOUR signTermBehaviour BEHAVIOUR DEFINED AS
"The signTerm MOC defines the management capabilities for the signalling
terminal. The signalling terminal is defined in ITU-T Rec. Q.703.";;
ATTRIBUTES
signTermId GET SET-BY-CREATE,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":administrativeState
GET-REPLACE,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":operationalState GET,
-- the application of the following state is f.f.s.
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":usageState GET,
-- the application of the following state is f.f.s.
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":proceduralStatus GET,
-- the application of the following state is f.f.s.
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":availabilityStatus GET,
equipmentPointer GET SET-BY-CREATE;
NOTIFICATIONS
"ITU-T Rec. X.721 | ISO/IEC 10165-2 : 1992":stateChange;;;
CONDITIONAL PACKAGES
"ITU-T Rec. M.3100 (1992)":createDeleteNotificationsPackage PRESENT IF "the
objectCreation and objectDeletion notifications defined in 'ITU-T Rec.
X.721 (1992) | ISO/IEC 10165-2 : 1992' are supported by an instance of
this class",
"ITU-T Rec. M.3100 (1992)":attributeValueChangeNotificationPackage PRESENT
IF "the attributeValueChangeNotification defined in 'ITU-T Rec. X.721
(1992) | ISO/IEC 10165-2 : 1992' is supported by an instance of this class",
signTermNamePackage PRESENT IF "an instance supports it";
REGISTERED AS { mtpObjectClass 14 };
stpScreeningTable MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":top;
CHARACTERIZED BY stpScreeningTablePkg PACKAGE
BEHAVIOUR stpScreeningTableBehaviour BEHAVIOUR DEFINED AS
"The stpScreeningTable object class is the base for STP screening.
Together with its subordinate stpScreeningTableLine's it contains all the
information which are necessary for an STP to identify and to handle
unauthorized SS No. 7 messages as defined in 8.2/Q.705 and 8.3/Q.705. ";;
ATTRIBUTES
stpScreeningTableId GET SET-BY-CREATE,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":administrativeState
INITIAL VALUE MTPDefinedTypesModule.administrativeStateLocked GET-REPLACE,
treatmentOfOutsideRanges GET-REPLACE,
stpScreeningTableListMode GET-REPLACE,
screeningByLinkSetOrByOpc GET SET-BY-CREATE;
NOTIFICATIONS
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":stateChange;;;
CONDITIONAL PACKAGES
"ITU-T Rec. M.3100 (1992)":attributeValueChangeNotificationPackage PRESENT
IF "the attributeValueChangeNotification defined in 'ITU-T Rec. X.721
(1992) | ISO/IEC 10165-2 : 1992' is supported by an instance of this class",
"ITU-T Rec. M.3100 (1992)":createDeleteNotificationsPackage PRESENT IF "the
objectCreation and objectDeletion notifications defined in 'ITU-T Rec.
X.721 (1992) | ISO/IEC 10165-2 : 1992' are supported by an instance of
this class",
getScreenedOpcsOrLinkSetsByDpcActionPackage PRESENT IF "an instance supports it",
stpScreeningTableNamePackage PRESENT IF "an instance supports it";
REGISTERED AS { mtpObjectClass 15 };
stpScreeningTableLine MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":top;
CHARACTERIZED BY stpScreeningTableLinePkg PACKAGE
BEHAVIOUR stpScreeningTableLineBehaviour BEHAVIOUR DEFINED AS
"The stpScreeningTableLine together with its superior stpScreeningTable
contains all the information which are necessary for an STP to identify
and to handle unauthorized SS No. 7 messages as defined in 8.2/Q.705 and
8.3/Q.705.
The total number of screened DPC's across all stpScreeningTableLine
instances contained by a stpScreeningTable must be less or equal to
maxNoOfScreenedDpcs.";;
ATTRIBUTES
stpScreeningTableLineId GET SET-BY-CREATE,
stpScreeningTableLineContent GET-REPLACE ADD-REMOVE;;;
CONDITIONAL PACKAGES
"ITU-T Rec. M.3100 (1992)":attributeValueChangeNotificationPackage PRESENT
IF "the attributeValueChangeNotification defined in 'ITU-T Rec. X.721
(1992) | ISO/IEC 10165-2 : 1992' is supported by an instance of this class",
"ITU-T Rec. M.3100 (1992)":createDeleteNotificationsPackage PRESENT IF "the
objectCreation and objectDeletion notifications defined in 'ITU-T Rec.
X.721 (1992) | ISO/IEC 10165-2 : 1992' are supported by an instance of
this class",
stpScreeningTableLineNamePackage PRESENT IF "an instance supports it";
REGISTERED AS { mtpObjectClass 16 };
administrativeStatePackage PACKAGE
BEHAVIOUR administrativeStatePackageBehaviour BEHAVIOUR DEFINED AS
"This package can be used for activiated and deactivated link sets. Possible
values of the administrativeState attribute are: locked and unlocked.
If transition takes place from locked to unlocked, this will result in
activiation of all links in the set that are unlocked.
If transition takes place from unlocked to locked, this will result in
deactiviation of all links in the set. This has no effect on the
administrative states of the links themselves";;
ATTRIBUTES
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":administrativeState GET-REPLACE;
REGISTERED AS { mtpPackage 1 };
bufferMechanismPackage PACKAGE
ATTRIBUTES
numberOfThresholdLevels GET SET-BY-CREATE;
REGISTERED AS { mtpPackage 2 };
cICPackage PACKAGE
ATTRIBUTES
cIC GET SET-BY-CREATE;
REGISTERED AS { mtpPackage 3 };
clsLoadsharingInformationPackage PACKAGE
ATTRIBUTES
inClsLoadsharingAlgorithm GET-REPLACE;
REGISTERED AS { mtpPackage 4 };
communicationsAlarmPackage PACKAGE
NOTIFICATIONS
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":communicationsAlarm
inaccessibleSp;
REGISTERED AS { mtpPackage 5 };
congestedStatePackage PACKAGE
BEHAVIOUR congestedStatePackageBehaviour BEHAVIOUR DEFINED AS
"This package supplies an attribute for the simple congestion method used
e.g. in the international network.";;
ATTRIBUTES
congestedState GET;
NOTIFICATIONS
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":attributeValueChange;
REGISTERED AS { mtpPackage 6 };
congestionHandlingPackage PACKAGE
ATTRIBUTES
congestionCounting GET SET-BY-CREATE,
congestionReportingBaseObject GET SET-BY-CREATE;
REGISTERED AS { mtpPackage 7 };
congestionLevelPackage PACKAGE
BEHAVIOUR congestionLevelPackageBehaviour BEHAVIOUR DEFINED AS
"This package supplies an attribute to allow for several congestion levels
for the signRouteSetNePart.";;
ATTRIBUTES
congestionLevel GET;
REGISTERED AS { mtpPackage 8 };
getScreenedOpcsOrLinkSetsByDpcActionPackage PACKAGE
ACTIONS
getScreenedOpcsOrLinkSetsByDpc;
REGISTERED AS { mtpPackage 9 };
fixedRouteNePartPriorityPackage PACKAGE
ATTRIBUTES
fixedPriority GET SET-BY-CREATE;
REGISTERED AS { mtpPackage 10 };
flexibleRouteNePartPriorityPackage PACKAGE
ATTRIBUTES
flexiblePriority GET-REPLACE,
priorityMode GET-REPLACE;
NOTIFICATIONS
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":attributeValueChange;
REGISTERED AS { mtpPackage 11 };
inLsLoadShareAlgorithmPackage PACKAGE
ATTRIBUTES
inLsLoadShareAlgorithm GET SET-BY-CREATE;
-- in some implementations the inLsLoadShareAlgorithm attribute might be
-- additionally writable
REGISTERED AS { mtpPackage 12 };
linkCongestionLevelPackage PACKAGE
ATTRIBUTES
linkCongestionLevel GET;
REGISTERED AS { mtpPackage 13 };
loadsharingInformationRouteNePartPackage PACKAGE
ATTRIBUTES
loadsharingInformationRouteNePart GET-REPLACE;
REGISTERED AS { mtpPackage 14 };
loadsharingInformationRouteSetNePartPackage PACKAGE
ATTRIBUTES
loadsharingInformationRouteSetNePart GET-REPLACE;
REGISTERED AS { mtpPackage 15 };
loopDelayPackage PACKAGE
ATTRIBUTES
loopDelay GET SET-BY-CREATE;
REGISTERED AS { mtpPackage 16 };
lsTimersProfileNamePackage PACKAGE
ATTRIBUTES
lsTimersProfileName GET-REPLACE;
REGISTERED AS { mtpPackage 17 };
lsTimersProfilePointerPackage PACKAGE
ATTRIBUTES
lsTimersProfilePointer GET-REPLACE;
REGISTERED AS { mtpPackage 18 };
managedSwitchingElementNamePackage PACKAGE
ATTRIBUTES
managedSwitchingElementName GET-REPLACE;
REGISTERED AS { mtpPackage 19 };
mtpAccessPointNamePackage PACKAGE
ATTRIBUTES
mtpAccessPointName GET-REPLACE;
REGISTERED AS { mtpPackage 20 };
mtpL2ProtocolProfileNamePackage PACKAGE
ATTRIBUTES
mtpL2ProtocolProfileName GET-REPLACE;
REGISTERED AS { mtpPackage 21 };
mtpLevel3NamePackage PACKAGE
ATTRIBUTES
mtpLevel3Name GET-REPLACE;
REGISTERED AS { mtpPackage 22 };
mtpLoadsharingObjectForRouteNePartPointerPackage PACKAGE
ATTRIBUTES
mtpLoadsharingObjectForRouteNePartPointer GET-REPLACE;
REGISTERED AS { mtpPackage 23 };
mtpLoadsharingObjectForRouteSetNePartPointerPackage PACKAGE
ATTRIBUTES
mtpLoadsharingObjectForRouteSetNePartPointer GET-REPLACE;
REGISTERED AS { mtpPackage 24 };
mtpSignPointNamePackage PACKAGE
ATTRIBUTES
mtpSignPointName GET-REPLACE;
REGISTERED AS { mtpPackage 25 };
multipleTransmissionCongestionLevelsPackage PACKAGE
BEHAVIOUR multipleTransmissionCongestionLevelsPackageBehaviour BEHAVIOUR DEFINED AS
"This package contains the second and third levels of transmission
congestion. The values of the thresholds belonging to congestion level 2
have to be bigger than the respective ones of congestion level 1. The values
of the thresholds belonging to congestion level 3 have to be bigger than the
respective ones of congestion level 2.";;
ATTRIBUTES
transmissionCongestionThresholdDiscardLevel1 GET SET-BY-CREATE,
transmissionCongestionThresholdOnsetLevel2 GET SET-BY-CREATE,
transmissionCongestionThresholdAbatementLevel2 GET SET-BY-CREATE,
transmissionCongestionThresholdDiscardLevel2 GET SET-BY-CREATE,
transmissionCongestionThresholdOnsetLevel3 GET SET-BY-CREATE,
transmissionCongestionThresholdAbatementLevel3 GET SET-BY-CREATE,
transmissionCongestionThresholdDiscardLevel3 GET SET-BY-CREATE;
REGISTERED AS { mtpPackage 26};
multipleTransmissionCongestionStatesPackage PACKAGE
BEHAVIOUR multipleTransmissionCongestionStatesPackageBehaviour BEHAVIOUR DEFINED AS
"This package contains the attributes related to the management of 'multiple
link congestion states without congestion priority' method. This method is
described in 3.8.2.3/Q.704. See also B.1.2.9.2. The range of
initialLevelIfCongested is [1,numberOfCongestionStates].";;
ATTRIBUTES
timerTx GET SET-BY-CREATE,
timerTy GET SET-BY-CREATE,
numberOfCongestionStates GET SET-BY-CREATE,
initialLevelIfCongested GET SET-BY-CREATE;
REGISTERED AS { mtpPackage 27 };
noBasicLinkAllocationPackage PACKAGE
ATTRIBUTES
numberOfNormallyActiveSignLinksTps GET-REPLACE;
REGISTERED AS { mtpPackage 28 };
pCRPackage PACKAGE
BEHAVIOUR pCRPackageBehaviour BEHAVIOUR DEFINED AS
"This package contains signLinkTp attributes for the PCR method";;
ATTRIBUTES
maxMSUsRetransN1 GET SET-BY-CREATE,
maxOctRetransN2 GET SET-BY-CREATE;
REGISTERED AS { mtpPackage 29 };
receiveCongestionLevelsPackage PACKAGE
BEHAVIOUR receiveCongestionLevelsPackageBehaviour BEHAVIOUR DEFINED AS
"This package contains the levels of receive congestions";;
ATTRIBUTES
receiveCongestionThresholdOnset GET SET-BY-CREATE,
receiveCongestionThresholdAbatement GET SET-BY-CREATE;
REGISTERED AS { mtpPackage 30 };
relatedLinkGroupNumberPackage PACKAGE
ATTRIBUTES
relatedLinkGroupNumber GET-REPLACE;
REGISTERED AS { mtpPackage 31 };
remoteExchangeLabelPackage PACKAGE
BEHAVIOUR remoteExchangeLabelPackageBehaviour BEHAVIOUR DEFINED AS
"This package supplies the possibility to have textual information about the
remote exchange that contains the destination signalling point.";;
ATTRIBUTES
remoteExchangeLabel GET-REPLACE;
REGISTERED AS { mtpPackage 32 };
signDataLinkTpListPackage PACKAGE
ATTRIBUTES
signDataLinkTpList GET --ADD-REMOVE-- SET-BY-CREATE;
REGISTERED AS { mtpPackage 33 };
signDataLinkTpNamePackage PACKAGE
ATTRIBUTES
signDataLinkTpName GET-REPLACE;
REGISTERED AS { mtpPackage 34 };
signLinkSetTpNamePackage PACKAGE
ATTRIBUTES
signLinkSetTpName GET-REPLACE;
REGISTERED AS { mtpPackage 35 };
signLinkTestPackage PACKAGE
ACTIONS
signLinkTest;
REGISTERED AS { mtpPackage 36 };
signLinkTpNamePackage PACKAGE
ATTRIBUTES
signLinkTpName GET-REPLACE;
REGISTERED AS { mtpPackage 37 };
signRouteNePartNamePackage PACKAGE
ATTRIBUTES
signRouteNePartName GET-REPLACE;
REGISTERED AS { mtpPackage 38 };
signRouteSetNePartNamePackage PACKAGE
ATTRIBUTES
signRouteSetNePartName GET-REPLACE;
REGISTERED AS { mtpPackage 39 };
signTermListPackage PACKAGE
ATTRIBUTES
signTermList GET --ADD-REMOVE-- SET-BY-CREATE;
REGISTERED AS { mtpPackage 40 };
signTermNamePackage PACKAGE
ATTRIBUTES
signTermName GET-REPLACE;
REGISTERED AS { mtpPackage 41 };
slsCodeNormalListPackage PACKAGE
ATTRIBUTES
slsCodeNormalList GET SET-BY-CREATE;
-- in some implementations this attribute might additionally be writable
REGISTERED AS { mtpPackage 42 };
slsListPackage PACKAGE
ATTRIBUTES
slsList GET SET-BY-CREATE;
REGISTERED AS { mtpPackage 43 };
slTimersProfileNamePackage PACKAGE
ATTRIBUTES
slTimersProfileName GET-REPLACE;
REGISTERED AS { mtpPackage 44 };
slTimersProfilePointerPackage PACKAGE
ATTRIBUTES
slTimersProfilePointer GET-REPLACE;
REGISTERED AS { mtpPackage 45 };
spTimersPackage PACKAGE
BEHAVIOUR spTimersPackageBehaviour BEHAVIOUR DEFINED AS
"This package contains the values of the Q.704 and Q.707 timers.";;
ATTRIBUTES
q704-t1 GET SET-BY-CREATE,
q704-t2 GET SET-BY-CREATE,
q704-t3 GET SET-BY-CREATE,
q704-t4 GET SET-BY-CREATE,
q704-t5 GET SET-BY-CREATE,
q704-t6 GET SET-BY-CREATE,
q704-t7 GET SET-BY-CREATE,
q704-t8 GET SET-BY-CREATE,
q704-t10 GET SET-BY-CREATE,
q704-t11 GET SET-BY-CREATE,
q704-t12 GET SET-BY-CREATE,
q704-t13 GET SET-BY-CREATE,
q704-t14 GET SET-BY-CREATE,
q704-t15 GET SET-BY-CREATE,
q704-t16 GET SET-BY-CREATE,
q704-t17 GET SET-BY-CREATE,
q704-t18 GET SET-BY-CREATE,
q704-t19 GET SET-BY-CREATE,
q704-t20 GET SET-BY-CREATE,
q704-t21 GET SET-BY-CREATE,
q704-t22 GET SET-BY-CREATE,
q704-t23 GET SET-BY-CREATE,
q704-t24 GET SET-BY-CREATE,
q707-t1 GET SET-BY-CREATE,
q707-t2 GET SET-BY-CREATE;
REGISTERED AS { mtpPackage 46 };
spTimersProfileNamePackage PACKAGE
ATTRIBUTES
spTimersProfileName GET-REPLACE;
REGISTERED AS { mtpPackage 47 };
spTimersProfilePointerPackage PACKAGE
ATTRIBUTES
spTimersProfilePointer GET-REPLACE;
REGISTERED AS { mtpPackage 48 };
ss7OnOccEventPackage PACKAGE
NOTIFICATIONS
ss7OnOccEvent
changeInLsToAdjSp
inaccessibleSp
remoteUserPartUnavailable;
