1 Scope
2 References
3 Definitions
3.1 Terms defined elsewhere
3.2 Terms defined in this Recommendation
4 Abbreviations and acronyms
5 Conventions
6 Overview
7 Definition of the principal modes of operation
7.1 Emulation mode
7.2 Native mode
7.3 Methods for discrimination between native and emulation mode
8 Interworking function: Specific items for consideration
8.1 ITU-T T.30 procedures
8.2 Data rate management for ITU-T V.34 facsimile
9 Capability negotiation/determination for V.152-to-T.38 interworking
9.1 General
9.2 Negotiation using SDP
10 Handling of stimuli between VBDoIP and FoIP
11 Synchronization of state transitioning between VBDoIP and FoIP state
machines
Appendix I – Performance evaluation of both modes of operation
I.1 Gateway transfer delay
I.2 Gateway transfer delay variation
I.3 Gateway information loss
I.4 Dejitter buffer aspects
I.5 Aspect of redundant packet transport
Appendix II – H.248 bearer establishment procedure examples
II.1 Introduction
II.2 MG state transitioning: MGC-strict controlled method versus MG
autonomous transitioning
II.3 Example network model
II.4 Example signalling
Bibliography