-- MIB module extracted from ITU-T J.192 (03/2004)
CABH-CDP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Unsigned32 FROM SNMPv2-SMI
MacAddress,
TruthValue,
DateAndTime,
RowStatus FROM SNMPv2-TC
OBJECT-GROUP,
MODULE-COMPLIANCE FROM SNMPv2-CONF
InetAddressType,
InetAddress FROM INET-ADDRESS-MIB
SnmpAdminString FROM SNMP-FRAMEWORK-MIB
clabProjCableHome FROM CLAB-DEF-MIB;
--=================================================================
--
-- History:
--
-- Date Modified by Reason
-- 04/05/02 Issued I01
-- 09/20/02 Issued I02
-- 10/25/02 IETF I-D revisions
-- 04/11/03 Issued I03
--
--=================================================================
cabhCdpMib MODULE-IDENTITY
LAST-UPDATED "200304110000Z" -- April 11, 2003
ORGANIZATION "CableLabs Broadband Access Department"
CONTACT-INFO
"Kevin Luehrs
Postal: Cable Television Laboratories, Inc.
400 Centennial Parkway
Louisville, Colorado 80027-1266
U.S.A.
Phone: +1 303-661-9100
Fax: +1 303-661-9199
E-mail: k.luehrs@cablelabs.com"
DESCRIPTION
"This MIB module supplies the basic management objects
for the CableHome DHCP Portal (CDP) portion of the PS database.
Acknowledgements:
Roy Spitzer - Consultant to CableLabs
Mike Mannette - Consultant to CableLabs
Randy Dunton - Intel
Dmitrii Loukianov - Intel
Itay Sherman - Texas Instruments
Chris Zacker - Broadcom
Rick Vetter - Consultant to CableLabs
John Bevilacqua - YAS"
::= { clabProjCableHome 4 }
cabhCdpObjects OBJECT IDENTIFIER ::= { cabhCdpMib 1 }
cabhCdpBase OBJECT IDENTIFIER ::= { cabhCdpObjects 1 }
cabhCdpAddr OBJECT IDENTIFIER ::= { cabhCdpObjects 2 }
cabhCdpServer OBJECT IDENTIFIER ::= { cabhCdpObjects 3 }
--
-- The following group describes the base objects in the Cable Home
-- DHCP Portal. The rest of this group deals addresses defined on
-- the LAN side.
--
cabhCdpSetToFactory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reading this object always returns false(2). When the
cabhCdpSetToFactory object is set to true(1), the PS must
take the following actions:
1. Clear all cabhCdpLanAddrEntries in the CDP LAN Address
Table.
2. The CDS must offer the factory default DHCP options
at the next lease renewal time.
3. Reset the following objects to their factory default
values:
cabhCdpLanTransThreshold,
cabhCdpLanTransAction,
cabhCdpWanDataIpAddrCount,
cabhCdpLanPoolStartType,
cabhCdpLanPoolStart,
cabhCdpLanPoolEndType,
cabhCdpLanPoolEnd,
cabhCdpServerNetworkNumberType,
cabhCdpServerNetworkNumber,
cabhCdpServerSubnetMaskType,
cabhCdpServerSubnetMask,
cabhCdpServerTimeOffset,
cabhCdpServerRouterType,
cabhCdpServerRouter,
cabhCdpServerDnsAddressType,
cabhCdpServerDnsAddress,
cabhCdpServerSyslogAddressType,
cabhCdpServerSyslogAddress,
cabhCdpServerDomainName,
cabhCdpServerTTL,
cabhCdpServerInterfaceMTU,
cabhCdpServerVendorSpecific,
cabhCdpServerLeaseTime,
cabhCdpServerDhcpAddressType,
cabhCdpServerDhcpAddress,
cabhCdpServerCommitStatus"
::= { cabhCdpBase 1 }
cabhCdpLanTransCurCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of active leases in the
cabhCdpLanAddrTable (the number of row entries in the
table that have a cabhCdpLanAddrMethod value of
reservationActive(2) or dynamicActive (4)). This count
does not include expired leases or reservations not
associated with a current lease."