REGISTERED AS { mtpPackage 49 };
stmChannelPackage PACKAGE
ATTRIBUTES
stmChannel GET;
REGISTERED AS { mtpPackage 50 };
stpScreeningTableLineNamePackage PACKAGE
ATTRIBUTES
stpScreeningTableLineName GET-REPLACE;
REGISTERED AS { mtpPackage 56 };
stpScreeningTableNamePackage PACKAGE
ATTRIBUTES
stpScreeningTableName GET-REPLACE;
REGISTERED AS { mtpPackage 51 };
usageStatePackage PACKAGE
BEHAVIOUR usageStatePackageBehaviour BEHAVIOUR DEFINED AS
"This package supplies a possibility to cover 'transfer restricted' for a route.";;
ATTRIBUTES
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":usageState GET;
REGISTERED AS { mtpPackage 52 };
changeInLsToAdjSp PARAMETER
CONTEXT EVENT-INFO;
WITH SYNTAX MTPDefinedTypesModule.ChangeInLsToAdjSpInfo;
REGISTERED AS { mtpParameter 1 };
inaccessibleSp PARAMETER
CONTEXT EVENT-INFO;
WITH SYNTAX MTPDefinedTypesModule.InaccessibleSpInfo;
REGISTERED AS { mtpParameter 2 };
remoteUserPartUnavailable PARAMETER
CONTEXT EVENT-INFO;
WITH SYNTAX MTPDefinedTypesModule.UserPart;
REGISTERED AS { mtpParameter 3 };
adjPc ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.PointCode;
MATCHES FOR EQUALITY;
BEHAVIOUR adjPcBehaviour BEHAVIOUR DEFINED AS
"This attribute represents the pointcode of an adjacent SP.";;
REGISTERED AS { mtpAttribute 1 };
cIC ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Cic;
MATCHES FOR EQUALITY;
BEHAVIOUR cicBehaviour BEHAVIOUR DEFINED AS
"This attribute is used to reference the SS No. 7 trunk used by the
datalink. Its value has to be unique within the SP's connected by the trunk.";;
REGISTERED AS { mtpAttribute 2 };
congestedState ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.CongestedState;
MATCHES FOR EQUALITY;
BEHAVIOUR congestedStateBehaviour BEHAVIOUR DEFINED AS
"This attribute is used to reflect route set congestion, if no multiple
congestion levels are used. Its value is 'congested' in case of route set
congestion. Its value can change from system inside.";;
REGISTERED AS { mtpAttribute 3 };
congestionControlMethod ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.CongestionControlMethod;
BEHAVIOUR congestionControlMethodBehaviour BEHAVIOUR DEFINED AS
"This attribute reflects the congestion control method used within a
signalling point.";;
REGISTERED AS { mtpAttribute 4 };
congestionCounting ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.CongestionCounting;
BEHAVIOUR congestionCountingBehaviour BEHAVIOUR DEFINED AS
"This attribute indicates whether congestion counting is message based or
octet based.";;
REGISTERED AS { mtpAttribute 5 };
congestionLevel ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.CongestionLevel;
MATCHES FOR EQUALITY;
BEHAVIOUR congestionLevelBehaviour BEHAVIOUR DEFINED AS
"This attribute is used to reflect route set congestion, if multiple
congestion levels are used. Its value in case of no congestion is 'none'.
Its value can change from system inside.";;
REGISTERED AS { mtpAttribute 6 };
congestionReportingBaseObject ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.CongestionReportingBaseObject;
BEHAVIOUR congestionReportingBaseObjectBehaviour BEHAVIOUR DEFINED AS
"This attribute indicates on what object congestion counting is based.";;
REGISTERED AS { mtpAttribute 7 };
currentCapacityLS ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.CapacityLS;
BEHAVIOUR currentCapacityLSBehaviour BEHAVIOUR DEFINED AS
"This attribute represents the current capacity of a signalling link set.";;
REGISTERED AS { mtpAttribute 8 };
currentCapacitySL ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.CapacityLink;
BEHAVIOUR currentCapacitySLBehaviour BEHAVIOUR DEFINED AS
"This attribute represents the current capacity of a signalling link.";;
REGISTERED AS { mtpAttribute 9 };
dpc ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.PointCode;
MATCHES FOR EQUALITY;
BEHAVIOUR dpcBehaviour BEHAVIOUR DEFINED AS
"This attribute represents a destination pointcode.";;
REGISTERED AS { mtpAttribute 10 };
equipmentPointer ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Pointer;
MATCHES FOR EQUALITY;
BEHAVIOUR equipmentPointerBehaviour BEHAVIOUR DEFINED AS
"This attribute is used to reference physical equipment.";;
REGISTERED AS { mtpAttribute 11 };
errorCorrectionMethod ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.ErrorCorrectionMethod;
MATCHES FOR EQUALITY;
BEHAVIOUR errorCorrectionMethodBehaviour BEHAVIOUR DEFINED AS
"This attribute is used to specify the type of error-correction the
signalling link is using.";;
REGISTERED AS { mtpAttribute 12 };
fixedPriority ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.FixedPriority;
BEHAVIOUR fixedPriorityBehaviour BEHAVIOUR DEFINED AS
"This attribute determines, if the signRouteNePart is used as current route.
The signRouteNePart instances with operational state = 'enabled' contained
in the same signRouteSetNePart are chosen in ascending order as current
routes (The lower the value, the higher the priority).
There are different behaviours for the handling of 'priority gaps' possible:
i) priorityGapAllowedBEHAVIOUR ii) priorityGapNotAllowedBehaviour:
In the latter case it is not possible, to have a priority value, if there is
a lower value, which is not used in one of the routes of the route set. E.g.
in case of deleting a signRouteNePart instance whose priority value is not
equal to the priority of at least one of the remaining signRouteNeParts
contained in the same signRouteSetNePart, the priority values of the
remaining instances have to be decremented by one (see also example in table below).
What kind of priority gap behaviour is performed by the switch is to be
derived from the combination of the values of the attributes vendorName and
version of the managedSwitchingElement.";;
REGISTERED AS { mtpAttribute 13 };
flexiblePriority ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.FlexiblePriority;
BEHAVIOUR flexiblePriorityBehaviour BEHAVIOUR DEFINED AS
"This attribute determines, if the signRouteNePart is used as current route.
The signRouteNePart instances with operational state = 'enabled' contained
in the same signRouteSetNePart are chosen in ascending order as current
routes (The lower the value, the higher the priority).
There are different behaviours for the handling of 'priority gaps' possible:
i) priorityGapAllowedBEHAVIOUR ii) priorityGapNotAllowedBehaviour:
In the latter case it is not possible, to have a priority value. If there is
a lower value, which is not used in one of the routes of the route set. E.g.
in case of deleting a signRouteNePart instance whose priority value is not
equal to the priority of at least one of the remaining signRouteNeParts
contained in the same signRouteSetNePart, the priority values of the
remaining instances have to be decremented by one (see also example in table below).
What kind of priority gap behaviour is performed by the switch is to be
derived from the combination of the values of the attributes vendorName and
version of the managedSwitchingElement.
This attribute is writable only together with the attribute priorityMode.";;
REGISTERED AS { mtpAttribute 14 };
inClsLoadsharingAlgorithm ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.InClsLoadsharingAlgorithm;
BEHAVIOUR inClsLoadsharingAlgorithmBehaviour BEHAVIOUR
DEFINED AS
"This attribute represents the over- and in-link set loadsharing algorithm
within a combined link set.";;
REGISTERED AS { mtpAttribute 15 };
initialLevelIfCongested ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.InitialLevelIfCongested;
BEHAVIOUR initialLevelIfCongestedBehaviour BEHAVIOUR DEFINED AS
"This attribute represents the initial level of congestion.";;
REGISTERED AS { mtpAttribute 16 };
inLsLoadShareAlgorithm ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.InLsLoadShareAlgorithm;
BEHAVIOUR inLsLoadShareAlgorithmBehaviour BEHAVIOUR DEFINED AS
"The inLsLoadShareAlgorithm specifies a registered, vendor-specific
within-linkset loadsharing algorithm.";;
REGISTERED AS { mtpAttribute 17 };
l2TimerT1 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.L2TimerT1;
BEHAVIOUR l2TimerT1Behaviour BEHAVIOUR
DEFINED AS
"Q.703: Level 2 timer 'Alignment ready'. The unit for the INTEGER range is
milliseconds.";;
REGISTERED AS { mtpAttribute 18 };
l2TimerT2 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.L2TimerT2;
BEHAVIOUR l2TimerT2Behaviour BEHAVIOUR
DEFINED AS
"Q.703: Level 2 timer 'Not aligned'. The unit for the INTEGER range is
milliseconds.";;
REGISTERED AS { mtpAttribute 19 };
l2TimerT3 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.L2TimerT3;
BEHAVIOUR l2TimerT3Behaviour BEHAVIOUR
DEFINED AS
"Q.703: Level 2 timer 'Aligned'. The unit for the INTEGER range is
milliseconds.";;
REGISTERED AS { mtpAttribute 20 };
l2TimerT4E ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.L2TimerT4E;
BEHAVIOUR l2TimerT4eBehaviour BEHAVIOUR
DEFINED AS
"Q.703: Level 2 timer 'Proving period timer emergency'. The unit for the
INTEGER range is milliseconds.";;
REGISTERED AS { mtpAttribute 21 };
l2TimerT4N ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.L2TimerT4N;
BEHAVIOUR l2TimerT4nBehaviour BEHAVIOUR
DEFINED AS
"Q.703: Level 2 timer 'Proving period timer normal'. The unit for the
INTEGER range is milliseconds.";;
REGISTERED AS { mtpAttribute 22 };
l2TimerT5 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.L2TimerT5;
BEHAVIOUR l2TimerT5Behaviour BEHAVIOUR
DEFINED AS
"Q.703: Level 2 timer 'Sending SIB'. The unit for the INTEGER range is
milliseconds.";;
REGISTERED AS { mtpAttribute 23 };
l2TimerT6 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.L2TimerT6;
BEHAVIOUR l2TimerT6Behaviour BEHAVIOUR
DEFINED AS
"Q.703: Level 2 timer 'Remote congestion'. The unit for the INTEGER range
is milliseconds.";;
REGISTERED AS { mtpAttribute 24 };
l2TimerT7 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.L2TimerT7;
BEHAVIOUR l2TimerT7Behaviour BEHAVIOUR
DEFINED AS
"Q.703: Delay to avoid message mis-sequence on changeover. The unit for
the INTEGER range is milliseconds.";;
REGISTERED AS { mtpAttribute 25 };
linkCongestionLevel ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.CongestionLevel;
MATCHES FOR EQUALITY;
BEHAVIOUR linkCongestionLevelBehaviour BEHAVIOUR DEFINED AS
"This attribute is used to reflect link congestion, if multiple congestion
levels are used. Its value in case of no congestion is 'none'. Its value can
change from system inside.";;
REGISTERED AS { mtpAttribute 26 };
linkTpStatus ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.LinkTPStatus;
MATCHES FOR EQUALITY;
BEHAVIOUR linkTpStatusBehaviour BEHAVIOUR DEFINED AS
"The linkTpStatus contains the SS No. 7 functional statuses as described in
Recommendation Q.704. Possible states indicated are local blocked, remote
blocked, local inhibited, remote inhibited, failed and deactivated.";;
REGISTERED AS { mtpAttribute 27 };
loadsharingInformationRouteNePart ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.LoadsharingInformationRouteNePart;
BEHAVIOUR loadsharingInformationRouteNePartBehaviour BEHAVIOUR DEFINED AS
"This attribute contains specific information for target specific
loadsharing via the current routes working on a route basis. This
information can be used by e.g. the referenced mtpLoadsharingObjectFor-Route
to execute the target specific loadsharing.";;
REGISTERED AS { mtpAttribute 28 };
loadsharingInformationRouteSetNePart ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.LoadsharingInformationRouteSetNePart;
BEHAVIOUR loadsharingInformationRouteSetNePartBehaviour BEHAVIOUR DEFINED AS
"This attribute contains specific information for target specific
loadsharing via the current routes working on a routeset basis via the
current routes. This information can be used by e.g. the referenced
mtpLoadsharingObjectFor-RouteSet to execute the target specific loadsharing.";;
REGISTERED AS { mtpAttribute 29 };
loopDelay ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.LoopDelay;
MATCHES FOR EQUALITY;
BEHAVIOUR loopDelayBehaviour BEHAVIOUR DEFINED AS
"This attribute models loop delay.";;
REGISTERED AS { mtpAttribute 30 };
lsTimersProfileId ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.NameType;
MATCHES FOR EQUALITY;
BEHAVIOUR lsTimersProfileIdBehaviour BEHAVIOUR DEFINED AS
"This attribute is used for naming instances.";;
REGISTERED AS { mtpAttribute 31 };
lsTimersProfileName ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.AdditionalName;
MATCHES FOR EQUALITY;
BEHAVIOUR lsTimersProfileNameBehaviour BEHAVIOUR DEFINED AS
"This attribute is an additional name for instances of the lsTimersProfile
managed object class. A set request is rejected if the name is already used
by another instance of the same class.";;
REGISTERED AS { mtpAttribute 32 };
lsTimersProfilePointer ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Pointer;
MATCHES FOR EQUALITY;
BEHAVIOUR lsTimersProfilePointerBehaviour BEHAVIOUR DEFINED AS
"This attribute to the instance of the class lsTimersProfile, containing the
Q.704 timers for the signalling link set.";;
REGISTERED AS { mtpAttribute 33 };
managedSwitchingElementName ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.AdditionalName;
MATCHES FOR EQUALITY;
BEHAVIOUR managedSwitchingElementNameBehaviour BEHAVIOUR DEFINED AS
"This attribute is an additional name for instances of the
managedSwitchingElement managed object class. A set request is rejected if
the name is already used by another instance of the same class.";;
REGISTERED AS { mtpAttribute 34 };
maxCapacityLS ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.CapacityLS;
REGISTERED AS { mtpAttribute 35 };
maxCapacitySL ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.CapacityLink;
REGISTERED AS { mtpAttribute 36 };
maxMSUsRetransN1 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.MaxMSUsRetransN1;
BEHAVIOUR maxMSUsRetransN1Behaviour BEHAVIOUR
DEFINED AS
"This attribute specifies the maximum number of MSUs which are available
