-- MIB module extracted from ITU-T J.169 (03/2001)
PKTC-SIG-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32,
BITS
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,
RowStatus,
DisplayString,
TruthValue
FROM SNMPv2-TC
OBJECT-GROUP,
MODULE-COMPLIANCE
FROM SNMPv2-CONF
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
clabProjPacketCable
FROM CLAB-DEF-MIB
ifIndex
FROM IF-MIB;
pktcSigMib MODULE-IDENTITY
LAST-UPDATED "200006260000Z" -- June 26, 2000
ORGANIZATION "IPCablecom OSS Group"
CONTACT-INFO ""
DESCRIPTION
"This MIB module supplies the basic management
object for the PacketCable Signalling
protocols. This version of the MIB includes
common signalling and Network Call Signalling
(NCS) related signalling objects."
::= { clabProjPacketCable 2 }
-- Textual Conventions
PktcCodecType ::= TEXTUAL-CONVENTION STATUS current
DESCRIPTION "These are the various types of codecs that May be supported."
SYNTAX INTEGER {
other (1),
unknown (2),
g729 (3),
g729a (4),
g729e (5),
g711mu (6),
g726 (7),
g728 (8),
g711a (9)
}
PktcRingCadence ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"These are the ring cadence durations that are
supported. 200 ms for each interval. Each interval is
represented by one bit. 0 is no tone, 1 is tone."
SYNTAX BITS {
interval1 (0),
interval2 (1),
interval3 (2),
interval4 (3),
interval5 (4),
interval6 (5),
interval7 (6),
interval8 (7),
interval9 (8),
interval10 (9),
interval11 (10),
interval12 (11),
interval13 (12),
interval14 (13),
interval15 (14),
interval16 (15),
interval17 (16),
interval18 (17),
interval19 (18),
interval20 (19),
interval21 (20),
interval22 (21),
interval23 (22),
interval24 (23),
interval25 (24),
interval26 (25),
interval27 (26),
interval28 (27),
interval29 (28),
interval30 (29)
}
PktcSigType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION "These are the various types of signalling that
may be supported.
ncs - network call signalling a derivation of
MGCP (Media Gateway Control Protocol)
version 1.0
dcs - distributed call signalling a derivation
of SIP (Session Initiation Protocol)
RFC 2543"
SYNTAX INTEGER {
other(1),
unknown(2),
ncs(3),
dcs(4)
}
pktcSigMibObjects OBJECT IDENTIFIER ::= { pktcSigMib 1 }
pktcSigDevConfigObjects OBJECT IDENTIFIER ::= { pktcSigMibObjects 1 }
pktcNcsEndPntConfigObjects OBJECT IDENTIFIER ::= { pktcSigMibObjects 2 }
pktcSigEndPntConfigObjects OBJECT IDENTIFIER ::= { pktcSigMibObjects 3 }
pktcDcsEndPntConfigObjects OBJECT IDENTIFIER ::= { pktcSigMibObjects 4 }
--
-- The pktcSigDevCodecTable defines the codecs supported by this
-- Media Terminal Adapter (MTA). There is one entry for each
-- codecs supported.
--
pktcSigDevCodecTable OBJECT-TYPE
SYNTAX SEQUENCE OF PktcSigDevCodecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the MTA supported codec types."
::= { pktcSigDevConfigObjects 1 }
pktcSigDevCodecEntry OBJECT-TYPE
SYNTAX PktcSigDevCodecEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of supported codecs types for the MTA."
INDEX { pktcSigDevCodecIndex }
::= { pktcSigDevCodecTable 1 }
PktcSigDevCodecEntry ::= SEQUENCE {
pktcSigDevCodecIndex INTEGER,
pktcSigDevCodecType PktcCodecType
}
pktcSigDevCodecIndex OBJECT-TYPE
SYNTAX INTEGER (1..16383)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value which uniquely identifies an entry
in the pktcSigDevCodecTable."
::= { pktcSigDevCodecEntry 1 }
pktcSigDevCodecType OBJECT-TYPE
SYNTAX PktcCodecType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A codec type supported by this MTA."
::= { pktcSigDevCodecEntry 2 }
--
-- These are the common signalling related definitions that affect the
-- entire MTA device.
--
pktcSigDevEchoCancellation OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies if the device is capable
of echo cancellation."
::= { pktcSigDevConfigObjects 2 }
pktcSigDevSilenceSuppression OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies if the device is capable of
silence suppression (Voice Activity Detection)."