::= { cabhCdpBase 2 }
cabhCdpLanTransThreshold OBJECT-TYPE
SYNTAX INTEGER (0..65533)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The threshold number of LAN-Trans IP addresses allocated
or assigned above which the PS generates an alarm
condition. Whenever an attempt is made to allocate a
LAN-Trans IP address when cabhCdpLanTransCurCount is
greater than or equal to cabhCdpLanTransThreshold, an
event is generated. A value of 0 indicates that the CDP
sets the threshold at the highest number of addresses in
the LAN address pool."
DEFVAL {0 }
::= { cabhCdpBase 3 }
cabhCdpLanTransAction OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
noAssignment (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action taken when the CDS assigns a LAN-Trans
address and the number of LAN-Trans addresses assigned
(cabhCdpLanTransCurCount) is greater than the threshold
(cabhCdpLanTransThreshold) The actions are as follows:
normal - assign a LAN-Trans IP address as would
normally occur if the threshold was not exceeded.
noAssignment - do not assign a LAN-Trans IP address."
DEFVAL { normal }
::= { cabhCdpBase 4 }
cabhCdpWanDataIpAddrCount OBJECT-TYPE
SYNTAX INTEGER ( 0..63 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the number of WAN-Data IP addresses the
PS's CDC must attempt to acquire via DHCP."
DEFVAL {0 }
::= { cabhCdpBase 5 }
--
-- CDP Address Management Tables
--
--====================================================================
--
-- cabhCdpLanAddrTable (CDP LAN Address Table)
--
-- The cabhCdpLanAddrTable contains the DHCP parameters
-- for each IP address served to the LAN-Trans realm.
--
-- This table contains a list of entries for the LAN side CDP
-- parameters. These parameters can be set
-- either by the CDP or by the cable operator through the CMP.
--
--=========================================================================
cabhCdpLanAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF CabhCdpLanAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is a list of LAN-Trans realm parameters.
This table has one row entry for each allocated
LAN-Trans IP address. Each row must have at least a
valid cabhCdpLanAddrMethod, a cabhCdpLanAddrIpType, a
unique cabhCdpLanAddrIp, and a unique
cabhCdpLanAddrClientId value.
Static/Manual address assignment: To create a new DHCP
address reservation, the NMS creates a row with: an
index comprised of a new cabhCdpLanAddrIp and its
cabhCdpLanAddrIpType, a new unique
cabhCdpLanAddrClientID, (an empty LeaseCreateTime and
empty LeaseExpireTime,) and a
cabhCdpLanDataAddrRowStatus of createAndGo(4). If the
syntax and values of the new row - indicating a
reservation - are valid, the PS must set
cabhCdpLanAddrMethod to reservationInactive(1) and
cabhCdpLanDataAddrRowStatus to active(1). When the PS
grants a lease for a reserved IP, it must set the
cabhCdpLanAddrMethod object for that row to
reservationActive(2). When a lease for a reserved IP
expires, the PS must set the corresponding row's
cabhCdpLanAddrMethod object to reservationInactive(1).
For row entries that represent lease reservations - rows
in which the cabhCdpLanAddrMethod object has a value of
either reservationInactive(1) or reservationActive(2) -
the cabhCdpLanAddrIpType, cabhCdpLanAddrIp,
cabhCdpLanAddrClientID, cabhCdpLanAddrMethod, and
cabhCdpLanAddrHostName object values must persist across
PS reboots.