for retransmission (name in Q.703:N1).";;
REGISTERED AS { mtpAttribute 37 };
maxOctRetransN2 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.MaxOctRetransN2;
BEHAVIOUR maxOctRetransN2Behaviour BEHAVIOUR DEFINED AS
"This attribute specifies the maximum number of octets, which are available
for retransmission (Q.703: N2).";;
REGISTERED AS { mtpAttribute 38 };
mtpAccessPointName ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.AdditionalName;
MATCHES FOR EQUALITY;
BEHAVIOUR mtpAccessPointNameBehaviour BEHAVIOUR DEFINED AS
"This attribute is an additional name for instances of the mtpAccessPoint
managed object class. A set request is rejected if the name is already used
by another instance of the same class.";;
REGISTERED AS { mtpAttribute 39 };
mtpL2ProtocolProfileId ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.NameType;
MATCHES FOR EQUALITY;
BEHAVIOUR mtpL2ProtocolProfileIdBehaviour BEHAVIOUR
DEFINED AS
"Identifies a mtpL2ProtocolProfile instance within the
managedSwitching-element; this is an attribute type whose distinguished
value can be used as an RDN when naming an instance of the
mtpL2ProtocolProfile object class.";;
REGISTERED AS { mtpAttribute 40 };
mtpL2ProtocolProfileName ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.AdditionalName;
MATCHES FOR EQUALITY;
BEHAVIOUR mtpL2ProtocolProfileNameBehaviour BEHAVIOUR DEFINED AS
"This attribute is an additional name for instances of the
mtpL2ProtocolProfile managed object class. A set request is rejected if the
name is already used by another instance of the same class.";;
REGISTERED AS { mtpAttribute 41 };
protocolProfilePointer ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Pointer;
MATCHES FOR EQUALITY;
BEHAVIOUR protocolProfilePointerBehaviour BEHAVIOUR
DEFINED AS
"Identifies an protocolProfile instance.";;
REGISTERED AS { mtpAttribute 42 };
mtpLevel3Id ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.NameType;
MATCHES FOR EQUALITY;
BEHAVIOUR mtpLevel3IdBehaviour BEHAVIOUR DEFINED AS
"This attribute is used for naming instances.";;
REGISTERED AS { mtpAttribute 43 };
mtpLevel3Name ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.AdditionalName;
MATCHES FOR EQUALITY;
BEHAVIOUR mtpLevel3NameBehaviour BEHAVIOUR DEFINED AS
"This attribute is an additional name for instances of the mtpLevel3 managed
object class. A set request is rejected if the name is already used by
another instance of the same class.";;
REGISTERED AS { mtpAttribute 44 };
mtpLoadsharingObjectForRouteNePartPointer ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Pointer;
MATCHES FOR EQUALITY;
BEHAVIOUR mtpLoadsharingObjectForRouteNePartPointerBehaviour BEHAVIOUR DEFINED AS
"This attribute is used to reference implementation dependent loadsharing
object class instances needed to model implementation dependent mechanisms
for loadsharing over linksets working on a route basis.";;
REGISTERED AS { mtpAttribute 45 };
mtpLoadsharingObjectForRouteSetNePartPointer ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Pointer;
MATCHES FOR EQUALITY;
BEHAVIOUR mtpLoadsharingObjectForRouteSetNePartPointerBehaviour BEHAVIOUR DEFINED AS
"This attribute is used to reference implementation dependent loadsharing
object class instances needed to model implementation dependent mechanisms
for loadsharing over linksets working on a routeset basis.";;
REGISTERED AS { mtpAttribute 46 };
mtpSignPointId ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.NameType;
MATCHES FOR EQUALITY;
BEHAVIOUR mtpSignPointIdBehaviour BEHAVIOUR DEFINED AS
"This attribute is used for naming instances.";;
REGISTERED AS { mtpAttribute 47 };
mtpSignPointName ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.AdditionalName;
MATCHES FOR EQUALITY;
BEHAVIOUR mtpSignPointNameBehaviour BEHAVIOUR DEFINED AS
"This attribute is an additional name for instances of the mtpSignPoint
managed object class. A set request is rejected if the name is already used
by another instance of the same class.";;
REGISTERED AS { mtpAttribute 48 };
networkIndicator ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.NetworkIndicator;
MATCHES FOR EQUALITY;
BEHAVIOUR networkIndicatorBehaviour BEHAVIOUR DEFINED AS
"This attribute models the network indicator of the network the signalling
point belongs to.";;
REGISTERED AS { mtpAttribute 49 };
numberOfCongestionStates ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.NumCongStates;
MATCHES FOR EQUALITY;
BEHAVIOUR numberOfCongestionStatesBehaviour BEHAVIOUR DEFINED AS
"This attribute specifies the number of congestion states used in the
'multiple link congestion states without congestion priority' mechanism as
described in 3.8.2.3/Q.704.";;
REGISTERED AS { mtpAttribute 50 };
numberOfNormallyActiveSignLinksTps ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.NumberOfNormallyActiveSignLinksTps;
MATCHES FOR EQUALITY;
BEHAVIOUR numberOfNormallyActiveSignLinksTpsBehaviour BEHAVIOUR DEFINED AS
"This attribute represents the number of normally active signalling links in
a link set, as defined in clause 12/Q.704.";;
REGISTERED AS { mtpAttribute 51 };
numberOfThresholdLevels ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.NumberOfThresholdLevels;
BEHAVIOUR numberOfThresholdsLevelsBehaviour BEHAVIOUR DEFINED AS
"This attribute equals the number of threshold levels that are used for
congestion control.";;
REGISTERED AS { mtpAttribute 52 };
opc ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.PointCode;
MATCHES FOR EQUALITY;
BEHAVIOUR opcBehaviour BEHAVIOUR DEFINED AS
"This attribute represents the pointcode of an SP from which a certain
message has been originated.";;
REGISTERED AS { mtpAttribute 53 };
periodicLinkTestFlag ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.PeriodicLinkTestFlag;
BEHAVIOUR periodicLinkTestFlagBehaviour BEHAVIOUR DEFINED AS
"This attribute indicates whether the periodical signalling link test
procedure of Recommendation Q.707 is applied to a link set.";;
REGISTERED AS { mtpAttribute 54 };
pointCode ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.PointCode;
MATCHES FOR EQUALITY;
BEHAVIOUR pointCodeBehaviour BEHAVIOUR DEFINED AS
"This attribute represents the pointcode of a certain SP.";;
REGISTERED AS { mtpAttribute 55 };
priorityMode ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.PriorityMode;
BEHAVIOUR priorityModeBehaviour BEHAVIOUR DEFINED AS
"This attribute is necessary in case of creating a signRouteNePart instance
or modifiying its priority attribute. It describes the influence of the
management action on the priority attributes of other signRouteNePart
instances contained in the same signRouteSetNePart.
This attribute is only writable, and this only together with the writing of
attribute flexiblePriority. The meanings of the attribute values are:
EQUAL: If by modifying the priority with priorityMode 'EQUAL' a 'priority
gap' would come into existence, then for the priorities of all created
signRouteNePart instances from the same signRouteSetNePart with priorities
lower than the 'gap priority' the priority value has to be decremented by one.
INSERT: Priority values of all created signRouteNePart instances from the
same signRouteSetNePart with equal or lower priorities are incremented by one.
EXCHANGE_SINGLE: The priority values of all created signRouteNePart
instances from the same signRouteSetNePart which have the specified 'target'
priority value, are exchanged for the last ('starting') priority value of
the specified signRouteNePart instance.
EXCHANGE_GROUP: The priority values of all created signRouteNePart instances
from the same signRouteSetNePart which have the specified 'target' priority
value, are exchanged for the last ('starting') priority value of the
specified signRouteNePart instance. Additionally the priority values of all
created signRouteNePart instances from the same signRouteSetNePart, which
have the same value as the 'starting' priority value of the specified
signRouteNePart instance, are changed to the 'target' value.";;
REGISTERED AS { mtpAttribute 56 };
q704-t1 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t1Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T1 'Delay to avoid
message mis-sequencing on changeover from this link' defined in
Recommendation Q.704. The value range is from 500 to 1200 ms. For routes
with long propagation delays a minimum value of 800 ms is used.The same
value applies for all links associated with an instance of the procedure.";;
REGISTERED AS { mtpAttribute 57 };
q704-t2 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t2Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T2 'Waiting for
changeover acknowledgement' defined in Recommendation Q.704. The value range
is from 700 to 2000 ms. For routes with long propagation delays a minimum
value of 1400 ms is used.";;
REGISTERED AS { mtpAttribute 58 };
q704-t3 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t3Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T3 'Time controlled
diversion-delay to avoid mis-sequencing on changeback from this link'
defined in Recommendation Q.704. The value range is from 500 to 1200 ms. For
routes with long propagation delays a minimum value of 800 ms is used. The
value of this attribute is network implementation dependent.";;
REGISTERED AS { mtpAttribute 59 };
q704-t4 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t4Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T4 'Waiting for
changeback acknowledgement (first attempt)' defined in Recommendation Q.704.
The value range is from 500 to 1200 ms. For routes with long propagation
delays a minimum value of 800 ms is used.";;
REGISTERED AS { mtpAttribute 60 };
q704-t5 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t5Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T5 'Waiting for
changeback acknowledgement (second attempt)' defined in Recommendation
Q.704. The value range is from 500 to 1200 ms. For routes with long
propagation delays a minimum value of 800 ms is used.";;
REGISTERED AS { mtpAttribute 61 };
q704-t6 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t6Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T6 'Delay to avoid
message mis-sequencing on controlled rerouting' defined in Recommendation
Q.704. The value range is from 500 to 1200 ms. For routes with long
propagation delays a minimum value of 800 ms is used.";;
REGISTERED AS { mtpAttribute 62 };
q704-t7 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t7Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T7 'Waiting for
signalling data link connection acknowledgement' defined in Recommendation
Q.704. The value range is from 1 to 2 seconds.";;
REGISTERED AS { mtpAttribute 63 };
q704-t8 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t8Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T8 'Transfer
prohibited inhibition timer (transient solution)' defined in Recommendation
Q.704. The value range is from 800 to 1200 ms.";;
REGISTERED AS { mtpAttribute 64 };
q704-t10 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t10Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T10 'Waiting to
repeat signalling route set test message' defined in Recommendation Q.704.
The value range is from 30 to 60 seconds. The maximum value may be extended
at the discretion of the management function in certain situations, e.g.
many signalling points being unavailable or signalling points of known long
term unavailability.";;
REGISTERED AS { mtpAttribute 65 };
q704-t11 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t11Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T11 'Transfer
restricted timer' defined in Recommendation Q.704. The value range is from
30 to 90 seconds. This is one way of implementing the function described in
13.4/Q.704 and mainly intended to simplify STPs.";;
REGISTERED AS { mtpAttribute 66 };
q704-t12 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t12Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T12 'Waiting for
uninhibit acknowledgement' defined in Recommendation Q.704. The value range
is from 800 to 1500 ms.";;
REGISTERED AS { mtpAttribute 67 };
q704-t13 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t13Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T13 'Waiting for
force uninhibit' defined in Recommendation Q.704. The value range is from
800 to 1500 ms.";;
REGISTERED AS { mtpAttribute 68 };
q704-t14 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t14Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T14 'Waiting for
inhibition acknowledgement' defined in Recommendation Q.704. The value range
is from 2 to 3 seconds.";;
REGISTERED AS { mtpAttribute 69 };
q704-t15 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t15Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T15 'Waiting to
start signalling route set congestion test' defined in Recommendation Q.704.
The value range is from 2 to 3 seconds.";;
REGISTERED AS { mtpAttribute 70 };
q704-t16 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t16Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T16 'Waiting for
route set congestion status update' defined in Recommendation Q.704. The
value range is from 1.4 to 2 seconds.";;
REGISTERED AS { mtpAttribute 71 };
q704-t17 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t17Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T17 'Delay to avoid
oscillation of initial alignment failure and link restart' defined in
Recommendation Q.704. The value range is from 800 to 1500 ms. The value
should be less than the corresponding timer 2 in 12.2.1.2/Q.703.";;
REGISTERED AS { mtpAttribute 72 };
q704-t18 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t18Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T18 defined in
Recommendation Q.704. T18 is the Timer within a signalling point whose MTP
restarts, for supervising link and linkset activation as well as the receipt
of routing information. The value is implementation and network dependent.