::= { pktcSigDevConfigObjects 3 }
pktcSigDevConnectionMode OBJECT-TYPE
SYNTAX BITS {
voice(0),
fax(1),
modem(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the connection modes that the
MTA device can support."
::= { pktcSigDevConfigObjects 4 }
--
-- In the United States Ring Cadences 0, 6, and 7 are custom
-- ring cadences definable by the user. The following three
-- objects are used for these definitions.
--
pktcSigDevR0Cadence OBJECT-TYPE
SYNTAX PktcRingCadence
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies ring cadence 0 (a user-defined
field) where each bit (least significant bit)
represents a duration of 200 milliseconds (6 seconds
total)."
::= { pktcSigDevConfigObjects 5 }
pktcSigDevR6Cadence OBJECT-TYPE
SYNTAX PktcRingCadence
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies ring cadence 6 (a user-defined
field) where each bit (least significant bit)
represents a duration of 200 milliseconds (6 seconds
total)."
::= { pktcSigDevConfigObjects 6 }
pktcSigDevR7Cadence OBJECT-TYPE
SYNTAX PktcRingCadence
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object specifies ring cadence 7 (a user-defined
field) where each bit (least significant bit)
represents a duration of 200 milliseconds (6 seconds
total)."
::= { pktcSigDevConfigObjects 7 }
pktcSigDefCallSigTos OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default value used in the IP header for setting the
Type of Service (TOS) value for call signalling."
REFERENCE
"Refer to 6.4.2 of ITU-T Recommendation J.162"
DEFVAL { 0 }
::= { pktcSigDevConfigObjects 8 }
pktcSigDefMediaStreamTos OBJECT-TYPE
SYNTAX Integer32 (0..63)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The default value used in the IP header for setting
the Type of Service (TOS) value for media stream packets."
REFERENCE
"Refer to 6.4.2 of ITU-T Recommendation J.162"
DEFVAL { 0 }
::= { pktcSigDevConfigObjects 9 }
pktcSigTosFormatSelector OBJECT-TYPE
SYNTAX INTEGER {
ipv4TOSOctet(1),
dscpCodepoint(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The format of the default signalling and media
Type of Service (TOS) values."
::= { pktcSigDevConfigObjects 10 }
--
-- pktcSigCapabilityTable - This table defines the valid signalling
-- types supported by this MTA.
--
pktcSigCapabilityTable OBJECT-TYPE
SYNTAX SEQUENCE OF PktcSigCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the signalling types
by this MTA."
::= { pktcSigDevConfigObjects 11 }
pktcSigCapabilityEntry OBJECT-TYPE
SYNTAX PktcSigCapabilityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries in pktcMtaDevSigCapabilityTable -
List of supported signalling types, versions
and vendor extensions for this MTA. Each
entry in the list provides for one signalling
type and version combination. If the device
supports multiple versions of the same
signalling type - it will require mutiple
entries."
INDEX { pktcSignallingIndex }
::= { pktcSigCapabilityTable 1 }
PktcSigCapabilityEntry ::= SEQUENCE {
pktcSignallingIndex INTEGER,
pktcSignallingType PktcSigType,
pktcSignallingVersion SnmpAdminString,
pktcSignallingVendorExtension SnmpAdminString
}
pktcSignallingIndex OBJECT-TYPE
SYNTAX INTEGER (1..16383)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index value which uniquely identifies
an entry in the pktcSigCapabilityTable."
::= { pktcSigCapabilityEntry 1 }
pktcSignallingType OBJECT-TYPE
SYNTAX PktcSigType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Type indentifies the type of signalling
used, this can be NCS, DCS, etc. This value
has to be associated with a single signalling
version - reference pktcMtaDevSignallingVersion."
::= { pktcSigCapabilityEntry 2 }
pktcSignallingVersion OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the version of the signalling type -
reference pktcSignallingType. Exmaples
would be 1.0 or 2.33 etc."
::= { pktcSigCapabilityEntry 3 }
pktcSignallingVendorExtension OBJECT-TYPE
SYNTAX SnmpAdminString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor extension allows vendors to
provide a list of additional capabilities,
vendors can decide how to encode these
Extensions, although space separated text is
suggested."
::= { pktcSigCapabilityEntry 4 }
--
-- The following table will provide endpoint configuration
-- information that is common to all signalling Protocols.
-- Currently only the signalling index is present in an effort
-- not to deprecate any MIB objects.
--
pktcSigEndPntConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF PktcSigEndPntConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the packet cable
EndPoint selected signalling type. The number of
entries in this table represents the
number of provisioned end points.
For each conceptual row of pktcSigEndPntConfigTable
defined, an associated row MUST be defined in one
on the specific signalling tables such as
pktcNcsEndPntConfigTable."