Dynamic address assignment: When the PS grants a lease
for a non-reserved IP, it must set the
cabhCdpLanAddrMethod object for that row to
dynamicActive(4). When a lease for a non-reserved IP
expires, the PS must set the corresponding row's
cabhCdpLanAddrMethod object to dynamicInactive(3). The
PS must create new row entries using cabhCdpLanAddrIp
values that are unique to this table. If all
cabhCdpLanAddrIp values in the range defined by
cabhCdpLanPoolStart and cabhCdpLanPoolEnd are in use in
this table, the PS may overwrite the
cabhCdpLanAddrClientId of a row that has a
cabhCdpLanAddrMethod object with a value of
dynamicInactive(3) with a new cabhCdpLanAddrClientId
value and use that cabhCdpLanAddrIp as part of a new
lease. For row entries that represent active leases -
rows in which the cabhCdpLanAddrMethod object has a
value of dynamicActive(4) - the cabhCdpLanAddrIpType,
cabhCdpLanAddrIp, cabhCdpLanAddrClientID,
cabhCdpLanAddrMethod, and cabhCdpLanAddrHostName object
values must persist across PS reboots."
::= { cabhCdpAddr 1 }
cabhCdpLanAddrEntry OBJECT-TYPE
SYNTAX CabhCdpLanAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of general parameters pertaining to LAN-Trans IP
address reservations and leases."
INDEX { cabhCdpLanAddrIpType, cabhCdpLanAddrIp }
::= { cabhCdpLanAddrTable 1 }
CabhCdpLanAddrEntry ::= SEQUENCE {
cabhCdpLanAddrIpType InetAddressType,
cabhCdpLanAddrIp InetAddress,
cabhCdpLanAddrClientID MacAddress,
cabhCdpLanAddrLeaseCreateTime DateAndTime,
cabhCdpLanAddrLeaseExpireTime DateAndTime,
cabhCdpLanAddrMethod INTEGER,
cabhCdpLanAddrHostName SnmpAdminString,
cabhCdpLanAddrRowStatus RowStatus
}
cabhCdpLanAddrIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of IP address assigned to the LAN IP Device
in the LAN-Trans Realm."
::= { cabhCdpLanAddrEntry 1 }
cabhCdpLanAddrIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address assigned to the LAN IP Device. This parameter is
entered by the CDP when the CDS grants a lease to a LAN IP
Device in the LAN-Trans realm and creates a row in this table.
Alternatively, this parameter can be entered by the NMS
through the CMP, when the NMS creates a new DHCP address
reservation. Each cabhCdpLanAddrIp in the table must fall
within the range of IPs defined inclusively by
cabhCdpLanPoolStart and cabhCdpLanPoolEnd. The PS must
return an inconsistentValue error if the NMS attempts to
create a row entry with a cabhCdpLanAddrIP value that falls
outside of this range or is not unique from all existing
cabhCdpLanAddrIP entries in this table. The address type of
this object is specified by cabhCdpLanAddrIpType."
::= { cabhCdpLanAddrEntry 2 }
cabhCdpLanAddrClientID OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The client's (i.e., LAN IP Device's) hardware address as indicated in
the chaddr field of its DHCP REQUEST message. There is a one-to-one
relationship between the hardware address and the LAN IP Device. This
parameter is entered by the PS (CDP) when the CDS grants a lease to a
LAN IP Device in the LAN-Trans realm and creates a row in this table.
Alternatively this parameter can be created by the NMS through the CMP,
when the NMS creates a new DHCP address reservation by accessing the
cabhCdpLanDataAddrRowStatus object with an index comprised of a unique
cabhCdpLanAddrIp and creating a row with a unique
cabhCdpLanAddrClientID."
::= { cabhCdpLanAddrEntry 3 }
cabhCdpLanAddrLeaseCreateTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the date and time that the LAN-Trans lease was
created (if it has not yet been renewed) or last renewed."
::= { cabhCdpLanAddrEntry 4 }
cabhCdpLanAddrLeaseExpireTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the date and time that the LAN-trans lease expired
or will expire."