Criteria to choose T18 are given in 9.2/Q.704.";;
REGISTERED AS { mtpAttribute 73 };
q704-t19 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t19Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T19 'Supervision
timer during MTP restart to avoid possible ping-pong of TFP, TFR and TRA
messages.' defined in Recommendation Q.704. The value range is from 67 to 69
seconds.";;
REGISTERED AS { mtpAttribute 74 };
q704-t20 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t20Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T20 'Overall MTP
restart timer at the signalling point whose MTP restarts.' defined in
Recommendation Q.704. The value range is from 59 to 61 seconds.";;
REGISTERED AS { mtpAttribute 75 };
q704-t21 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t21Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T21 'Overall MTP
restart timer at a signalling point adjacent to one whose MTP restarts.'
defined in Recommendation Q.704. The value range is from 63 to 65 seconds.";;
REGISTERED AS { mtpAttribute 76 };
q704-t22 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t22Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T22 'Local inhibit
test timer' defined in Recommendation Q.704. The value range is from 3 to 6
minutes (provisional value).";;
REGISTERED AS { mtpAttribute 77 };
q704-t23 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t23Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T23 'Remote inhibit
test timer' defined in Recommendation Q.704. The value range is from 3 to 6
minutes (provisional value).";;
REGISTERED AS { mtpAttribute 78 };
q704-t24 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q704-t24Behaviour BEHAVIOUR DEFINED AS
"This attribute defines the initial timer value of timer T24 'Stabilising
timer after removal of local processor outage, used in LPO latching to RPO
(national option)' defined in Recommendation Q.704. The value is 500 ms
(provisional value).";;
REGISTERED AS { mtpAttribute 79 };
q707-t1 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q707-t1Behaviour BEHAVIOUR DEFINED AS
"This attribute defines a timer value of timer T1 which is defined in
Recommendation Q.707.";;
REGISTERED AS { mtpAttribute 80 };
q707-t2 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR q707-t2Behaviour BEHAVIOUR DEFINED AS
"This attribute defines a timer value of timer T2 which is defined in
Recommendation Q.707.";;
REGISTERED AS { mtpAttribute 81 };
receiveCongestionThresholdAbatement ATTRIBUTE
WITH ATTRIBUTE SYNTAX
MTPDefinedTypesModule.ReceiveCongestionThresholdAbatement;
BEHAVIOUR receiveCongestionThresholdAbatementBehaviour BEHAVIOUR DEFINED AS
"If the number of MSUs in the reception buffer gets smaller than this
number, Level 2 flow control measures end. The value has to be smaller than
the respective congestion onset threshold.";;
REGISTERED AS { mtpAttribute 82 };
receiveCongestionThresholdOnset ATTRIBUTE
WITH ATTRIBUTE SYNTAX
MTPDefinedTypesModule.ReceiveCongestionThresholdOnset;
BEHAVIOUR receiveCongestionThresholdOnsetBehaviour BEHAVIOUR
DEFINED AS
"If the number of MSUs in the reception buffer gets bigger than this
value, Level 2 flow control measures begin. MSUs are still accepted.";;
REGISTERED AS { mtpAttribute 83 };
relatedLinkGroupNumber ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.RelatedLinkGroupNumber;
BEHAVIOUR relatedLinkGroupNumberBehaviour BEHAVIOUR DEFINED AS
"This attribute identifies the link group which the signalling link belongs to.";;
REGISTERED AS { mtpAttribute 84 };
remoteExchangeLabel ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.RemoteExchangeLabel;
MATCHES FOR EQUALITY;
BEHAVIOUR remoteExchangeLabelBehaviour BEHAVIOUR DEFINED AS
"This attribute specifies the remote exchange which contains the
mtpSignPoint with the point code equal to the signRouteSetNePartId.";;
REGISTERED AS { mtpAttribute 85 };
screeningByLinkSetOrByOpc ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.ScreeningByLinkSetOrByOpc;
BEHAVIOUR screeningByLinkSetOrByOpcBehaviour BEHAVIOUR DEFINED AS
"This attribute defines which of the different options of 8.2/Q.705 are used
for identifying unauthorized SS No. 7 messages.";;
REGISTERED AS { mtpAttribute 86 };
signDataLinkTpId ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.NameType;
MATCHES FOR EQUALITY;
BEHAVIOUR signDataLinkTpIdBehaviour BEHAVIOUR DEFINED AS
"This attribute is used for naming instances.";;
REGISTERED AS { mtpAttribute 87 };
signDataLinkTpList ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.PointerList;
MATCHES FOR EQUALITY;
BEHAVIOUR signDataLinkTpListBehaviour BEHAVIOUR DEFINED AS
"This attribute lists the signDataLink instances that can be used for
dynamical allocation to the signLinkTp.";;
REGISTERED AS { mtpAttribute 88 };
signDataLinkTpName ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.AdditionalName;
MATCHES FOR EQUALITY;
BEHAVIOUR signDataLinkTpNameBehaviour BEHAVIOUR DEFINED AS
"This attribute is an additional name for instances of the signDataLinkTp
managed object class. A set request is rejected if the name is already used
by another instance of the same class.";;
REGISTERED AS { mtpAttribute 89 };
signDataLinkTpPointer ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Pointer;
MATCHES FOR EQUALITY;
BEHAVIOUR signDataLinkTpPointerBehaviour BEHAVIOUR DEFINED AS
"This attribute references a particular signDataLinkTp instance. The
following restriction applies to this attribute: modification is only
allowed if the administrative state of the instance that contains this
attribute is 'locked'.";;
REGISTERED AS { mtpAttribute 90 };
signLinkSetTpId ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.NameType;
MATCHES FOR EQUALITY;
BEHAVIOUR signLinkSetTpIdBehaviour BEHAVIOUR DEFINED AS
"This attribute is used for naming instances.";;
REGISTERED AS { mtpAttribute 91 };
signLinkSetTpName ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.AdditionalName;
MATCHES FOR EQUALITY;
BEHAVIOUR signLinkSetTpNameBehaviour BEHAVIOUR DEFINED AS
"This attribute is an additional name for instances of the signLinkSetTp
managed object class. A set request is rejected if the name is already used
by another instance of the same class.";;
REGISTERED AS { mtpAttribute 92 };
signLinkSetTpPointer ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Pointer;
MATCHES FOR EQUALITY;
BEHAVIOUR signLinkSetTpPointerBehaviour BEHAVIOUR DEFINED AS
"References the signLinkSetTp which is intended to be used as first segment
of the succession of linksets, which form the signalling route on the network level.
If during creation of a signRouteNePart instance the value of this attribute
is referencing a signLinkSetTp instance, which is not created or is already
referenced by a signRouteNePart of the same signRouteSetNePart, then the
creation of the signRouteNePart is rejected and not carried out.
It is not allowed to reference a signLinksetTp, which is not contained in
the same mtpSignPoint as the signRouteSetNePart where the signRouteNePart is
contained in.";;
REGISTERED AS { mtpAttribute 93 };
signLinkTpName ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.AdditionalName;
MATCHES FOR EQUALITY;
BEHAVIOUR signLinkTpNameBehaviour BEHAVIOUR DEFINED AS
"This attribute is an additional name for instances of the signLinkTp
managed object class. A set request is rejected if the name is already used
by another instance of the same class.";;
REGISTERED AS { mtpAttribute 94 };
signRouteNePartId ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.NameType;
MATCHES FOR EQUALITY;
BEHAVIOUR signRouteNePartIdBehaviour BEHAVIOUR DEFINED AS
"This is the naming attribute of signRouteNePart. It identifies a
signRouteNePart instance within the signRouteSetNePart.";;
REGISTERED AS { mtpAttribute 96 };
signRouteNePartName ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.AdditionalName;
MATCHES FOR EQUALITY;
BEHAVIOUR signRouteNePartNameBehaviour BEHAVIOUR DEFINED AS
"This attribute is an additional name for instances of the signRouteNePart
managed object class. A set request is rejected if the name is already used
by another instance of the same class.";;
REGISTERED AS { mtpAttribute 97 };
signRouteSetNePartId ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.NameType;
MATCHES FOR EQUALITY;
BEHAVIOUR signRouteSetNePartIdBehaviour BEHAVIOUR DEFINED AS
"This is the naming attribute of signRouteSetNePart. It identifies a
signRouteSetNePart instance within the mtpSignPoint and equals the
signalling point code of the respective destination signalling point.";;
REGISTERED AS { mtpAttribute 98 };
signRouteSetNePartName ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.AdditionalName;
MATCHES FOR EQUALITY;
BEHAVIOUR signRouteSetNePartNameBehaviour BEHAVIOUR DEFINED AS
"Identifies a signRouteSetNePart instance within the managed object class;
its value is unique within the signRouteSetNePart object class. In this
attribute implementation or administration dependent information - like used
for naming schemes - can be stored. If at creation time the value of this
attribute given for the instance to be created already exists in another
signRouteNePart instance, then the creation is rejected and not carried out.";;
REGISTERED AS { mtpAttribute 99 };
signTermId ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.NameType;
MATCHES FOR EQUALITY;
BEHAVIOUR signTermIdBehaviour BEHAVIOUR DEFINED AS
"This attribute is used for naming instances.";;
REGISTERED AS { mtpAttribute 100 };
signTermList ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.PointerList;
BEHAVIOUR signTermListBehaviour BEHAVIOUR DEFINED AS
"This attribute lists the signTerm instances that can be used for dynamical
allocation to the signLinkTp.";;
REGISTERED AS { mtpAttribute 101 };
signTermName ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.AdditionalName;
MATCHES FOR EQUALITY;
BEHAVIOUR signTermNameBehaviour BEHAVIOUR DEFINED AS
"This attribute is an additional name for instances of the signTerm managed
object class. A set request is rejected if the name is already used by
another instance of the same class.";;
REGISTERED AS { mtpAttribute 102 };
signTermPointer ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Pointer;
MATCHES FOR EQUALITY;
BEHAVIOUR signTermPointerBehaviour BEHAVIOUR DEFINED AS
"This attribute identifies a particular signTerm instance.";;
REGISTERED AS { mtpAttribute 103 };
slCode ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.SlCode;
MATCHES FOR EQUALITY;
BEHAVIOUR slCodeBehaviour BEHAVIOUR DEFINED AS
"If one SLC has been assigned, it should be checked that this SLC will not
be assigned again.";;
REGISTERED AS { mtpAttribute 104 };
slsCodeCurrentList ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.SLSCodeCurrentList;
MATCHES FOR SET-INTERSECTION;
BEHAVIOUR slsCodeCurrentListBehaviour BEHAVIOUR DEFINED AS
"This attribute indicates, which SLSs are currently assigned to this
signLinkTp. It has to be ensured, that all SLSs are covered and no SLS
exists more than one time within the slsCodeCurrentList attributes of the
signLinkTp instances contained within one signLinkSetTp. The content of this
attribute can be different from that of the attribute slsCodeNormalList.
This attribute can be changed from system inside.";;
REGISTERED AS { mtpAttribute 105 };
slsCodeNormalList ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.SlsCodeNormalList;
MATCHES FOR SET-INTERSECTION;
BEHAVIOUR slsCodeNormalListBehaviour BEHAVIOUR DEFINED AS
"This attribute indicates, which SLSs are administratively assigned to this
signLinkTp for the case of normal operation.";;
REGISTERED AS { mtpAttribute 106 };
slsList ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.SlsCodeList;
BEHAVIOUR slsListBehaviour BEHAVIOUR DEFINED AS
"This attribute has to be used if loadsharing over link sets toward a
specific destination is done. It indicates which SLSs are assigned to this
signRouteNePart, in case it is a current route (i.e. the messages with these
SLSs are sent over the allocated link set).
It has to be ensured that all SLSs are covered and no SLS exists more than
one time within the slsList attributes of the current routes.
The attribute can be written from system inside.";;
REGISTERED AS { mtpAttribute 107 };
slTimersProfileId ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.NameType;
MATCHES FOR EQUALITY;
BEHAVIOUR slTimersProfileIdBehaviour BEHAVIOUR DEFINED AS
"This attribute is used for naming instances.";;
REGISTERED AS { mtpAttribute 108 };
slTimersProfileName ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.AdditionalName;
MATCHES FOR EQUALITY;
BEHAVIOUR slTimersProfileNameBehaviour BEHAVIOUR DEFINED AS
"This attribute is an additional name for instances of the slTimersProfile
managed object class. A set request is rejected if the name is already used
by another instance of the same class.";;
REGISTERED AS { mtpAttribute 109 };
slTimersProfilePointer ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Pointer;
MATCHES FOR EQUALITY;
BEHAVIOUR slTimersProfilePointerBehaviour BEHAVIOUR DEFINED AS
"This attribute points to the instance of the class slTimersProfile,
containing the Q.704 timers for the signalling link.";;
REGISTERED AS { mtpAttribute 110 };
spTimersProfileId ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.NameType;
MATCHES FOR EQUALITY;
BEHAVIOUR spTimersProfileIdBehaviour BEHAVIOUR DEFINED AS
"This attribute is used for naming instances.";;
REGISTERED AS { mtpAttribute 111 };
spTimersProfileName ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.AdditionalName;
MATCHES FOR EQUALITY;
BEHAVIOUR spTimersProfileNameBehaviour BEHAVIOUR DEFINED AS
"This attribute is an additional name for instances of the spTimersProfile
managed object class. A set request is rejected if the name is already used
by another instance of the same class.";;
REGISTERED AS { mtpAttribute 112 };
spTimersProfilePointer ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Pointer;
MATCHES FOR EQUALITY;
BEHAVIOUR spTimersProfilePointerBehaviour BEHAVIOUR DEFINED AS
"This attribute points to the instance of the class spTimersProfile,
containing the Q.704 and Q.707 timers for the signalling point.";;
REGISTERED AS { mtpAttribute 113 };
spType ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.SpType;
MATCHES FOR EQUALITY;
BEHAVIOUR spTypeBehaviour BEHAVIOUR DEFINED AS
"This attribute represents the SP-type: SEP, STEP or STP.";;
REGISTERED AS { mtpAttribute 114 };
stmChannel ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.StmChannel;
MATCHES FOR EQUALITY;
BEHAVIOUR stmChannelBehaviour BEHAVIOUR DEFINED AS
"This attribute denotes the STM channel which defines the signalling
datalink on the PCM transmission system.";;
REGISTERED AS { mtpAttribute 115 };
stpScreeningTableListMode ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.StpScreeningTableListMode;
BEHAVIOUR stpScreeningTableListModeBehaviour BEHAVIOUR DEFINED AS
"The stpScreeningTableListMode attribute indicates whether the STP access is
allowed or not by the designated combinations contained in the subordinate
stpScreeningTableLine's (see 8.2/Q.705).
TRUE: STP access allowed
FALSE: STP access inhibited.";;
REGISTERED AS { mtpAttribute 116 };
stpScreeningTableId ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.NameType;
MATCHES FOR EQUALITY;
BEHAVIOUR stpScreeningTableIdBehaviour BEHAVIOUR DEFINED AS
"The STP Screening Table Id is an attribute used for naming purposes.";;
REGISTERED AS { mtpAttribute 117 };
stpScreeningTableLineContent ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.StpScreeningTableLineContent;
BEHAVIOUR stpScreeningTableLineContentBehaviour BEHAVIOUR DEFINED AS
"The stpScreeningTableLineContent attribute represents the content of one
line of the STP ScreeningTable. The content consists of elements indicating
the designated DPCs which are to be screened in combination with the OPC or
linkset given by the stpScreeningTableLineId and an indication how a message
fulfilling such a combination is to be treated.";;
REGISTERED AS { mtpAttribute 118 };
stpScreeningTableLineId ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.StpScreeningTableLineId;
MATCHES FOR EQUALITY;
BEHAVIOUR stpScreeningTableLineIdBehaviour BEHAVIOUR DEFINED AS
"The stpScreeningTableLineId is an attribute used for naming purposes.