::= { pktcSigEndPntConfigObjects 1 }
pktcSigEndPntConfigEntry OBJECT-TYPE
SYNTAX PktcSigEndPntConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries in pktcSigEndPntConfigTable -
Each entry describes what signalling type
a particular endpoint uses."
INDEX { ifIndex }
::= { pktcSigEndPntConfigTable 1 }
PktcSigEndPntConfigEntry ::= SEQUENCE {
pktcSigEndPntCapabilityIndex INTEGER
}
pktcSigEndPntCapabilityIndex OBJECT-TYPE
SYNTAX INTEGER (1..16383)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The associated index value in
the pktcSigCapablityTable."
::= { pktcSigEndPntConfigEntry 1 }
--
-- The NCS End Point Config Table is used to define attributes that
-- are specific to connection EndPoints.
--
--
pktcNcsEndPntConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF PktcNcsEndPntConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table describes the packet cable NCS EndPoint
configuration. The number of entries in this table
represents the number of provisioned NCS endpoints."
::= { pktcNcsEndPntConfigObjects 1}
pktcNcsEndPntConfigEntry OBJECT-TYPE
SYNTAX PktcNcsEndPntConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"List of attributes for a single packet cable endpoint
interface."
INDEX { ifIndex }
::= { pktcNcsEndPntConfigTable 1 }
PktcNcsEndPntConfigEntry ::= SEQUENCE {
pktcNcsEndPntConfigCallAgentId DisplayString,
pktcNcsEndPntConfigCallAgentUdpPort INTEGER,
pktcNcsEndPntConfigPartialDialTO INTEGER,
pktcNcsEndPntConfigCriticalDialTO INTEGER,
pktcNcsEndPntConfigBusyToneTO INTEGER,
pktcNcsEndPntConfigDialToneTO INTEGER,
pktcNcsEndPntConfigMessageWaitingTO INTEGER,
pktcNcsEndPntConfigOffHookWarnToneTO INTEGER,
pktcNcsEndPntConfigRingingTO INTEGER,
pktcNcsEndPntConfigRingBackTO INTEGER,
pktcNcsEndPntConfigReorderToneTO INTEGER,
pktcNcsEndPntConfigStutterDialToneTO INTEGER,
pktcNcsEndPntConfigTSMax INTEGER,
pktcNcsEndPntConfigMax1 INTEGER,
pktcNcsEndPntConfigMax2 INTEGER,
pktcNcsEndPntConfigMax1QEnable TruthValue,
pktcNcsEndPntConfigMax2QEnable TruthValue,
pktcNcsEndPntConfigMWD INTEGER,
pktcNcsEndPntConfigTdinit INTEGER,
pktcNcsEndPntConfigTdmin INTEGER,
pktcNcsEndPntConfigTdmax INTEGER,
pktcNcsEndPntConfigRtoMax INTEGER,
pktcNcsEndPntConfigRtoInit INTEGER,
pktcNcsEndPntConfigLongDurationKeepAlive INTEGER,
pktcNcsEndPntConfigThist INTEGER,
pktcNcsEndPntConfigStatus RowStatus
}
pktcNcsEndPntConfigCallAgentId OBJECT-TYPE
SYNTAX DisplayString(SIZE (0..255))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains a string indicating the call agent name.
The call agent name can be a fully qualified domain name or
an IP address. Refer to RFC 821 for details."
::= { pktcNcsEndPntConfigEntry 1 }
pktcNcsEndPntConfigCallAgentUdpPort OBJECT-TYPE
SYNTAX INTEGER (1025..65535)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the call agent User Datagram Protocol
(UDP) port that is being used for this instance of call
signalling."
REFERENCE
"Refer to 7.2.1.3 of ITU-T Recommendation J.162"
DEFVAL { 2427 }
::= { pktcNcsEndPntConfigEntry 2 }
pktcNcsEndPntConfigPartialDialTO OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains maximum value of the partial
dial time out."
REFERENCE
"Refer to Annex A of ITU-T Recommendation J.162"
DEFVAL { 16 }
::= { pktcNcsEndPntConfigEntry 3 }
pktcNcsEndPntConfigCriticalDialTO OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the maximum value of the critical
dial time out."
REFERENCE
"Refer to Annex A of ITU-T Recommendation J.162"
DEFVAL { 4 }
::= { pktcNcsEndPntConfigEntry 4 }
pktcNcsEndPntConfigBusyToneTO OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the time-out value for busy tone."
