-- MIB module extracted from ITU-T J.191 (07/2002)
CABH-CDP-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
Unsigned32,
TruthValue,
TimeStamp,
RowStatus,
TEXTUAL-CONVENTION
FROM SNMPv2-TC
OBJECT-GROUP,
MODULE-COMPLIANCE
FROM SNMPv2-CONF
InetAddressType,
InetAddress,
InetAddressIPv4,
InetAddressIPv6
FROM INET-ADDRESS-MIB
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- RFC2571
clabProjCableHome
FROM CLAB-DEF-MIB;
--==========================================================================
--
-- History:
--
-- Date Modified by Reason
--
--
--==========================================================================
cabhCdpMib MODULE-IDENTITY
LAST-UPDATED "0209200000Z" -- September 20, 2002
ORGANIZATION "CableLabs Broadband Access Department"
CONTACT-INFO
"Kevin Luehrs
Postal: Cable Television Laboratories, Inc.
400 Centennial Parkway
Louisville, Colorado 80027-1266
U.S.A.
Phone: +1 303-661-9100
Fax: +1 303-661-9199
E-mail: k.luehrs@cablelabs.com"
DESCRIPTION
"This MIB module supplies the basic management objects
for the Cable DHCP Portal (CDP) portion of the PS database."
::= { clabProjCableHome 4 }
-- Textual conventions
CabhCdpLanTransDhcpClientId ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"LAN-Trans DHCP option61 information."
SYNTAX OCTET STRING (SIZE (1..80))
cabhCdpObjects OBJECT IDENTIFIER ::= { cabhCdpMib 1 }
cabhCdpBase OBJECT IDENTIFIER ::= { cabhCdpObjects 1 }
cabhCdpAddr OBJECT IDENTIFIER ::= { cabhCdpObjects 2 }
cabhCdpServer OBJECT IDENTIFIER ::= { cabhCdpObjects 3 }
--
-- The following group describes the base objects in the Cable
-- DHCP Portal. The rest of this group deals addresses defined on
-- the LAN side.
--
cabhCdpSetToFactory OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to true(1) causes the DHCP default
options to be returned back to factory defaults
and all current mappings to use the factory default settings at
the next lease renewal time. Reading this object
always returns false(2). When cabhCdpSetToFactory is set to true,
the following actions occur:
1. Reset all default CDS DHCP options to the factory defaults.
2. The CDS will offer the factory default DHCP options
at the next lease renewal time.
The objects set to factory defaults are:
cabhCdpLanTransThreshold,
cabhCdpLanTransAction,
cabhCdpWanDataIpAddrCount,
cabhCdpLanStartType,
cabhCdpLanPoolStart,
cabhCdpLanPoolEndType,
cabhCdpLanPoolEnd,
cabhCdpNetworkNumber,
cabhCdpServerSubnetMaskType,
cabhCdpServerSubnetMask,
cabhCdpServerTimeOffset,
cabhCdpServerRouterType,
cabhCdpServerRouter,
cabhCdpServerDnsAddressType,
cabhCdpServerDnsAddress,
cabhCdpServerSyslogAddressType,
cabhCdpServerSyslogAddress,
cabhCdpServerDomainName,
cabhCdpServerTTL,
cabhCdpServerInterfaceMTU,
cabhCdpServerVendorSpecific,
cabhCdpServerLeaseTime,
cabhCdpServerDhcpAddressType,
cabhCdpServerDhcpAddress"
REFERENCE
""
::= { cabhCdpBase 1 }
cabhCdpLanTransCurCount OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current number of LAN-Trans IP addresses for
Translated addresses (NAT and NAPT Interconnects).
This is a count of LAN side addresses."
REFERENCE
""
::= { cabhCdpBase 2 }
cabhCdpLanTransThreshold OBJECT-TYPE
SYNTAX INTEGER (0..65533)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The threshold number of LAN-Trans IP addresses allocated or
assigned above which the PS generates an alarm condition.