Depending on the value of attribute screeningByLinkSetOrByOpc of the
superior stpScreeningTable instance it represents the OPC or linkset which
is designated to be screened for STP traffic.";;
REGISTERED AS { mtpAttribute 119 };
stpScreeningTableLineName ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.AdditionalName;
MATCHES FOR EQUALITY;
BEHAVIOUR stpScreeningTableLineNameBehaviour BEHAVIOUR DEFINED AS
"This attribute is an additional name for instances of the
stpScreeningTableLine managed object class. A set request is rejected if the
name is already used by another instance of the same class.";;
REGISTERED AS { mtpAttribute 120 };
stpScreeningTableName ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.AdditionalName;
MATCHES FOR EQUALITY;
BEHAVIOUR stpScreeningTableNameBehaviour BEHAVIOUR DEFINED AS
"This attribute is an additional name for instances of the stpScreeningTable
managed object class. A set request is rejected if the name is already used
by another instance of the same class.";;
REGISTERED AS { mtpAttribute 121 };
timerTx ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
MATCHES FOR EQUALITY;
BEHAVIOUR timerTxBehaviour BEHAVIOUR DEFINED AS
"This attribute identifies the Tx timer value for the 'multiple link
congestion states without congestion priority' mechanism as described in
3.8.2.3/Q.704.";;
REGISTERED AS { mtpAttribute 122 };
timerTy ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimerValue;
BEHAVIOUR timerTyBehaviour BEHAVIOUR DEFINED AS
"This attribute identifies the Ty timer value for the 'multiple link
congestion states without congestion priority' mechanism as described in
3.8.2.3/Q.704.";;
REGISTERED AS { mtpAttribute 123 };
transmissionCongestionThresholdAbatementLevel1 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.
TransmissionCongestionThresholdAbatementLevel1;
BEHAVIOUR transmissionCongestionThresholdAbatementLevel1Behaviour BEHAVIOUR
DEFINED AS
"If the number of MSUs in the transmission / retransmission buffer gets
smaller than this number, Level 2 flow control measures end. The value has
to be smaller than the respective congestion onset threshold.";;
REGISTERED AS { mtpAttribute 124 };
transmissionCongestionThresholdAbatementLevel2 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.
TransmissionCongestionThresholdAbatementLevel2;
BEHAVIOUR transmissionCongestionThresholdAbatementLevel2Behaviour BEHAVIOUR
DEFINED AS
"If the number of MSUs in the transm./retransm. buffer of a link in the
congestionLevel 2 gets smaller than this number, the resp. link is not any
more in congestionLevel 2. CongestionLevel 2 measures end. The value has
to be smaller than the respective congestion onset threshold.";;
REGISTERED AS { mtpAttribute 125 };
transmissionCongestionThresholdAbatementLevel3 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.
TransmissionCongestionThresholdAbatementLevel3;
BEHAVIOUR transmissionCongestionThresholdAbatementLevel3Behaviour BEHAVIOUR
DEFINED AS
"If the number of MSUs in the transm./retransm. buffer of a link in the
congestionLevel 3 gets smaller than this number, the resp. link is not any
more in congestionLevel 3. CongestionLevel 3 measures end. The value has
to be smaller than the respective congestion onset threshold.";;
REGISTERED AS { mtpAttribute 126 };
transmissionCongestionThresholdDiscardLevel1 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.
TransmissionCongestionThresholdDiscardLevel1;
BEHAVIOUR transmissionCongestionThresholdDiscardLevel1Behaviour BEHAVIOUR
DEFINED AS
"If the number of MSUs in the transmission / retransmission buffer of a
link in the congestion level 1 gets bigger than this number, MSUs are
discarded (this threshold equals the respective buffer size). The value
has to be bigger than the respective congestion onset threshold.";;
REGISTERED AS { mtpAttribute 127 };
transmissionCongestionThresholdDiscardLevel2 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.
TransmissionCongestionThresholdDiscardLevel2;
BEHAVIOUR transmissionCongestionThresholdDiscardLevel2Behaviour BEHAVIOUR
DEFINED AS
"If the number of MSUs in the transm./retransm. buffer of a link in the
congestion level 2 gets bigger than this number, MSUs are discarded (this
threshold equals the respective buffer size). The value has to be bigger
than the respective congestion onset threshold.";;
REGISTERED AS { mtpAttribute 128 };
transmissionCongestionThresholdDiscardLevel3 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.
TransmissionCongestionThresholdDiscardLevel3;
BEHAVIOUR transmissionCongestionThresholdDiscardLevel3Behaviour BEHAVIOUR
DEFINED AS
"If the number of MSUs in the transmission / retransmission buffer of a
link in the congestion level 3 gets bigger than this number, MSUs are
discarded (this threshold equals the respective buffer size). The value
has to be bigger than the respective congestion onset threshold.";;
REGISTERED AS { mtpAttribute 129 };
transmissionCongestionThresholdOnsetLevel1 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.
TransmissionCongestionThresholdOnsetLevel1;
BEHAVIOUR transmissionCongestionThresholdOnsetLevel1Behaviour BEHAVIOUR
DEFINED AS
"If the number of MSUs in the transmission / retransmission buffer gets
bigger than this value, the respective link is congested in
congestionLevel 1. CongestionLevel 1 measures start.";;
REGISTERED AS { mtpAttribute 130 };
transmissionCongestionThresholdOnsetLevel2 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.
TransmissionCongestionThresholdOnsetLevel2;
BEHAVIOUR transmissionCongestionThresholdOnsetLevel2Behaviour BEHAVIOUR
DEFINED AS
"If the number of MSUs in the transmission / retransmission buffer gets
bigger than this value, the respective link is congested in
congestionLevel 2. CongestionLevel 2 measures start.";;
REGISTERED AS { mtpAttribute 131 };
transmissionCongestionThresholdOnsetLevel3 ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.
TransmissionCongestionThresholdOnsetLevel3;
BEHAVIOUR transmissionCongestionThresholdOnsetLevel3Behaviour BEHAVIOUR
DEFINED AS
"If the number of MSUs in the transmission / retransmission buffer gets
bigger than this value, the respective link is congested in
congestionLevel 3. CongestionLevel 3 measures start.";;
REGISTERED AS { mtpAttribute 132 };
transmissionRate ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TransmissionRate;
MATCHES FOR EQUALITY;
BEHAVIOUR transmissionRateBehaviour BEHAVIOUR DEFINED AS
"This attribute represents the transmissionRate and implies the
transmissionType (i.e. 56 and 64 kbits imply digital, 4.8 kbits implies
analog transmission).";;
REGISTERED AS { mtpAttribute 133 };
treatmentOfOutsideRanges ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TreatmentOf;
BEHAVIOUR treatmentOfOutsideRangesBehaviour BEHAVIOUR DEFINED AS
"The treatmentOfOutsideRanges attribute specifies the treatment of the
messages outside the designated ranges given the stpScreeningTable managed
object (see 8.3/Q.705, part two).
normal : allow all STP messages outside the designated ranges discard :
discard all STP messages outside the designated ranges.";;
REGISTERED AS { mtpAttribute 134 };
getScreenedOpcsOrLinkSetsByDpc ACTION
BEHAVIOUR getScreenedOpcsOrLinkSetsByDpcBehaviour BEHAVIOUR DEFINED AS
"This action gets all OPCs or linksets (depending on the value of the
screeningByLinkSetOrByOpc attribute) together with their respective
messageTreatments which are screened in combination with a specific DPC
within all the stpScreeningTableLineContents of all stpScreeningTableLine's
contained in the stpScreeningTable.
The resulting list in the reply is empty, if no OPC or Linkset within all
the stpScreeningTableLine (Contents of all stpScreeningTableLine's contained
in the stpScreeningTable is screened in combination with the DPC - given in
the information syntax), or if no stpScreeningTableLine contained in the
stpScreeningTable does exist.";;
MODE CONFIRMED;
WITH INFORMATION SYNTAX MTPDefinedTypesModule.SpecificDpc;
WITH REPLY SYNTAX MTPDefinedTypesModule.ScreenedOpcsOrLinkSetsList;
REGISTERED AS { mtpAction 1 };
localInhibit ACTION
BEHAVIOUR localInhibitBehaviour BEHAVIOUR DEFINED AS
"This action inhibits the signalling link termination point. If the
inhibition procedure completes successfully the linkTpStatus contains
localInhibit. This action is not performed if the linkTpStatus contains
localInhibit.";;
MODE CONFIRMED;
WITH REPLY SYNTAX MTPDefinedTypesModule.ResultOfAction;
REGISTERED AS { mtpAction 2 };
localUninhibit ACTION
BEHAVIOUR localUninhibitBehaviour BEHAVIOUR DEFINED AS
"This action uninhibits the signalling link termination point. If the
uninhibition procedure completes successfully the localInhibit is removed
from linkTpStatus. This action is not performed if the linkTpStatus does not
contain localInhibit.";;
MODE CONFIRMED;
WITH REPLY SYNTAX MTPDefinedTypesModule.ResultOfAction;
REGISTERED AS { mtpAction 3 };
signLinkTest ACTION
BEHAVIOUR signLinkTestBehaviour BEHAVIOUR DEFINED AS
"This test is performed to analyse the signalling link.";;
WITH REPLY SYNTAX MTPDefinedTypesModule.ResultOfAction;
REGISTERED AS { mtpAction 5 };
mtpRestarting NOTIFICATION
WITH INFORMATION SYNTAX MTPDefinedTypesModule.MtpRestarting;
REGISTERED AS { mtpNotification 1 };
ss7OnOccEvent NOTIFICATION
BEHAVIOUR ss7OnOccEventBhv BEHAVIOUR DEFINED AS
"This notification is used to report the Q.752 on-occurrence measurement
results and other MTP events, which are not reported as a communication alarm.";;
WITH INFORMATION SYNTAX MTPDefinedTypesModule.SS7OnOccEventInfo;
REGISTERED AS { mtpNotification 2 };
managedElement-managedSwitchingElement NAME BINDING
SUBORDINATE OBJECT CLASS managedSwitchingElement;
NAMED BY
SUPERIOR OBJECT CLASS "ITU-T Rec. M.3100 (1992)":managedElement;
WITH ATTRIBUTE "ITU-T Rec. M.3100 (1992)":managedElementId;
BEHAVIOUR managedElement-managedSwitchingElementBehaviour BEHAVIOUR DEFINED AS
"If the managedSwitchingElementName package is supported: a create request
with a value for the name attribute that is already used by another instance
of the same object class will be rejected.";;
CREATE;
DELETE;
REGISTERED AS { mtpNameBinding 39 };
managedSwitchingElement-mtpSignPoint NAME BINDING
SUBORDINATE OBJECT CLASS mtpSignPoint;
NAMED BY
SUPERIOR OBJECT CLASS managedSwitchingElement;
WITH ATTRIBUTE mtpSignPointId;
BEHAVIOUR managedSwitchingElement-mtpSignPointBehaviour BEHAVIOUR DEFINED AS
"An mtpSignPoint can be created by an operator or automatically.
In case the spTimersProfilePointerPackage is used, a create or set request
is rejected, if
i) the spTimersProfilePointer does not reference an spTimersProfile
OR ii) the spTimersProfilePointer would reference an instance which does not exist
If the name package is supported: a create request with a value for the
name attribute that is already used by another instance of the same object
class will be rejected.
An mtpSignPoint can be deleted if and only if it does not contain any
other managed object class instances, except for contained measurements.";;
CREATE;
DELETE ONLY-IF-NO-CONTAINED-OBJECTS;
REGISTERED AS { mtpNameBinding 1 };
mtpSignPoint-signRouteSetNePart NAME BINDING
SUBORDINATE OBJECT CLASS signRouteSetNePart;
NAMED BY
SUPERIOR OBJECT CLASS mtpSignPoint;
WITH ATTRIBUTE signRouteSetNePartId;
BEHAVIOUR mtpSignPoint-signRouteSetNePartBehaviour BEHAVIOUR DEFINED AS
"If the name package is supported: a create request with a value for the
name attribute that is already used by another instance of the same object
class will be rejected.
A delete request is rejected, if the administrativeState of the
signRouteSetNePart does not equal locked.";;
CREATE;
DELETE ONLY-IF-NO-CONTAINED-OBJECTS;
REGISTERED AS { mtpNameBinding 2 };
signRouteSetNePart-signRouteNePart NAME BINDING
SUBORDINATE OBJECT CLASS signRouteNePart;
NAMED BY
SUPERIOR OBJECT CLASS signRouteSetNePart;
WITH ATTRIBUTE signRouteNePartId;
BEHAVIOUR signRouteSetNePart-signRouteNePartBehaviour BEHAVIOUR DEFINED AS
"A create request is rejected, if the signlinkSetTpPointer would reference
an instance, which
i) does not belong to the signLinkSetTp object class
OR ii) does not exist OR iii) is not contained in the same mtpSignPoint as
the signRouteNePart OR iv) is already referenced by a signRouteNePart
contained within the same signRouteSetNePart
A delete request is rejected if its administrativeState does not equal locked.
If the name package is supported: a create request with a value for the name
attribute that is already used by another instance of the same object class
will be rejected.";;
CREATE;
DELETE;
REGISTERED AS { mtpNameBinding 3 };
signLinkSetTp-signLinkTp NAME BINDING
SUBORDINATE OBJECT CLASS signLinkTp;
NAMED BY
SUPERIOR OBJECT CLASS signLinkSetTp;
WITH ATTRIBUTE slCode;
BEHAVIOUR signLinkSetTp-signLinkTpBehaviour BEHAVIOUR DEFINED AS
"If the name package is supported: a create request with a value for the
name attribute that is already used by another instance of the same object
class will be rejected.";;
CREATE;
DELETE;
REGISTERED AS { mtpNameBinding 4 };
mtpSignPoint-mtpAccessPoint NAME BINDING
SUBORDINATE OBJECT CLASS mtpAccessPoint;
NAMED BY
SUPERIOR OBJECT CLASS mtpSignPoint;
WITH ATTRIBUTE "ITU-T Rec. X.723 (1993) | ISO/IEC 10165-5 : 1993":sapId;
BEHAVIOUR mtpSignPoint-mtpAccessPointBehaviour BEHAVIOUR DEFINED AS
"If the name package is supported: a create request with a value for the
name attribute that is already used by another instance of the same object
class will be rejected.";;
CREATE;
DELETE;
REGISTERED AS { mtpNameBinding 5 };
mtpSignPoint-mtpLevel3 NAME BINDING
SUBORDINATE OBJECT CLASS mtpLevel3;
NAMED BY
SUPERIOR OBJECT CLASS mtpSignPoint;
WITH ATTRIBUTE mtpLevel3Id;
BEHAVIOUR mtpSignPoint-mtpLevel3Behaviour BEHAVIOUR DEFINED AS
"If the name package is supported: a create request with a value for the
name attribute that is already used by another instance of the same object
class will be rejected.";;
CREATE;
DELETE ONLY-IF-NO-CONTAINED-OBJECTS;
REGISTERED AS { mtpNameBinding 6 };
mtpSignPoint-signDataLinkTp NAME BINDING
SUBORDINATE OBJECT CLASS signDataLinkTp;
NAMED BY
SUPERIOR OBJECT CLASS mtpSignPoint;
WITH ATTRIBUTE signDataLinkTpId;
BEHAVIOUR mtpSignPoint-signDataLinkTpBehaviour BEHAVIOUR DEFINED AS
"A create request is rejected if the equipmentPointer would reference
equipment that does not exist.