REFERENCE
"Refer to Annex A of ITU-T Recommendation J.162"
DEFVAL { 30 }
::= { pktcNcsEndPntConfigEntry 5 }
pktcNcsEndPntConfigDialToneTO OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the time-out value for dial tone."
REFERENCE
"Refer to Annex A of ITU-T Recommendation J.162"
DEFVAL { 16 }
::= { pktcNcsEndPntConfigEntry 6 }
pktcNcsEndPntConfigMessageWaitingTO OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the time-out value for message
waiting indicator."
REFERENCE
"Refer to Annex A of ITU-T Recommendation J.162"
DEFVAL { 16 }
::= { pktcNcsEndPntConfigEntry 7 }
pktcNcsEndPntConfigOffHookWarnToneTO OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the time-out value for
the off hook Warning tone."
REFERENCE
"Refer to Annex A of ITU-T Recommendation J.162"
DEFVAL { 0 }
::= { pktcNcsEndPntConfigEntry 8 }
pktcNcsEndPntConfigRingingTO OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the time-out value for ringing."
REFERENCE
"Refer to Annex A of ITU-T Recommendation J.162"
DEFVAL { 180 }
::= { pktcNcsEndPntConfigEntry 9 }
pktcNcsEndPntConfigRingBackTO OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the time-out value for ring back."
REFERENCE
"Refer to Annex A of ITU-T Recommendation J.162"
DEFVAL { 180 }
::= { pktcNcsEndPntConfigEntry 10 }
pktcNcsEndPntConfigReorderToneTO OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the time-out value for reorder tone."
REFERENCE
"Refer to Annex A of ITU-T Recommendation J.162"
DEFVAL { 30 }
::= { pktcNcsEndPntConfigEntry 11 }
pktcNcsEndPntConfigStutterDialToneTO OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the timeout value for stutter dial tone."
REFERENCE
"Refer to Annex A of ITU-T Recommendation J.162"
DEFVAL { 16 }
::= { pktcNcsEndPntConfigEntry 12 }
pktcNcsEndPntConfigTSMax OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the max time in seconds since the
sending of the initial datagram."
REFERENCE
"Refer to 6.4.2 of ITU-T Recommendation J.162"
DEFVAL { 20 }
::= { pktcNcsEndPntConfigEntry 13 }
pktcNcsEndPntConfigMax1 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the suspicious error threshold
for signalling messages."
REFERENCE
"Refer to 6.4.2 of ITU-T Recommendation J.162"
DEFVAL { 5 }
::= { pktcNcsEndPntConfigEntry 14 }
pktcNcsEndPntConfigMax2 OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the disconnect error
threshold for signalling messages."
REFERENCE
"Refer to 6.4.2 of ITU-T Recommendation J.162"
DEFVAL { 7 }
::= { pktcNcsEndPntConfigEntry 15 }
pktcNcsEndPntConfigMax1QEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables/disables the Max1 Domain Name
Server (DNS) query operation when Max1 expires."
DEFVAL { true }
::= { pktcNcsEndPntConfigEntry 16 }
pktcNcsEndPntConfigMax2QEnable OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object enables/disables the Max2 DNS query
operation when Max2 expires."
DEFVAL { true }
::= { pktcNcsEndPntConfigEntry 17 }
pktcNcsEndPntConfigMWD OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum Waiting Delay (MWD) contains the maximum
number of seconds a MTA waits after a restart."
REFERENCE
"Refer to 6.4.3.5 of ITU-T Recommendation J.162"
DEFVAL { 600 }
::= { pktcNcsEndPntConfigEntry 18 }
pktcNcsEndPntConfigTdinit OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the initial number of seconds
a MTA waits after a disconnect."
REFERENCE
"Refer to 6.4.3.6 of ITU-T Recommendation J.162"
DEFVAL { 15 }
::= { pktcNcsEndPntConfigEntry 19 }
pktcNcsEndPntConfigTdmin OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the minimum number of seconds a
MTA waits after a disconnect."
REFERENCE
"Refer to 6.4.3.6 of ITU-T Recommendation J.162"
DEFVAL { 15 }
::= { pktcNcsEndPntConfigEntry 20 }
pktcNcsEndPntConfigTdmax OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the maximum number of seconds
a MTA waits after a disconnect."
REFERENCE
"Refer to 6.4.3.6 of ITU-T Recommendation J.162"
DEFVAL { 600 }
::= { pktcNcsEndPntConfigEntry 21 }
pktcNcsEndPntConfigRtoMax OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the maximum number of seconds
for the retansmission timer."