Whenever an attempt is made to allocate a LAN-Trans IP address
when cabhCdpLanTransCurCount is greater than or equal to
cabhCdpLanTransThreshold, an event is generated. A value of 0
indicates that the CDP sets the threshold at the highest number of
addresses in the LAN address pool."
DEFVAL { 0 }
::= { cabhCdpBase 3 }
cabhCdpLanTransAction OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
noAssignment (2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The action taken when the CDS assigns a LAN-Trans address
and the number of LAN-Trans addresses assigned
(cabhCdpLanTransCurCount) is greater than the threshold
(cabhCdpLanTransThreshold) The actions are as follows:
normal - assign a LAN-Trans IP address and treat the
interconnection between the LAN and WAN as would normally
occur if the threshold was not exceeded.
noAssignment - do not assign a LAN-Trans IP address and do
not create an interconnection"
REFERENCE
""
DEFVAL { normal }
::= { cabhCdpBase 4 }
cabhCdpWanDataIpAddrCount OBJECT-TYPE
SYNTAX INTEGER ( 0..63 )
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is the number of WAN-Data IP addresses that the CDC needs
to acquire via DHCP."
REFERENCE
""
DEFVAL { 0 }
::= { cabhCdpBase 5 }
--
-- CDP Address Management Tables
--
--========================================================================
--
-- cabhCdpLanAddrTable (CDP LAN Address Table)
--
-- The cabhCdpLanAddrTable contains the DHCP parameters
-- for each IP address served to the LAN-Trans realm.
--
-- This table contains a list of entries for the LAN side CDP parameters. These parameters can be set
-- either by the CDP or by the cable operator through the CMP.
--
--=========================================================================
cabhCdpLanAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF CabhCdpLanAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is a list of LAN-Trans realm parameters. This
list has one entry for each allocated LAN-Trans IP address."
::= { cabhCdpAddr 1 }
cabhCdpLanAddrEntry OBJECT-TYPE
SYNTAX CabhCdpLanAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of general parameter for CDP mappings."
INDEX { cabhCdpLanAddrIpType, cabhCdpLanAddrIp }
::= { cabhCdpLanAddrTable 1 }
CabhCdpLanAddrEntry ::= SEQUENCE {
cabhCdpLanAddrIpType InetAddressType,
cabhCdpLanAddrIp InetAddress,
cabhCdpLanAddrClientID CabhCdpLanTransDhcpClientId,
cabhCdpLanAddrLeaseCreateTime TimeStamp,
cabhCdpLanAddrLeaseExpireTime TimeStamp,
cabhCdpLanAddrMethod INTEGER,
cabhCdpLanAddrHostName SnmpAdminString,
cabhCdpLanAddrRowStatus RowStatus
}
cabhCdpLanAddrIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address type assigned on the LAN side for the CDP Address
Table."
DEFVAL { ipv4 }
::= { cabhCdpLanAddrEntry 1 }
cabhCdpLanAddrIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The address assigned on the LAN side for the CDP Address
Table. This parameter is entered by the CDP when the CDS
grants a lease to a LAN IP Device in the LAN-Trans realm
and creates a row in this table. Alternatively, this parameter
can be created by the NMS through the CMP, when the NMS creates
a new DHCP address reservation by accessing the
cabhCdpLanAddrRowStatus object with an index comprised of
a new cabhCadpLanAddrIp and its Type."
::= { cabhCdpLanAddrEntry 2 }
cabhCdpLanAddrClientID OBJECT-TYPE
SYNTAX CabhCdpLanTransDhcpClientId
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The client ID as indicated in Option 61 of the DHCP Discover.
There is a one-to-one relationship between the Client ID and the
assigned LAN address. This parameter is entered by the CDP when
the CDS grants a lease to a LAN IP Device in the LANpTrans realm
and creates a row in this table. Alternatively, this parameter
can be created by the NMS through the CMP, when the NMS creates
a new DHCP address reservation by accessing the
cabhCdpLanDataAddrRowStatus object with an index comprised of a new
cabhCdpLanAddrIp and a new cabhCdpLanAddrClientID."
::= { cabhCdpLanAddrEntry 3 }
cabhCdpLanAddrLeaseCreateTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time the LAN side of the CDP LAN Table was created.