If the name package is supported: a create request with a value for the name
attribute that is already used by another instance of the same object class
will be rejected.";;
CREATE;
DELETE;
REGISTERED AS { mtpNameBinding 7 };
mtpSignPoint-signLinkSetTp NAME BINDING
SUBORDINATE OBJECT CLASS signLinkSetTp;
NAMED BY
SUPERIOR OBJECT CLASS mtpSignPoint;
WITH ATTRIBUTE signLinkSetTpId;
BEHAVIOUR mtpSignPoint-signLinkSetTpBehaviour BEHAVIOUR DEFINED AS
"A creation request is only successful if a signRouteSetNePart exists within
the mtpSignPoint for the value of attribute adjPC
In case the lsTimersProfilePointerPackage is used, create or set request is
rejected, if
i) the lsTimersProfilePointer does not reference an lsTimersProfile
OR ii) the lsTimersProfilePointer would reference an instance which does not exist
If the name package is supported: a create request with a value for the name
attribute that is already used by another instance of the same object class
will be rejected.
If it is tried to delete a signLinkSetTp, which is referenced by at least
one signRouteNePart, the deletion of the signLinkSetTp is rejected and not
carried out.";;
CREATE;
DELETE ONLY-IF-NO-CONTAINED-OBJECTS;
REGISTERED AS { mtpNameBinding 8 };
managedSwitchingElement-signTerm NAME BINDING
SUBORDINATE OBJECT CLASS signTerm;
NAMED BY
SUPERIOR OBJECT CLASS managedSwitchingElement;
WITH ATTRIBUTE signTermId;
BEHAVIOUR managedSwitchingElement-signTermBehaviour BEHAVIOUR DEFINED AS
"A create request is rejected if the equipmentPointer would reference
equipment that does not exist.
If the name package is supported: a create request with a value for the name
attribute that is already used by another instance of the same object class
will be rejected.";;
CREATE;
DELETE;
REGISTERED AS { mtpNameBinding 9 };
mtpSignPoint-stpScreeningTable NAME BINDING
SUBORDINATE OBJECT CLASS stpScreeningTable;
NAMED BY
SUPERIOR OBJECT CLASS mtpSignPoint;
WITH ATTRIBUTE stpScreeningTableId;
BEHAVIOUR mtpSignPoint-stpScreeningTableBehaviour BEHAVIOUR DEFINED AS
"If the name package is supported: a create request with a value for the
name attribute that is already used by another instance of the same object
class will be rejected.
It is only allowed to delete an instance of this object class if its
administrative state equals 'locked'.";;
CREATE;
DELETE;
REGISTERED AS { mtpNameBinding 10 };
managedSwitchingElement-lsTimersProfile NAME BINDING
SUBORDINATE OBJECT CLASS lsTimersProfile;
NAMED BY
SUPERIOR OBJECT CLASS managedSwitchingElement;
WITH ATTRIBUTE lsTimersProfileId;
BEHAVIOUR managedSwitchingElement-lsTimersProfileBehaviour BEHAVIOUR DEFINED AS
"If the name package is supported: a create request with a value for the
name attribute that is already used by another instance of the same object
class will be rejected.
If an attempt is made to delete an lsTimersProfile which is still referenced
by a signLinkSetTp the delete request will be rejected.";;
CREATE;
DELETE;
REGISTERED AS { mtpNameBinding 11 };
managedSwitchingElement-mtpL2ProtocolProfile NAME BINDING
SUBORDINATE OBJECT CLASS mtpL2ProtocolProfile;
NAMED BY
SUPERIOR OBJECT CLASS managedSwitchingElement;
WITH ATTRIBUTE mtpL2ProtocolProfileId;
BEHAVIOUR managedSwitchingElement-mtpL2ProtocolProfileBehaviour BEHAVIOUR DEFINED AS
"If the name package is supported: a create request with a value for the
name attribute that is already used by another instance of the same object
class will be rejected.
If an attempt is made to delete an mtpL2ProtocolProfile which is still
referenced by a signLinkTP the delete request will be rejected.";;
CREATE;
DELETE;
REGISTERED AS { mtpNameBinding 12 };
managedSwitchingElement-slTimersProfile NAME BINDING
SUBORDINATE OBJECT CLASS slTimersProfile;
NAMED BY
SUPERIOR OBJECT CLASS managedSwitchingElement;
WITH ATTRIBUTE slTimersProfileId;
BEHAVIOUR managedSwitchingElement-slTimersProfileBehaviour BEHAVIOUR DEFINED AS
"If the name package is supported: a create request with a value for the
name attribute that is already used by another instance of the same object
class will be rejected.
If an attempt is made to delete an slTimersProfile which is still referenced
by a signLinkTp the delete request will be rejected.";;
CREATE;
DELETE;
REGISTERED AS { mtpNameBinding 13 };
managedSwitchingElement-spTimersProfile NAME BINDING
SUBORDINATE OBJECT CLASS spTimersProfile;
NAMED BY
SUPERIOR OBJECT CLASS managedSwitchingElement;
WITH ATTRIBUTE spTimersProfileId;
BEHAVIOUR managedSwitchingElement-spTimersProfileBehaviour BEHAVIOUR DEFINED AS
"If the name package is supported: a create request with a value for the
name attribute that is already used by another instance of the same object
class will be rejected.
If an attempt is made to delete an spTimersProfile which is still referenced
by an mtpSignPoint the delete request will be rejected.";;
CREATE;
DELETE;
REGISTERED AS { mtpNameBinding 14 };
stpScreeningTable-stpScreeningTableLine NAME BINDING
SUBORDINATE OBJECT CLASS stpScreeningTableLine;
NAMED BY
SUPERIOR OBJECT CLASS stpScreeningTable;
WITH ATTRIBUTE stpScreeningTableLineId;
BEHAVIOUR stpScreeningTable-stpScreeningTableLineBehaviour BEHAVIOUR DEFINED AS
"If the name package is supported: a create request with a value for the
name attribute that is already used by another instance of the same object
class will be rejected. The total number of screened DPC's across all
stpScreeningTableLine instances contained by an stpScreeningTable must be
less or equal to maxNoOfScreenedDpcs. A respectively unallowed create
request is rejected. If one tries to create an instance with an
stpScreeningTableLineId which would represent a linkset which is not
contained within the same signPoint as the stpScreeningTable, the create
request is rejected. Instances of this object class can be deleted
automatically if the superior stpScreeningTable is deleted.";;
CREATE;
DELETE;
REGISTERED AS { mtpNameBinding 15 };
-- The syntax of this ASN.1 is based on Recommendation X.208. However, from
-- Recommendation X.680, the "ellipsis notation" is used.
all30MinSignallingLinkDurationData MANAGED OBJECT CLASS
DERIVED FROM oblSignallingLinkDurationData;
CHARACTERIZED BY all30MinSignallingLinkDurationDataPackage PACKAGE
BEHAVIOUR all30MinSignallingLinkDurationDataBehaviour BEHAVIOUR DEFINED AS
"This managed object class contains all signalling link duration data with
granularityPeriod 30 minutes. The attributes are read-only.";;
ATTRIBUTES
slLocalInhibition GET SET-BY-CREATE, -- Measurement Q.752/2.5
slRemoteInhibition GET SET-BY-CREATE, -- Measurement Q.752/2.6
slFailed GET SET-BY-CREATE, -- Measurement Q.752/2.7
slRemoteProcOutage GET SET-BY-CREATE;;; -- Measurement Q.752/2.9
REGISTERED AS { mtpObjectClass 17 };
all5And30MinSignallingLinkDurationData MANAGED OBJECT CLASS
DERIVED FROM ss7CurrentData;
CHARACTERIZED BY all5And30MinSignallingLinkDurationDataPackage PACKAGE
BEHAVIOUR all5And30MinSignallingLinkDurationDataBehaviour BEHAVIOUR DEFINED AS
"This managed object class contains all signalling link duration data with
preferred granularityPeriod 5 and 30 minutes. The attributes are read-only.";;
ATTRIBUTES
localMgntInhibit GET SET-BY-CREATE, -- Measurement Q.752/2.13
localMgntUninhibit GET SET-BY-CREATE, -- Measurement Q.752/2.14
localBusy GET SET-BY-CREATE;;; -- Measurement Q.752/2.15
REGISTERED AS { mtpObjectClass 18 };
allSignallingLinkUtilizationData MANAGED OBJECT CLASS
DERIVED FROM oblSignallingLinkUtilizationData;
CHARACTERIZED BY allSignallingLinkUtilizationDataPackage PACKAGE
BEHAVIOUR allSignallingLinkUtilizationDataBehaviour BEHAVIOUR DEFINED AS
"This managed object class contains all signalling link utilization data.
The preferred granularityPeriods are 5 and 30 minutes. The attributes are
read-only.";;
ATTRIBUTES
slAlignment GET SET-BY-CREATE, -- Measurement Q.752/1.7
negAckReceived GET SET-BY-CREATE, -- Measurement Q.752/1.9
retransmittedOctets GET SET-BY-CREATE, -- Measurement Q.752/3.2
transmittedMSUs GET SET-BY-CREATE, -- Measurement Q.752/3.3
receivedMSUs GET SET-BY-CREATE;;; -- Measurement Q.752/3.5
CONDITIONAL PACKAGES
localChangeOversPackage
PRESENT IF "the granularity period is 30 minutes";
REGISTERED AS { mtpObjectClass 19 };
allSignallingPointUtilizationData MANAGED OBJECT CLASS
DERIVED FROM oblSignallingPointUtilizationData;
CHARACTERIZED BY allSignallingPointUtilizationDataPackage PACKAGE
BEHAVIOUR allSignallingPointUtilizationDataBehaviour BEHAVIOUR DEFINED AS
"This managed object class contains all signalling point utilization data.
The preferred granularityPeriods are 5 or 30 minutes. The attributes are
read-only.";;
ATTRIBUTES
adjacentInaccessibleEvents GET SET-BY-CREATE;;; -- Measurement Q.752/5.1
--Modelling of Measurement Q.752/5.1 is for further study
REGISTERED AS { mtpObjectClass 20 };
handledMSUsOpcDpcSioMeasurement MANAGED OBJECT CLASS
DERIVED FROM ss7CurrentData;
CHARACTERIZED BY handledMSUsOpcDpcSioMeasurementPackage PACKAGE
BEHAVIOUR handledMSUsOpcDpcSioMeasurementBehaviour BEHAVIOUR DEFINED AS
"This managed object class starts a measurement for a specific OPC/DPC/SIO
combination. The preferred granularityPeriods are 5 and 30 minutes.
Activation of these measurements should be limited to a small number of
OPC/DPC combinations at a given time. The measurement attribute is read-only.";;
ATTRIBUTES
opc GET SET-BY-CREATE,
dpc GET SET-BY-CREATE,
sio GET SET-BY-CREATE,
handledMSUsOpcDpcSio GET SET-BY-CREATE;;; -- Measurement Q.752/6.7
REGISTERED AS { mtpObjectClass 21 };
handledOctetsOpcDpcSioMeasurement MANAGED OBJECT CLASS
DERIVED FROM ss7CurrentData;
CHARACTERIZED BY handledOctetsOpcDpcSioMeasurementPackage PACKAGE
BEHAVIOUR handledOctetsOpcDpcSioMeasurementBehaviour BEHAVIOUR DEFINED AS
"This managed object class starts a measurement for a specific OPC/DPC/SIO
combination. The preferred granularityPeriods are 5 and 30 minutes.
Activation of these measurements should be limited to a small number of
OPC/DPC combinations at a given time. The attribute is read-only.";;
ATTRIBUTES
opc GET SET-BY-CREATE,
dpc GET SET-BY-CREATE,
sio GET SET-BY-CREATE,
handledOctetsOpcDpcSio GET SET-BY-CREATE;;; -- Measurement Q.752/6.6
REGISTERED AS { mtpObjectClass 22 };
handledOctetsSIOMeasurement MANAGED OBJECT CLASS
DERIVED FROM ss7CurrentData;
CHARACTERIZED BY handledOctetsSIOMeasurementPackage PACKAGE
BEHAVIOUR handledOctetsSIOMeasurementBehaviour BEHAVIOUR DEFINED AS
"This managed object class starts a measurement for a specific SIO. The
preferred granularityPeriods are 5 and 30 minutes. The attribute is read-only.";;
ATTRIBUTES
sio GET SET-BY-CREATE,
handledOctetsSIO GET SET-BY-CREATE;;; -- Measurement Q.752/6.3
REGISTERED AS { mtpObjectClass 23 };
oblSignallingLinkDurationData MANAGED OBJECT CLASS
DERIVED FROM ss7CurrentData;
CHARACTERIZED BY oblSignallingLinkDurationDataPackage PACKAGE
BEHAVIOUR oblSignallingLinkDurationDataBehaviour BEHAVIOUR DEFINED AS
"This managed object class contains the obligatory signalling link
duration data. The preferred granularityPeriod is 30 minutes. The
attributes are read-only.";;
ATTRIBUTES
slUnavailabilityDuration GET SET-BY-CREATE, -- Measurement Q.752/2.1
slInServiceDuration GET SET-BY-CREATE;;; -- Measurement Q.752/1.1
REGISTERED AS { mtpObjectClass 24 };
oblSignallingLinkUtilizationData MANAGED OBJECT CLASS
DERIVED FROM ss7CurrentData;
CHARACTERIZED BY oblSignallingLinkUtilizationDataPackage PACKAGE
BEHAVIOUR oblSignallingLinkUtilizationDataBehaviour BEHAVIOUR DEFINED AS
"This managed object class contains all obligatory signalling link
utilization data. The granularityPeriod is 30 minutes. The attributes are
read-only.";;
ATTRIBUTES
signUnitsReceived GET SET-BY-CREATE, -- Measurement Q.752/1.8
transmittedOctetsSIFSIO GET SET-BY-CREATE, -- Measurement Q.752/3.1
receivedOctetsSIFSIO GET SET-BY-CREATE, -- Measurement Q.752/3.4
discardedMSUs GET SET-BY-CREATE;;; -- Measurement Q.752/3.10
REGISTERED AS { mtpObjectClass 25 };
oblSignallingPointUtilizationData MANAGED OBJECT CLASS
DERIVED FROM ss7CurrentData;
CHARACTERIZED BY oblSignallingPointUtilizationDataPackage PACKAGE
BEHAVIOUR oblSignallingPointUtilizationDataBehaviour BEHAVIOUR DEFINED AS
"This managed object class contains all obligatory signalling point
utilization data. The
preferred granularityPeriods are 5 minutes. The attributes are read-only.";;
ATTRIBUTES
adjacentInaccessibleDuration GET SET-BY-CREATE;;; -- Measurement Q.752/5.2
REGISTERED AS { mtpObjectClass 26 };
receivedOctetsOPCMeasurement MANAGED OBJECT CLASS
DERIVED FROM ss7CurrentData;
CHARACTERIZED BY receivedOctetsOPCMeasurementPackage PACKAGE
BEHAVIOUR receivedOctetsOPCMeasurementBehaviour BEHAVIOUR DEFINED AS
"This managed object class starts a measurement for a specific OPC. The
preferred granularityPeriods are 5 and 30 minutes. Activation of these
measurements should be limited to a small number of signalling point codes
at a given time. The attribute is read-only.";;
ATTRIBUTES
opc GET SET-BY-CREATE,
receivedOctetsOPC GET SET-BY-CREATE;;; -- Measurement Q.752/6.1
REGISTERED AS { mtpObjectClass 27 };
receivedOctetsOpcSioMeasurement MANAGED OBJECT CLASS
DERIVED FROM ss7CurrentData;
CHARACTERIZED BY receivedOctetsOpcSioMeasurementPackage PACKAGE
BEHAVIOUR receivedOctetsOpcSioMeasurementBehaviour BEHAVIOUR DEFINED AS
"This managed object class starts a measurement for a specific OPC/SIO
combination. The preferred granularityPeriods are 5 and 30 minutes.