::= { cabhCdpLanAddrEntry 5 }
cabhCdpLanAddrMethod OBJECT-TYPE
SYNTAX INTEGER {
reservationInactive (1),
reservationActive (2),
dynamicInactive (3),
dynamicActive (4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The IP allocation method indicated by this row.
reservationInactive(1) indicates a reserved IP that has
not yet been leased or that has an expired lease.
reservationActive(2) indicates a reserved IP that has an
active lease. dynamicInactive(3) indicates an IP that was
once dynamically assigned to a LAN-Trans device but
currently has an expired lease. dynamicActive(4)
indicates an IP that was dynamically assigned to a
LAN-Trans device that has a current lease."
::= { cabhCdpLanAddrEntry 6 }
cabhCdpLanAddrHostName OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Host Name of the LAN IP address, based on DCHP
option 12."
::= { cabhCdpLanAddrEntry 7 }
cabhCdpLanAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus interlock for creation and deletion of row entries.
The PS must not allow the NMS to set RowStatus to notInService(2).
The PS must assign a RowStatus of notInService(2) to any new row
entry created with a non-unique, cabhCdpLanAddrClientID value.
The PS must assign a RowStatus of notReady(3) to any new row
entry created without a cabhCdpLanAddrClientID. The PS will
prevent modification of this table's columns and return an
inconsistentValue error, if the NMS attempts to make such
modifications while the RowStatus is active(1)."
::= { cabhCdpLanAddrEntry 8 }
--========================================================================
--
-- cabhCdpWanDataAddrTable (CDP WAN-Data Address Table)
--
-- The cabhCdpWanDataAddrTable contains the configuration or DHCP
-- parameters for each IP address mapping per WAN-Data IP Address.
--
--=========================================================================
cabhCdpWanDataAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF CabhCdpWanDataAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains WAN-Data address realm information."
::= { cabhCdpAddr 2 }
cabhCdpWanDataAddrEntry OBJECT-TYPE
SYNTAX CabhCdpWanDataAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of general parameter for CDP WAN-Data address realm."
INDEX { cabhCdpWanDataAddrIndex }
::= { cabhCdpWanDataAddrTable 1 }
CabhCdpWanDataAddrEntry ::= SEQUENCE {
cabhCdpWanDataAddrIndex INTEGER,
cabhCdpWanDataAddrClientId OCTET STRING,
cabhCdpWanDataAddrIpType InetAddressType,
cabhCdpWanDataAddrIp InetAddress,
cabhCdpWanDataAddrRenewalTime Integer32,
cabhCdpWanDataAddrRowStatus RowStatus
}
cabhCdpWanDataAddrIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index into table."
::= { cabhCdpWanDataAddrEntry 1 }
cabhCdpWanDataAddrClientId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..80))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A unique WAN-Data ClientID used when attempting the acquire a
WAN-Data IP Address via DHCP."
::= { cabhCdpWanDataAddrEntry 2 }
cabhCdpWanDataAddrIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type assigned on the WAN-Data side."
DEFVAL { ipv4 }
::= { cabhCdpWanDataAddrEntry 3 }
cabhCdpWanDataAddrIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address assigned on the WAN-Data side."
::= { cabhCdpWanDataAddrEntry 4 }
cabhCdpWanDataAddrRenewalTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the time remaining before the lease expires.
This is based on DHCP Option 51."
::= { cabhCdpWanDataAddrEntry 5 }
cabhCdpWanDataAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus interlock for creation and deletion of row
entries. Any writable object in a row can be modified at
any time while the row is active(1). The PS must assign a
RowStatus of notInService(2) to any new row entry created
with a cabhCdpWanDataAddrClientId that is not unique within
this table."
::= { cabhCdpWanDataAddrEntry 6 }
--===================================================================
--
-- cabhCdpWanDnsServerTable (CDP WAN DNS Server Table)
--
-- The cabhCdpWanDnsServerTable is a table of 3 cable network
-- and Internet DNS Servers.