This entry is only set the cabhCdpLanAddrTable entry is created
and the entry does not already exist. In other words, this value
is not overwritten at lease renewal time."
::= { cabhCdpLanAddrEntry 4 }
cabhCdpLanAddrLeaseExpireTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the time that the LAN side lease expires. When
the lease expires this entry will be deleted from the table."
::= { cabhCdpLanAddrEntry 5 }
cabhCdpLanAddrMethod OBJECT-TYPE
SYNTAX INTEGER {
cmp (1),
cdp (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The method that created this Address Entry. cmp
indicates that configuration through the CMP established this
row (entry). cdp indicates that a DHCP discover established
this row (entry)."
::= { cabhCdpLanAddrEntry 6 }
cabhCdpLanAddrHostName OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..80))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the Host Name of the LAN IP address, based on DCHP option 12."
::= { cabhCdpLanAddrEntry 7 }
cabhCdpLanAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus interlock for creation and deletion."
::= { cabhCdpLanAddrEntry 8 }
--========================================================================
--
-- cabhCdpWanDataAddrTable (CDP WAN-Data Address Table)
--
-- The cabhCdpWanDataAddrTable contains the configuration or DHCP parameters
-- for each IP address mapping per WAN-Data IP Address.
--
--=========================================================================
cabhCdpWanDataAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF CabhCdpWanDataAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains WAN-Data address realm information."
::= { cabhCdpAddr 2 }
cabhCdpWanDataAddrEntry OBJECT-TYPE
SYNTAX CabhCdpWanDataAddrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of general parameter for CDP WAN-Data address realm."
INDEX { cabhCdpWanDataAddrIndex }
::= { cabhCdpWanDataAddrTable 1 }
CabhCdpWanDataAddrEntry ::= SEQUENCE {
cabhCdpWanDataAddrIndex INTEGER,
cabhCdpWanDataAddrClientId OCTET STRING,
cabhCdpWanDataAddrIpType InetAddressType,
cabhCdpWanDataAddrIp InetAddress,
cabhCdpWanDataAddrRenewalTime Integer32,
cabhCdpWanDataAddrRowStatus RowStatus
}
cabhCdpWanDataAddrIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index into table."
::= { cabhCdpWanDataAddrEntry 1 }
cabhCdpWanDataAddrClientId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..80))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A unique WAN-Data ClientID used when attempting
the acquire a WAN-Data IP Address via DHCP."
::= { cabhCdpWanDataAddrEntry 2 }
cabhCdpWanDataAddrIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address type assigned on the WAN-Data side."
DEFVAL { ipv4 }
::= { cabhCdpWanDataAddrEntry 3 }
cabhCdpWanDataAddrIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The address assigned on the WAN-Data side."
::= { cabhCdpWanDataAddrEntry 4 }
cabhCdpWanDataAddrRenewalTime OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the time remaining before the lease expires.
This is based on DHCP Option 51."
::= { cabhCdpWanDataAddrEntry 5 }
cabhCdpWanDataAddrRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus interlock for creation and deletion."
::= { cabhCdpWanDataAddrEntry 6 }
--========================================================================
--
-- cabhCdpWanDataAddrServerTable (CDP WAN-Data DNS Server Table)
--
-- The cabhCdpWanDataAddrServerTable contains a table of referral DNS Servers.
--
--=========================================================================
cabhCdpWanDataAddrServerTable OBJECT-TYPE
SYNTAX SEQUENCE OF CabhCdpWanDataAddrServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This contains the IP addresses used for the WAN-Data DNS hosts
obtained via the DHCP option 6 during the WAN-Data process."
::= { cabhCdpAddr 3 }
cabhCdpWanDataAddrServerEntry OBJECT-TYPE
SYNTAX CabhCdpWanDataAddrServerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of WAN-Data DNS Hosts."