Activation of these measurements should be limited to a small number of
signalling point codes at a given time. The attribute is read-only.";;
ATTRIBUTES
opc GET SET-BY-CREATE,
sio GET SET-BY-CREATE,
receivedOctetsOpcSio GET SET-BY-CREATE;;; -- Measurement Q.752/6.4
REGISTERED AS { mtpObjectClass 28 };
routeSetInformationData MANAGED OBJECT CLASS
DERIVED FROM ss7CurrentData;
CHARACTERIZED BY routeSetInformationDataPackage PACKAGE
BEHAVIOUR routeSetInformationDataBehaviour BEHAVIOUR DEFINED AS
"This managed object class contains all permanent signalling point
duration data. The granularityPeriod is 30 minutes. The attributes are
read-only.";;
ATTRIBUTES
routeSetUnavailable GET SET-BY-CREATE, -- Measurement Q.752/4.9
routeSetUnavailableDuration GET SET-BY-CREATE;;; -- Measurement Q.752/4.10
REGISTERED AS { mtpObjectClass 29 };
signallingLinkCongestionData MANAGED OBJECT CLASS
DERIVED FROM ss7FirstAndIntervalCurrentData;
CHARACTERIZED BY signallingLinkCongestionDataPackage PACKAGE
BEHAVIOUR signallingLinkCongestionDataBehaviour BEHAVIOUR DEFINED AS
"This managed object class contains the optional signalling link
congestion data. The preferred granularityPeriods are 5 and 30 minutes.
The attributes slCongestedStarts, slCongestionStops and
congestionEventsMSULoss can be referenced from an instance of
ss7FirstAndIntervalThresholdData when they are used for a first and
interval measurement. The attributes are read-only.";;
ATTRIBUTES
slCongestedStarts GET SET-BY-CREATE, -- Measurement Q.752/3.6 Modelling of
-- Measurement Q.752/3.6 is for further study
slCongestionStops GET SET-BY-CREATE, -- Measurement Q.752/3.9 Measurement
-- 3.9 was meanwhile cancelled in Q.752!
congestionEventsMSULoss GET SET-BY-CREATE;;; -- Measurement Q.752/3.11
CONDITIONAL PACKAGES
slCongestedDurationPackage PRESENT IF "the granularity period is 30 minutes";
REGISTERED AS { mtpObjectClass 30 };
signallingLinkSetDurationData MANAGED OBJECT CLASS
DERIVED FROM ss7CurrentData;
CHARACTERIZED BY signallingLinkSetDurationDataPackage PACKAGE
BEHAVIOUR signallingLinkSetDurationDataBehaviour BEHAVIOUR DEFINED AS
"This managed object class contains all signalling link set duration data.
The granularityPeriod is 30 minutes. The attributes are read-only.";;
ATTRIBUTES
slsUnavailable GET SET-BY-CREATE;;; -- Measurement Q.752/4.2
REGISTERED AS { mtpObjectClass 31 };
signallingPointData MANAGED OBJECT CLASS
DERIVED FROM ss7FirstAndIntervalCurrentData;
CHARACTERIZED BY signallingPointDataPackage PACKAGE
BEHAVIOUR signallingPointDataBehaviour BEHAVIOUR DEFINED AS
"This managed object class contains information about signalling point.
The preferred granularityPeriods are 5 or 30 minutes. All attributes are
read-only and are referenced by an instance of
ss7FirstAndIntervalThresholdData managed object class so does
discardedMSUs attribute when it is used as a first and interval measurement.";;
ATTRIBUTES
discardedMSUs GET SET-BY-CREATE, -- Measurement Q.752/5.5
transmittedUPUnavailable GET SET-BY-CREATE, -- Measurement Q.752/5.6
receivedUPUnavailable GET SET-BY-CREATE, -- Measurement Q.752/5.7
receivedTFC GET SET-BY-CREATE;;; -- Measurement Q.752/5.8
REGISTERED AS { mtpObjectClass 32 };
ss7CurrentData MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. Q.822 (1994)":currentData;
CHARACTERIZED BY ss7CurrentDataPackage PACKAGE
BEHAVIOUR ss7CurrentDataBehaviour BEHAVIOUR DEFINED AS
"This managed object class is used for subtyping of Q.752 duration
measurements. Subtypes will have to contain one or more attributes that
can be scanned.";;;;
REGISTERED AS { mtpObjectClass 33 };
ss7FirstAndIntervalCurrentData MANAGED OBJECT CLASS
DERIVED FROM ss7CurrentData;
CHARACTERIZED BY ss7FirstAndIntervalCurrentDataPackage PACKAGE
BEHAVIOUR ss7FirstAndIntervalCurrentDataBehaviour BEHAVIOUR DEFINED AS
"This managed object class is used for subtyping of Q.752 first and
interval measurements. Subtypes will have to contain one or more
attributes that can be scanned. The start of a measurement can possibly
generate an X.721:qualityOfServiceAlarm with an indication of the probable
cause in an instance of another class.";;;;
REGISTERED AS { mtpObjectClass 34 };
ss7FirstAndIntervalThresholdData MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. Q.822 (1994)": thresholdData;
CHARACTERIZED BY
"ITU-T Rec. Q.822 (1994)": counterThresholdListPkg,
ss7FirstAndIntervalThresholdDataPackage PACKAGE
BEHAVIOUR ss7FirstAndIntervalThresholdDataBehaviour BEHAVIOUR DEFINED AS
"The conditional package counterThresholdListPkg is mandatory for this
subclass. The threshold values of the attributes in the
counterThresholdAttributeList will be 1, indicating that the first event
should be notified to the managed using a qualityOfServiceAlarm
notification. The attributes being referenced will be part of instances
of ss7FirstAndIntervalCurrentData or one of its subclasses.";;;;
REGISTERED AS { mtpObjectClass 35 };
transmittedOctetsDPCMeasurement MANAGED OBJECT CLASS
DERIVED FROM ss7CurrentData;
CHARACTERIZED BY transmittedOctetsDPCMeasurementPackage PACKAGE
BEHAVIOUR transmittedOctetsDPCMeasurementBehaviour BEHAVIOUR DEFINED AS
"This managed object class starts a measurement for a specific DPC. The
preferred granularityPeriods are 5 and 30 minutes. Activation of these
measurements should be limited to a small number of signalling point codes
at a given time. The attribute is read-only.";;
ATTRIBUTES
dpc GET SET-BY-CREATE,
transmittedOctetsDPC GET SET-BY-CREATE;;; -- Measurement Q.752/6.2
REGISTERED AS { mtpObjectClass 36 };
transmittedOctetsDpcSioMeasurement MANAGED OBJECT CLASS
DERIVED FROM ss7CurrentData;
CHARACTERIZED BY transmittedOctetsDpcSioMeasurementPackage PACKAGE
BEHAVIOUR transmittedOctetsDpcSioMeasurementBehaviour BEHAVIOUR DEFINED AS
"This managed object class starts a measurement for a specific DPC/SIO
combination. The preferred granularityPeriods are 5 and 30 minutes.
Activation of these measurements should be limited to a small number of
signalling point codes at a given time. The attribute is read-only.";;
ATTRIBUTES
dpc GET SET-BY-CREATE,
sio GET SET-BY-CREATE,
transmittedOctetsDpcSio GET SET-BY-CREATE;;; -- Measurement Q.752/6.5
REGISTERED AS { mtpObjectClass 37 };
localChangeOversPackage PACKAGE
ATTRIBUTES
localChangeOvers GET SET-BY-CREATE; -- Measurement Q.752/1.10
REGISTERED AS { mtpPackage 53 };
slCongestedDurationPackage PACKAGE
ATTRIBUTES
slCongestedDuration GET SET-BY-CREATE; -- Measurement Q.752/3.7
REGISTERED AS { mtpPackage 54 };
adjacentInaccessibleDuration ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Seconds;
MATCHES FOR EQUALITY;
BEHAVIOUR adjacentInaccessibleDurationBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/5.2.";;
REGISTERED AS { mtpAttribute 135 };
adjacentInaccessibleEvents ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR adjacentInaccessibleEventsBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/5.1.";;
-- Modelling of Measurement Q.752/3.6 is for further study
REGISTERED AS { mtpAttribute 136 };
congestionEventsMSULoss ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR congestionEventsMSULossBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/3.11.";;
REGISTERED AS { mtpAttribute 137 };
discardedMSUs ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR discardedMSUsBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/3.10 and Q.752/5.5.";;
REGISTERED AS { mtpAttribute 138 };
handledOctetsOpcDpcSio ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR handledOctetsOpcDpcSioBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/6.6.";;
REGISTERED AS { mtpAttribute 139 };
handledOctetsSIO ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR handledOctetsSIOBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/6.3.";;
REGISTERED AS { mtpAttribute 140 };
handledMSUsOpcDpcSio ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR handledMSUsOpcDpcSioBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/6.7.";;
REGISTERED AS { mtpAttribute 141 };
localBusy ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR localBusyBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/2.15. See also 9.3/Q.704.";;
REGISTERED AS { mtpAttribute 142 };
localChangeOvers ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR localChangeOversBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/1.10. See also 5/Q.704.";;
REGISTERED AS { mtpAttribute 143 };
localMgntInhibit ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2: 1992":counter;
MATCHES FOR EQUALITY;
BEHAVIOUR localMgntInhibitBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/2.13. See also 10.2/Q.704.";;
REGISTERED AS { mtpAttribute 144 };
localMgntUninhibit ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2: 1992":counter;
MATCHES FOR EQUALITY;
BEHAVIOUR localMgntUninhibitBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/2.14. See also 10.3/Q.704.";;
REGISTERED AS { mtpAttribute 145 };
negAckReceived ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR negAckReceivedBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/1.9.";;
REGISTERED AS { mtpAttribute 146 };
receivedMSUs ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR receivedMSUsBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.751/3.5.";;
REGISTERED AS { mtpAttribute 147 };
receivedOctetsOPC ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR receivedOctetsOPCBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/6.1.";;
REGISTERED AS { mtpAttribute 148 };
receivedOctetsOpcSio ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR receivedOctetsOpcSioBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/6.4.";;
REGISTERED AS { mtpAttribute 149 };
receivedOctetsSIFSIO ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR receivedOctetsSIFSIOBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.751/3.4.";;
REGISTERED AS { mtpAttribute 150 };
receivedTFC ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.EventsCongestionLevel;
BEHAVIOUR receivedTFCBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/5.8.";;
REGISTERED AS { mtpAttribute 151 };
receivedUPUnavailable ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.EventsUP;
BEHAVIOUR receivedUPUnavailableBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/5.7. See also Recommendation
Q.704/11.7.2.";;
REGISTERED AS { mtpAttribute 152 };
retransmittedOctets ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR retransmittedOctetsBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/3.2. See also 5/Q.704.";;
REGISTERED AS { mtpAttribute 153 };
routeSetUnavailable ATTRIBUTE
DERIVED FROM "ITU Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR routeSetUnavailableBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/4.9. See also Recommendation
Q.704/11.2.2.";;
REGISTERED AS { mtpAttribute 154 };
routeSetUnavailableDuration ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Seconds;
MATCHES FOR EQUALITY;
BEHAVIOUR routeSetUnavailableDurationBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/4.10. See also Recommendation
Q.704/11.2.1.";;
REGISTERED AS { mtpAttribute 155 };
signUnitsReceived ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR signUnitsReceivedBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/1.8. See also 4/Q.704.";;
REGISTERED AS { mtpAttribute 156 };
sio ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.SIOType;
MATCHES FOR EQUALITY;
REGISTERED AS { mtpAttribute 157 };
slAlignment ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR slAlignmentBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/1.7.";;
REGISTERED AS { mtpAttribute 158 };
slCongestedDuration ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Seconds;
MATCHES FOR EQUALITY;
BEHAVIOUR slCongestedDurationBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/3.7.";;
REGISTERED AS { mtpAttribute 159 };
slCongestedStarts ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR slCongestedStartsBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/3.6. See also 3.8/Q.704.";;
-- Modelling of Measurement Q.752/3.6 is for further study
REGISTERED AS { mtpAttribute 160 };
slCongestionStops ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR slCongestionStopsBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/3.9. See also 3.8/Q.704.";;
REGISTERED AS { mtpAttribute 161 };
slFailed ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Seconds;
MATCHES FOR EQUALITY;
BEHAVIOUR slFailedBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/2.7. See also 3.2.2/Q.704.";;
REGISTERED AS { mtpAttribute 162 };
slInServiceDuration ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Seconds;
MATCHES FOR EQUALITY;
BEHAVIOUR slInServiceDurationBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/1.1.";;
REGISTERED AS { mtpAttribute 163 };
slLocalInhibition ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Seconds;
MATCHES FOR EQUALITY;
BEHAVIOUR slLocalInhibitionBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/2.5. See also 3.2.8/Q.704.";;
REGISTERED AS { mtpAttribute 164 };
slRemoteInhibition ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Seconds;
MATCHES FOR EQUALITY;
BEHAVIOUR slRemoteInhibitionBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/2.6. See also 3.2.2/Q.704.";;
REGISTERED AS { mtpAttribute 165 };
slRemoteProcOutage ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Seconds;
MATCHES FOR EQUALITY;
BEHAVIOUR slRemoteProcOutageBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/2.9. See also 3.2.6/Q.704.";;
REGISTERED AS { mtpAttribute 166 };