--
--===================================================================
cabhCdpWanDnsServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CabhCdpWanDnsServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains the IP addresses of cable network and
Internet DNS servers, in the order of preference in which
the PS's CNP will query them, when it cannot resolve a DNS
query using local information. Entries in this table are
updated with the information contained in DHCP Option 6,
received during both the WAN-Man and WAN-Data IP acquisition
processes."
::= { cabhCdpAddr 3 }
cabhCdpWanDnsServerEntry OBJECT-TYPE
SYNTAX CabhCdpWanDnsServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of cable network and Internet DNS servers."
INDEX { cabhCdpWanDnsServerOrder }
::= { cabhCdpWanDnsServerTable 1 }
CabhCdpWanDnsServerEntry ::= SEQUENCE {
cabhCdpWanDnsServerOrder INTEGER,
cabhCdpWanDnsServerIpType InetAddressType,
cabhCdpWanDnsServerIp InetAddress
}
cabhCdpWanDnsServerOrder OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
secondary(2),
tertiary(3)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The order of preference for cable network and Internet DNS
servers, as listed in DHCP option 6 (Domain Server). Any
time the CDC receives valid IP address information within
DHCP Option 6, as part of lease acquisition or renewal of
a WAN-Man or WAN-Data IP, it must update this information
into this table. As entries in DHCP Option 6 are listed in
order of preference the highest priority entry in DHCP
Option 6 must correspond to the row with a
cabhCdpWanDnsServerOrder with a value of 1. If DHCP
Option 6 contains 2 valid IP addresses, the PS must update
the rows with cabhCdpWanDnsServerOrder values of 1 and 2.
If DHCP Option 6 contains 3 valid IP addresses, the PS must
update rows with cabhCdpWanDnsServerOrder values of 1, 2,
and 3. Any DNS server information included in DHCP Option 6
beyond primary, secondary and tertiary will not be
represented in this table."
::= { cabhCdpWanDnsServerEntry 1 }
cabhCdpWanDnsServerIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter indicates the IP address type of a WAN DNS
server."
DEFVAL { ipv4 }
::= { cabhCdpWanDnsServerEntry 2 }
cabhCdpWanDnsServerIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter indicates the IP address of a WAN DNS server.
The type of this address is specified by
cabhCdpWanDnsServerIpType."
::= { cabhCdpWanDnsServerEntry 3 }
--
-- DHCP Server Side (CDS) Option Values for the LAN-Trans realm
--
cabhCdpLanPoolStartType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Address type of the start of range LAN Trans IP Addresses."
DEFVAL { ipv4 }
::= { cabhCdpServer 1 }
cabhCdpLanPoolStart OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start of range LAN Trans IP Addresses."
DEFVAL { 'c0a8000a'h } -- 192.168.0.10
-- 192.168.0.0 is the network number
-- 192.168.0.255 is broadcast
-- address and 192.168.0.1
-- is reserved for the router
::= { cabhCdpServer 2 }
cabhCdpLanPoolEndType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Address type of the end of range LAN Trans IP Addresses."
DEFVAL { ipv4 }
::= { cabhCdpServer 3 }
cabhCdpLanPoolEnd OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The end of range for LAN-Trans IP Addresses."
DEFVAL { 'c0a800fe'h } -- 192.168.0.254
::= { cabhCdpServer 4 }
cabhCdpServerNetworkNumberType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address type of the LAN-Trans network number."
DEFVAL { ipv4 }
::= { cabhCdpServer 5 }
cabhCdpServerNetworkNumber OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LAN-Trans network number."
DEFVAL { 'c0a80000'h }
::= { cabhCdpServer 6 }
cabhCdpServerSubnetMaskType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of LAN-Trans Subnet Mask."
DEFVAL { ipv4 }
::= { cabhCdpServer 7 }
cabhCdpServerSubnetMask OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 1 - Value of LAN-Trans Subnet Mask."