INDEX { cabhCdpWanDataAddrDnsIpType, cabhCdpWanDataAddrDnsIp }
::= { cabhCdpWanDataAddrServerTable 1 }
CabhCdpWanDataAddrServerEntry ::= SEQUENCE {
cabhCdpWanDataAddrDnsIpType InetAddressType,
cabhCdpWanDataAddrDnsIp InetAddress,
cabhCdpWanDataAddrDnsRowStatus RowStatus
}
cabhCdpWanDataAddrDnsIpType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This parameter indicates the IP address type of a DNS server."
DEFVAL { ipv4 }
::= { cabhCdpWanDataAddrServerEntry 1 }
cabhCdpWanDataAddrDnsIp OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This parameter indicates the IP address of a DNS server."
::= { cabhCdpWanDataAddrServerEntry 2 }
cabhCdpWanDataAddrDnsRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The RowStatus interlock for creation and deletion."
::= { cabhCdpWanDataAddrServerEntry 3 }
--
-- DHCP Server Side (CDS) Option Values for the LAN-Trans realm
--
cabhCdpLanPoolStartType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Address type of the start of range LAN Trans IP Addresses."
DEFVAL { ipv4 }
::= { cabhCdpServer 1 }
cabhCdpLanPoolStart OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start of range LAN Trans IP Addresses."
DEFVAL { 'c0a8000a'h } -- 192.168.0.10
-- 192.168.0.0 is the network number
-- 192.168.0.255 is broadcast
-- address and 192.168.0.1
-- is reserved for the router
::= { cabhCdpServer 2 }
cabhCdpLanPoolEndType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Address type of the end of range LAN Trans IP Addresses."
DEFVAL { ipv4 }
::= { cabhCdpServer 3 }
cabhCdpLanPoolEnd OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The end of range for LAN-Trans IP Addresses."
DEFVAL { 'c0a800fe'h } -- 192.168.0.254
::= { cabhCdpServer 4 }
cabhCdpServerNetworkNumberType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP address type of the LAN-Trans network number."
DEFVAL { ipv4 }
::= { cabhCdpServer 5 }
cabhCdpServerNetworkNumber OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The LAN-Trans network number."
DEFVAL { 'c0a80000'h }
::= { cabhCdpServer 6 }
cabhCdpServerSubnetMaskType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of LAN-Trans Subnet Mask."
DEFVAL { ipv4 }
::= { cabhCdpServer 7 }
cabhCdpServerSubnetMask OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 1 - Value of LAN-Trans Subnet Mask."
DEFVAL { 'ffffff00'h } -- 255.255.255.0
::= { cabhCdpServer 8 }
cabhCdpServerTimeOffset OBJECT-TYPE
SYNTAX Integer32 (-86400..86400) -- 0 to 24 hours (in seconds)
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 2 - Value of LAN-Trans Time Offset from
Coordinated Universal Time (UTC)."
DEFVAL { 0 } -- UTC
::= { cabhCdpServer 9 }
cabhCdpServerRouterType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Type of Address, Router for the LAN-Trans address realm."
DEFVAL { ipv4 }
::= { cabhCdpServer 10 }
cabhCdpServerRouter OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 3 - Router for the LAN-Trans address realm."
DEFVAL { 'c0a80001'h } -- 192.168.0.1
::= { cabhCdpServer 11 }
cabhCdpServerDnsAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Type of IP Addresses of the LAN-Trans address realm
DNS servers."
DEFVAL { ipv4 }
::= { cabhCdpServer 12 }
cabhCdpServerDnsAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Addresses of the LAN-Trans address realm
DNS servers. As a default there is only one DNS
server and it is the address specified in Option
Value 3 - cabhCdpServerRouter. Only one address
is specified."
DEFVAL { 'c0a80001'h } -- 192.168.0.1
::= { cabhCdpServer 13 }
cabhCdpServerSyslogAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The Type of IP Address of the LAN-Trans SYSLOG servers."
DEFVAL { ipv4 }
::= { cabhCdpServer 14 }
cabhCdpServerSyslogAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The IP Addresses of the LAN-Trans SYSLOG servers.
As a default there are no SYSLOG Servers.
The factory defaults contains the indication of
no Syslog Server value equals (0.0.0.0)."
