1 Scope
2 References
3 Terms and definitions
4 Abbreviations
5 Conventions
6 Physical Layer
7 Reference Configuration
8 Service parameters and Service quality
8.1 Scope
8.2 Service parameters
8.3 Service quality
9 Data link transfer control
9.1 General
9.2 Frame format
9.3 Addressing
9.4 Transmission considerations
10 Frame relay
SVC signalling
10.1
General
10.2 Signalling channel
10.3 State definitions
10.4 Message definitions
10.5 General message format and information
element coding
10.6 Call establishment
11 Additional
procedures for PVCs using unnumbered information frames
11.1 Overview
11.2 Message definition
11.3 Message specific information elements
11.4 Description of procedures
11.5 Bidirectional aspects of operation
11.6 Asynchronous PVC STATUS message
11.7 System parameters
12 Congestion
control
Annex A Signalling for switched PVC (SPVC)
A.1 Messages needed for SPVC establishment
A.2 Called party SPVC information element
A.3 Calling
party SPVC information element
A.4 SPVC Procedures
Annex B Usage of cause and location
B.1 Location field generation
B.2 Cause values
B.3 Coding of the diagnostic field
Appendix I Network
congestion scenarios
Appendix II International network identification
according to Recommendation X.125 for networks providing frame relay services
and numbered under the E.164 numbering plan
II.1 Introduction
II.2 Assignment and notification process
Appendix III Call state diagrams at one STE side of the
NNI
III.1 Symbol definition of the call state diagrams
Appendix IV Action taken by the STE on receipt of a
message in a given call state at one side of NNI