DEFVAL { 'ffffff00'h } -- 255.255.255.0
::= { cabhCdpServer 8 }
cabhCdpServerTimeOffset OBJECT-TYPE
SYNTAX Integer32 (-86400..86400) -- 0 to 24 hours (in seconds)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 2 - Value of LAN-Trans Time Offset from
Coordinated Universal Time (UTC)."
DEFVAL { 0 } -- UTC
::= { cabhCdpServer 9 }
cabhCdpServerRouterType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of Address, Router for the LAN-Trans
address realm."
DEFVAL { ipv4 }
::= { cabhCdpServer 10 }
cabhCdpServerRouter OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 3 - Router for the LAN-Trans
address realm."
DEFVAL { 'c0a80001'h } -- 192.168.0.1
::= { cabhCdpServer 11 }
cabhCdpServerDnsAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Type of IP Addresses of the LAN-Trans address realm
DNS servers."
DEFVAL { ipv4 }
::= { cabhCdpServer 12 }
cabhCdpServerDnsAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Addresses of the LAN-Trans address realm
DNS servers. As a default there is only one DNS
server and it is the address specified in Option
Value 3 - cabhCdpServerRouter. Only one address
is specified."
DEFVAL { 'c0a80001'h } -- 192.168.0.1
::= { cabhCdpServer 13 }
cabhCdpServerSyslogAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Type of IP Address of the LAN-Trans SYSLOG servers."
DEFVAL { ipv4 }
::= { cabhCdpServer 14 }
cabhCdpServerSyslogAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Addresses of the LAN-Trans SYSLOG servers.
As a default there are no SYSLOG Servers.
The factory defaults contains the indication of
no Syslog Server value equals (0.0.0.0)."
DEFVAL { '00000000'h } -- 0.0.0.0
::= { cabhCdpServer 15 }
cabhCdpServerDomainName OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 15 - Domain name of LAN-Trans address realm."
DEFVAL {""}
::= { cabhCdpServer 16 }
cabhCdpServerTTL OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 23 - LAN-Trans Time to Live."
DEFVAL { 64 }
::= { cabhCdpServer 17 }
cabhCdpServerInterfaceMTU OBJECT-TYPE
SYNTAX Integer32 (0 | 68..4096)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 26 - LAN-Trans Interface MTU. If the value
of this object is 0, the PS must not include this option in
its DHCP Offer or DHCP Ack messages to LAN IP Devices."
DEFVAL { 0 }
::= { cabhCdpServer 18 }
cabhCdpServerVendorSpecific OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 43 - Vendor Specific Options."
DEFVAL { ''h }
::= { cabhCdpServer 19 }
cabhCdpServerLeaseTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 51 –Lease Time for LAN IP Devices in the LAN-Trans realm
(seconds)."
DEFVAL { 3600 }
::= { cabhCdpServer 20 }
cabhCdpServerDhcpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 54 - Type of LAN-Trans DHCP server IP address."
DEFVAL { ipv4 }
::= { cabhCdpServer 21 }
cabhCdpServerDhcpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 54 - LAN-Trans DHCP server IP
address. It defaults to the router address as
specified in cabhCdpServerRouter. Alternatively
a vendor may want to separate CDS address from
router address."
DEFVAL { 'c0a80001'h } -- 192.168.0.1
::= { cabhCdpServer 22 }
cabhCdpServerControl OBJECT-TYPE
SYNTAX INTEGER {
restoreConfig(1)
commitConfig (2),
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The control for the CDS (DHCP Server) configuration. All changes to
the cabhCdpServer mib objects are reflected when reading the value of
the mib objects; however, those changes are NOT applied to the running
configuration of the CDS until they are successfully committed via use
of the cabhCdpServerControl object.