DEFVAL { '00000000'h } -- 0.0.0.0
::= { cabhCdpServer 15 }
cabhCdpServerDomainName OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE(0..128))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 15 - Domain name of LAN-Trans address realm."
DEFVAL {""}
::= { cabhCdpServer 16 }
cabhCdpServerTTL OBJECT-TYPE
SYNTAX INTEGER (0..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 23 - LAN-Trans Time to Live."
DEFVAL { 64 }
::= { cabhCdpServer 17 }
cabhCdpServerInterfaceMTU OBJECT-TYPE
SYNTAX INTEGER (68..4096)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 26 - LAN-Trans Interface MTU."
::= { cabhCdpServer 18 }
cabhCdpServerVendorSpecific OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 43 - Vendor Specific Options."
DEFVAL { ''h }
::= { cabhCdpServer 19 }
cabhCdpServerLeaseTime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 51 -Lease Time for LAN IP Devices
in the LAN-Trans realm (seconds)."
DEFVAL { 3600 }
::= { cabhCdpServer 20 }
cabhCdpServerDhcpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 54 - Type of LAN-Trans DHCP server IP address."
DEFVAL { ipv4 }
::= { cabhCdpServer 21 }
cabhCdpServerDhcpAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Option value 54 - LAN-Trans DHCP server IP
address. It defaults to the router address as
specified in cabhCdpServerRouter. Alternatively
a vendor may want to separate CDS address from
router address."
DEFVAL { 'c0a80001'h } -- 192.168.0.1
::= { cabhCdpServer 22 }
--
-- notification group is for future extension.
--
cabhCdpNotification OBJECT IDENTIFIER ::= { cabhCdpMib 2 }
cabhCdpConformance OBJECT IDENTIFIER ::= { cabhCdpMib 3 }
cabhCdpCompliances OBJECT IDENTIFIER ::= { cabhCdpConformance 1 }
cabhCdpGroups OBJECT IDENTIFIER ::= { cabhCdpConformance 2 }
--
-- Notification Group
--
-- compliance statements
cabhCdpBasicCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices that implement
MTA feature."
MODULE --cabhCdpMib
-- unconditionally mandatory groups
MANDATORY-GROUPS { cabhCdpGroup}
::= { cabhCdpCompliances 3 }
cabhCdpGroup OBJECT-GROUP
OBJECTS {
cabhCdpSetToFactory,
cabhCdpLanTransCurCount,
cabhCdpLanTransThreshold,
cabhCdpLanTransAction,
cabhCdpWanDataIpAddrCount,
cabhCdpLanAddrClientID,
cabhCdpLanAddrLeaseCreateTime,
cabhCdpLanAddrLeaseExpireTime,
cabhCdpLanAddrMethod,
cabhCdpLanAddrHostName,
cabhCdpLanAddrRowStatus,
cabhCdpWanDataAddrClientId,
cabhCdpWanDataAddrIp,
cabhCdpWanDataAddrRenewalTime,
cabhCdpWanDataAddrRowStatus,
cabhCdpWanDataAddrDnsRowStatus,
cabhCdpLanPoolStartType,
cabhCdpLanPoolStart,
cabhCdpLanPoolEndType,
cabhCdpLanPoolEnd,
cabhCdpServerNetworkNumberType,
cabhCdpServerNetworkNumber,
cabhCdpServerSubnetMaskType,
cabhCdpServerSubnetMask,
cabhCdpServerTimeOffset,
cabhCdpServerRouterType,
cabhCdpServerRouterType,
cabhCdpServerRouter,
cabhCdpServerDnsAddressType,
cabhCdpServerDnsAddress,
cabhCdpServerSyslogAddressType,
cabhCdpServerSyslogAddress,
cabhCdpServerDomainName,
cabhCdpServerTTL,
cabhCdpServerInterfaceMTU,
cabhCdpServerVendorSpecific,
cabhCdpServerLeaseTime,
cabhCdpServerDhcpAddressType,
cabhCdpServerDhcpAddress
}
STATUS current
DESCRIPTION
"Group of objects for Cable CDP MIB."
::= { cabhCdpGroups 1 }
END