slsUnavailable ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Seconds;
BEHAVIOUR slsUnavailableBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/4.2.";;
REGISTERED AS { mtpAttribute 167 };
slUnavailabilityDuration ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.Seconds;
MATCHES FOR EQUALITY;
BEHAVIOUR slUnavailabilityDurationBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/2.1.";;
REGISTERED AS { mtpAttribute 169 };
transmittedMSUs ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR transmittedMSUsBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/3.3.";;
REGISTERED AS { mtpAttribute 170 };
transmittedOctetsSIFSIO ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR transmittedOctetsSIFSIOBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/3.1. See also 2.3.8/Q.704.";;
REGISTERED AS { mtpAttribute 171 };
transmittedOctetsDPC ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR transmittedOctetsDPCBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/6.2.";;
REGISTERED AS { mtpAttribute 172 };
transmittedOctetsDpcSio ATTRIBUTE
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":counter;
BEHAVIOUR transmittedOctetsDpcSioBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/6.5.";;
REGISTERED AS { mtpAttribute 173 };
transmittedUPUnavailable ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.EventsUP;
BEHAVIOUR transmittedUPUnavailableBehaviour BEHAVIOUR DEFINED AS
"This attribute represents measurement Q.752/5.6. See also Recommendation
Q.704/11.7.2.";;
REGISTERED AS { mtpAttribute 174 };
managedElement-ss7FirstAndIntervalThresholdData NAME BINDING
SUBORDINATE OBJECT CLASS ss7FirstAndIntervalThresholdData;
NAMED BY
SUPERIOR OBJECT CLASS "ITU-T Rec. M.3100 (1992)":managedElement AND SUBCLASSES;
WITH ATTRIBUTE "ITU-T Rec. Q.822 (1994)": thresholdDataId;
CREATE;
DELETE ;
REGISTERED AS { mtpNameBinding 41};
mtpSignPoint-handledMSUsOpcDpcSioMeasurement NAME BINDING
SUBORDINATE OBJECT CLASS handledMSUsOpcDpcSioMeasurement;
NAMED BY
SUPERIOR OBJECT CLASS mtpSignPoint;
WITH ATTRIBUTE "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11 : 1993": scannerId;
CREATE;
DELETE ;
REGISTERED AS { mtpNameBinding 16 };
mtpSignPoint-handledOctetsOpcDpcSioMeasurement NAME BINDING
SUBORDINATE OBJECT CLASS handledOctetsOpcDpcSioMeasurement;
NAMED BY
SUPERIOR OBJECT CLASS mtpSignPoint;
WITH ATTRIBUTE "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11 : 1993": scannerId;
CREATE;
DELETE ;
REGISTERED AS { mtpNameBinding 17 };
mtpSignPoint-handledOctetsSIOMeasurement NAME BINDING
SUBORDINATE OBJECT CLASS handledOctetsSIOMeasurement;
NAMED BY
SUPERIOR OBJECT CLASS mtpSignPoint;
WITH ATTRIBUTE "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11 : 1993": scannerId;
CREATE;
DELETE ;
REGISTERED AS { mtpNameBinding 18 };
signRouteSetNePart-allSignallingPointUtilisationData NAME BINDING
SUBORDINATE OBJECT CLASS allSignallingPointUtilizationData AND SUBCLASSES;
NAMED BY
SUPERIOR OBJECT CLASS signRouteSetNePart;
WITH ATTRIBUTE "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11 : 1993": scannerId;
CREATE;
DELETE ;
REGISTERED AS { mtpNameBinding 40 };
signRouteSetNePart-oblSignallingPointUtilisationData NAME BINDING
SUBORDINATE OBJECT CLASS oblSignallingPointUtilizationData AND SUBCLASSES;
NAMED BY
SUPERIOR OBJECT CLASS signRouteSetNePart;
WITH ATTRIBUTE "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11 : 1993": scannerId;
CREATE;
DELETE ;
REGISTERED AS { mtpNameBinding 19 };
mtpSignPoint-receivedOctetsOPCMeasurement NAME BINDING
SUBORDINATE OBJECT CLASS receivedOctetsOPCMeasurement;
NAMED BY
SUPERIOR OBJECT CLASS mtpSignPoint;
WITH ATTRIBUTE "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11 : 1993": scannerId;
CREATE;
DELETE ;
REGISTERED AS { mtpNameBinding 20 };
mtpSignPoint-receivedOctetsOpcSioMeasurement NAME BINDING
SUBORDINATE OBJECT CLASS receivedOctetsOpcSioMeasurement;
NAMED BY
SUPERIOR OBJECT CLASS mtpSignPoint;
WITH ATTRIBUTE "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11 : 1993": scannerId;
CREATE;
DELETE ;
REGISTERED AS { mtpNameBinding 21 };
signRouteSetNePart-routeSetInformationData NAME BINDING
SUBORDINATE OBJECT CLASS routeSetInformationData;
NAMED BY
SUPERIOR OBJECT CLASS signRouteSetNePart;
WITH ATTRIBUTE "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11 : 1993": scannerId;
CREATE;
DELETE ;
REGISTERED AS { mtpNameBinding 22 };
mtpSignPoint-signallingPointData NAME BINDING
SUBORDINATE OBJECT CLASS signallingPointData;
NAMED BY
SUPERIOR OBJECT CLASS mtpSignPoint;
WITH ATTRIBUTE "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11 : 1993": scannerId;
CREATE;
DELETE ;
REGISTERED AS { mtpNameBinding 23 };
mtpSignPoint-transmittedOctetsDPCMeasurement NAME BINDING
SUBORDINATE OBJECT CLASS transmittedOctetsDPCMeasurement;
NAMED BY
SUPERIOR OBJECT CLASS mtpSignPoint;
WITH ATTRIBUTE "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11 : 1993": scannerId;
CREATE;
DELETE ;
REGISTERED AS { mtpNameBinding 24 };
mtpSignPoint-transmittedOctetsDpcSioMeasurement NAME BINDING
SUBORDINATE OBJECT CLASS transmittedOctetsDpcSioMeasurement;
NAMED BY
SUPERIOR OBJECT CLASS mtpSignPoint;
WITH ATTRIBUTE "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11 : 1993": scannerId;
CREATE;
DELETE ;
REGISTERED AS { mtpNameBinding 25 };
signLinkSetTP-signallingLinkSetDurationData NAME BINDING
SUBORDINATE OBJECT CLASS signallingLinkSetDurationData;
NAMED BY
SUPERIOR OBJECT CLASS signLinkSetTp;
WITH ATTRIBUTE "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11 : 1993": scannerId;
CREATE;
DELETE ;
REGISTERED AS { mtpNameBinding 26 };
signLinkTp-all5And30MinSignallingLinkDurationData NAME BINDING
SUBORDINATE OBJECT CLASS all5And30MinSignallingLinkDurationData;
NAMED BY
SUPERIOR OBJECT CLASS signLinkTp;
WITH ATTRIBUTE "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11 : 1993": scannerId;
CREATE;
DELETE ;
REGISTERED AS { mtpNameBinding 27 };
signLinkTp-oblSignallingLinkDurationData NAME BINDING
SUBORDINATE OBJECT CLASS oblSignallingLinkDurationData AND SUBCLASSES;
NAMED BY
SUPERIOR OBJECT CLASS signLinkTp;
WITH ATTRIBUTE "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11 : 1993": scannerId;
CREATE;
DELETE ;
REGISTERED AS { mtpNameBinding 28 };
signLinkTp-oblSignallingLinkUtilisationData NAME BINDING
SUBORDINATE OBJECT CLASS oblSignallingLinkUtilizationData AND SUBCLASSES;
NAMED BY
SUPERIOR OBJECT CLASS signLinkTp;
WITH ATTRIBUTE "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11 : 1993": scannerId;
CREATE;
DELETE ;
REGISTERED AS { mtpNameBinding 29 };
signLinkTp-signallingLinkCongestionData NAME BINDING
SUBORDINATE OBJECT CLASS signallingLinkCongestionData;
NAMED BY
SUPERIOR OBJECT CLASS signLinkTp;
WITH ATTRIBUTE "ITU-T Rec. X.739 (1993) | ISO/IEC 10164-11 : 1993": scannerId;
CREATE;
DELETE ;
REGISTERED AS { mtpNameBinding 30 };
mtpRouteVerifTest MANAGED OBJECT CLASS
DERIVED FROM "ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":top;
CHARACTERIZED BY mtpRouteTestPackage PACKAGE
BEHAVIOUR mtpRouteTestBehaviour BEHAVIOUR DEFINED AS
"The route verification test is used to determine whether the data of the
MTP route tables throughout the network is consistent. The test is started
from a certain SP by its OS and this SP will report the test result to its
OS. The test checks whether a certain destination can be reached via all
possible routes without loops and excessive length routes.
Administrative State:
- Unlocked: The MRVT is allowed to perform its normal test functions.
ACTIONS will be accepted to start an MRVT for a certain destination.
- Locked: The MRVT is not allowed to perform its normal functions. No
ACTIONS will be accepted.
- Shutting down: The usage of the MRVT is administratively limited to the
running tests. ACTIONS to start a new MRVT will be rejected. If all
running tests are finished, the administrative state becomes locked.
Operational State:
- Enabled: When the MRVT is in the enabled operational state, it is fully
operational.
- Disabled: The MRVT is incapable of performing its normal function.
ACTIONS to start an MRVT will be rejected.
Availability Status:
The supported values for this attribute are:
- Dependency: The MRVT cannot operate because a server resource on which
it depends is unavailable (e.g. OMASE, TCAP, SCCP). In this case the
operational state is disabled.
- Empty SET
Usage State:
The supported values for this attribute are:
- Idle: No test is running.
- Active: One or more tests are running, and the instance has spare
capacity to provide
additional MRVTs simultaneously.
- Busy: The instance cannot provide an additional test, because the
maximum number of
tests that can be run simultaneously has been reached. The number of
tests is limited by the value of the 'maxNumOfTests' attribute.
ACTIONS to start an additional MRVT will be rejected.
A change in the operational state shall cause a state change notification.
A change in the administrative state or the usage state shall not emit a
state change notification.";;
ATTRIBUTES
mtpRouteTestId GET SET-BY-CREATE,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":administrativeState
GET-REPLACE,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":operationalState GET,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":usageState GET,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":availabilityStatus GET,
"ITU-T Rec. M.3100 (1992)":version GET SET-BY-CREATE,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":providerObject GET-REPLACE,
maxNumOfTests GET SET-BY-CREATE,
timeD GET SET-BY-CREATE;
ACTIONS
startMtpRouteTest;
NOTIFICATIONS
mtpRouteTestResult,
"ITU-T Rec. X.721 (1992) | ISO/IEC 10165-2 : 1992":stateChange;;;
CONDITIONAL PACKAGES
"ITU-T Rec. M.3100 (1992)":createDeleteNotificationsPackage PRESENT IF "the
objectCreation and objectDeletion notifications defined in 'ITU-T Rec.
X.721 (1992) | ISO/IEC 10165-2 : 1992' are supported by an instance of
this class",
"ITU-T Rec. M.3100 (1992)":attributeValueChangeNotificationPackage PRESENT
IF "the attributeValueChangeNotification defined in 'ITU-T Rec. X.721
(1992) | ISO/IEC 10165-2 : 1992' is supported by an instance of this class",
mtpRouteVerifTestNamePackage PRESENT IF "an instance supports it";
REGISTERED AS { mtpObjectClass 38 };
mtpRouteVerifTestNamePackage PACKAGE
ATTRIBUTES
mtpRouteVerifTestName GET-REPLACE;
REGISTERED AS { mtpPackage 55 };
maxNumOfTests ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.MaxNumOfTests;
BEHAVIOUR maxNumOfTestsBehaviour BEHAVIOUR DEFINED AS
"This attribute represents the maximum number of simultaneous route tests at
one SP.";;
REGISTERED AS { mtpAttribute 175 };
mtpRouteTestId ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.NameType;
MATCHES FOR EQUALITY, SUBSTRINGS;
REGISTERED AS { mtpAttribute 176 };
mtpRouteVerifTestName ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.AdditionalName;
MATCHES FOR EQUALITY;
BEHAVIOUR mtpRouteVerifTestNameBehaviour BEHAVIOUR DEFINED AS
"This attribute is an additional name for instances of the mtpRouteVerifTest
managed object class.";;
REGISTERED AS { mtpAttribute 177 };
timeD ATTRIBUTE
WITH ATTRIBUTE SYNTAX MTPDefinedTypesModule.TimeD;
BEHAVIOUR timeDBehaviour BEHAVIOUR DEFINED AS
"This attribute represents the maximum performance time D for an STP to
process MRVT and MRVA messages.";;
REGISTERED AS { mtpAttribute 178 };
startMtpRouteTest ACTION
BEHAVIOUR
startMtpRouteTestBehaviour BEHAVIOUR DEFINED AS
"This action is used by the Management Process to initiate an MRVT
procedure. The MRVT procedure sends an MRVT message for each signalling
route which is contained in the MTP routing tables to reach the test
destination. The destination (DPC) of each of these messages is the
adjacent signalling point within the particular route under test. For each
MRVT message a corresponding MRVA message is expected.
When the MRVT procedure is initiated, a timer T1 is started. The value of
timer T1 depends on the value of the attribute 'timeD' and the value of
'threshold' given in the action parameters (2.4/Q.753).
When all MRVA messages expected have been received or when T1 expires, the
test is complete
and the result will be returned to the Management Process in the action reply.
The Action will be rejected, if
- the administrative state is locked.
- the operational state is disabled.
- the usage state is busy.
- an MRVT for the test destination given in the action parameters is
already in progress.
The reason for the rejection will be returned to the Management Process in
the action reply.";;
MODE CONFIRMED;
WITH INFORMATION SYNTAX MTPDefinedTypesModule.StartMtpRouteTest;
WITH REPLY SYNTAX MTPDefinedTypesModule.ResultMtpRouteTest;
REGISTERED AS { mtpAction 6 };
mtpRouteTestResult NOTIFICATION
BEHAVIOUR mtpRouteTestResultBehaviour BEHAVIOUR DEFINED AS
"The reception of an MRVR message regardless of whether or not the receiving
SP was the initiator causes this notification type. The notification
includes the information contained in the received MRVR message.";;
WITH INFORMATION SYNTAX MTPDefinedTypesModule.MtpRouteVerifTestResultSntx;
REGISTERED AS { mtpNotification 3 };
mtpSignPoint-mtpRouteVerifTest NAME BINDING
SUBORDINATE OBJECT CLASS mtpRouteVerifTest;
NAMED BY
SUPERIOR OBJECT CLASS mtpSignPoint;
WITH ATTRIBUTE mtpRouteTestId;
CREATE;
DELETE;
REGISTERED AS { mtpNameBinding 31 };
-- =============================================================================
-- Formatted by OpenT2 Version 5.5.6.34 on Fri Aug 20 11:20:49 2004