REFERENCE
"Refer to 7.5.2 of ITU-T Recommendation J.162"
DEFVAL { 4 }
::= { pktcNcsEndPntConfigEntry 22 }
pktcNcsEndPntConfigRtoInit OBJECT-TYPE
SYNTAX INTEGER
UNITS "milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the initial number of seconds
for the retransmission timer."
REFERENCE
"Refer to 7.5.2 of ITU-T Recommendation J.162"
DEFVAL { 200 }
::= { pktcNcsEndPntConfigEntry 23 }
pktcNcsEndPntConfigLongDurationKeepAlive OBJECT-TYPE
SYNTAX INTEGER
UNITS "minutes"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Specifies a timeout value in minutes for sending
long duration call notification message."
REFERENCE
"Refer to Annex A of ITU-T Recommendation J.162"
DEFVAL { 60 }
::= { pktcNcsEndPntConfigEntry 24 }
pktcNcsEndPntConfigThist OBJECT-TYPE
SYNTAX INTEGER
UNITS "seconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Timeout period in seconds before no response is declared."
REFERENCE
"Refer to 6.4.2 of ITU-T Recommendation J.162"
DEFVAL { 30 }
::= { pktcNcsEndPntConfigEntry 25 }
pktcNcsEndPntConfigStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object contains the Row Status associated with
the pktsNcsEndPntTable."
::= { pktcNcsEndPntConfigEntry 26 }
--
-- notification group is for future extension.
--
pktcSigNotification OBJECT IDENTIFIER ::= { pktcSigMib 2 }
pktcSigConformance OBJECT IDENTIFIER ::= { pktcSigMib 3 }
pktcSigCompliances OBJECT IDENTIFIER ::= { pktcSigConformance 1 }
pktcSigGroups OBJECT IDENTIFIER ::= { pktcSigConformance 2 }
-- compliance statements
pktcSigBasicCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for devices that implement Signalling
on the MTA."
MODULE -- pktcSigMib
-- unconditionally mandatory groups
MANDATORY-GROUPS {
pktcSigGroup
}
GROUP pktcNcsGroup
DESCRIPTION
"This group is mandatory for any MTA implementing NCS signalling"
::={ pktcSigCompliances 1 }
-- units of conformance
pktcSigGroup OBJECT-GROUP
OBJECTS {
pktcSigDevCodecType,
pktcSigDevEchoCancellation,
pktcSigDevSilenceSuppression,
pktcSigDevConnectionMode,
pktcSigDevR0Cadence,
pktcSigDevR6Cadence,
pktcSigDevR7Cadence,
pktcSigDefCallSigTos,
pktcSigDefMediaStreamTos,
pktcSigTosFormatSelector,
pktcSignallingType,
pktcSignallingVersion,
pktcSignallingVendorExtension,
pktcSigEndPntCapabilityIndex
}
STATUS current
DESCRIPTION
"Group of objects for the common portion of the
IPCablecom Signalling MIB."
::= { pktcSigGroups 1 }
pktcNcsGroup OBJECT-GROUP
OBJECTS {
pktcNcsEndPntConfigCallAgentId,
pktcNcsEndPntConfigCallAgentUdpPort,
pktcNcsEndPntConfigPartialDialTO,
pktcNcsEndPntConfigCriticalDialTO,
pktcNcsEndPntConfigBusyToneTO,
pktcNcsEndPntConfigDialToneTO,
pktcNcsEndPntConfigMessageWaitingTO,
pktcNcsEndPntConfigOffHookWarnToneTO,
pktcNcsEndPntConfigRingingTO,
pktcNcsEndPntConfigRingBackTO,
pktcNcsEndPntConfigReorderToneTO,
pktcNcsEndPntConfigStutterDialToneTO,
pktcNcsEndPntConfigTSMax,
pktcNcsEndPntConfigMax1,
pktcNcsEndPntConfigMax2,
pktcNcsEndPntConfigMax1QEnable,
pktcNcsEndPntConfigMax2QEnable,
pktcNcsEndPntConfigMWD,
pktcNcsEndPntConfigTdinit,
pktcNcsEndPntConfigTdmin,
pktcNcsEndPntConfigTdmax,
pktcNcsEndPntConfigRtoMax,
pktcNcsEndPntConfigRtoInit,
pktcNcsEndPntConfigLongDurationKeepAlive,
pktcNcsEndPntConfigThist,
pktcNcsEndPntConfigStatus
}
STATUS current
DESCRIPTION
"Group of objects for the NCS portion of the
IPCablecom Signalling MIB. This is mandatory for
NCS signalling."
::= { pktcSigGroups 2 }
END