If changes are made to the cabhCdpServer mib objects which are not
yet successfully committed to the CDS, the cabhCdpServerControl object
can be used to rollback all changes to the last valid CDS configuration
and discard all intermediate changes.
restoreConfig - Setting cabhCdpServerControl to this value will cause
any changes to the cabhCdpServer objects not yet committed be reset to
the values from the current running configuration of the CDS.
commitConfig – Setting cabhCdpServerControl to this value will cause
the CDS to validate and apply the valid cabhCdpServer mib settings to
its running configuration. The cabhCdpServerCommitStatus object will
detail the status of this operation."
DEFVAL { restoreConfig }
::= { cabhCdpServer 23 }
cabhCdpServerCommitStatus OBJECT-TYPE
SYNTAX INTEGER {
commitSucceeded (1),
commitNeeded (2),
commitFailed (3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the status of committing the current cabhCdpServer mib object
values to the running configuration of the CDS (DHCP Server).
commitSucceeded - indicates the current cabhCdpServer mib object
values are valid and have been successfully committed to the running
configuration of the CDS.
commitNeeded - indicates that the value of one or more objects in
cabhCdpServer mib group have been changed but not yet committed to the
running configuration of the CDS.
commitFailed – indicates the PS was unable to commit the cabhCdpServer
mib object values to the running configuration of the CDS due to
conflicts in those values."
DEFVAL { commitSucceeded }
::= { cabhCdpServer 24 }
--
-- notification group is for future extension.
--
cabhCdpNotification OBJECT IDENTIFIER ::= { cabhCdpMib 2 0 }
cabhCdpConformance OBJECT IDENTIFIER ::= { cabhCdpMib 3 }
cabhCdpCompliances OBJECT IDENTIFIER ::= { cabhCdpConformance 1 }
cabhCdpGroups OBJECT IDENTIFIER ::= { cabhCdpConformance 2 }
--
-- Notification Group
--
-- compliance statements
cabhCdpBasicCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices that implement
MTA feature."
MODULE --cabhCdpMib
-- unconditionally mandatory groups
MANDATORY-GROUPS {
cabhCdpGroup
}
::= { cabhCdpCompliances 3 }
cabhCdpGroup OBJECT-GROUP
OBJECTS {
cabhCdpSetToFactory,
cabhCdpLanTransCurCount,
cabhCdpLanTransThreshold,
cabhCdpLanTransAction,
cabhCdpWanDataIpAddrCount,
cabhCdpLanAddrClientID,
cabhCdpLanAddrLeaseCreateTime,
cabhCdpLanAddrLeaseExpireTime,
cabhCdpLanAddrMethod,
cabhCdpLanAddrHostName,
cabhCdpLanAddrRowStatus,
cabhCdpWanDataAddrClientId,
cabhCdpWanDataAddrIpType,
cabhCdpWanDataAddrIp,
cabhCdpWanDataAddrRenewalTime,
cabhCdpWanDataAddrRowStatus,
cabhCdpWanDnsServerIpType,
cabhCdpWanDnsServerIp,
cabhCdpLanPoolStartType,
cabhCdpLanPoolStart,
cabhCdpLanPoolEndType,
cabhCdpLanPoolEnd,
cabhCdpServerNetworkNumberType,
cabhCdpServerNetworkNumber,
cabhCdpServerSubnetMaskType,
cabhCdpServerSubnetMask,
cabhCdpServerTimeOffset,
cabhCdpServerRouterType,
cabhCdpServerRouter,
cabhCdpServerDnsAddressType,
cabhCdpServerDnsAddress,
cabhCdpServerSyslogAddressType,
cabhCdpServerSyslogAddress,
cabhCdpServerDomainName,
cabhCdpServerTTL,
cabhCdpServerInterfaceMTU,
cabhCdpServerVendorSpecific,
cabhCdpServerLeaseTime,
cabhCdpServerDhcpAddressType,
cabhCdpServerDhcpAddress,
cabhCdpServerControl,
cabhCdpServerCommitStatus
}
STATUS current
DESCRIPTION
"Group of objects for CableHome CDP MIB."
::= { cabhCdpGroups 1 }
END