–	Bitstream file name
OLSMultiProfile_A_NHK_2.bit

–	Explanation of bitstream features
The bitstream is coded with two layers, where OLS0 including the lower layer specifies Main 10 profile whereas OLS1 including both layers specifies Multilayer Main 10

–	Profile, tier, and level for the bitstream
Main 10 profile, level 2.1 and Main tier for base layer (L0). Multilayer Main 10 profile, Level 3.0 and Main tier for enhancement layer (L1).

–	Max picture width and height, and any additional picture width and height values used (i.e., for reference picture resample or scalability)  
Resolution: 416x240

–	Picture rate 
frame rate: 60

–	VTM decoder release version number able to correctly decode the bitstream with identical output, or description of VTM decoder incompatibility (preferably including a corresponding error tracking issue number.) 
The bitstream could be decoded using VVC software, tagged "VTM-23.0" in https://vcgit.hhi.fraunhofer.de/jvet/VVCSoftware_VTM. 

–	VTM release version number used to generate the bitstream, if applicable
VVC software, tagged “VTM-23.0” in https://vcgit.hhi.fraunhofer.de/jvet/VVCSoftware_VTM with attached software changes (changes.diff) was used to generate the bitstream with the following command line:
EncoderAppStatic -c encoder_randomaccess_vtm.cfg -c two_layers_multi_profiles.cfg -l0 --Profile=main_10 -l1 --Profile=multilayer_main_10 -l1 --MultiLayerEnabledFlag=1

–	Contact name and email of bitstream submitter
Shunsuke Iwamura, iwamura.s-gc@nhk.or.jp

