1
Scope
2 References
3 Exceptions and clarifications for
ISDN supplementary services in the Q.730 series of Recommendations
Annex A – CLIP for non-native E.164 addresses
A.1 Definition
A.2 Description
A.2.1 General Description
A.2.2 Specific terminology
A.2.3 Qualification on the applicability to telecommunication services
A.3 Operational requirements
A.4 Coding requirements
A.5 Signalling requirements
A.5.1 Actions at the originating local exchange
A.5.2 Actions at the outgoing international gateway exchange
A.5.3 Actions at the destination local exchange
A.6 Interaction with other
supplementary services
A.6.1 Calling Line Identification Restriction (CLIR)
A.7 Interactions with other networks
A.8 Signalling flows
A.9 Parameter values (timers)
A.10 Dynamic description
Annex B – CLIR for non-native E.164 addresses
B.1 Definition
B.1.1 General description
B.1.2 Specific terminology
B.1.3 Qualification on the applicability
to telecommunication services
B.2 Description
B.3 Operational requirements
B.4 Coding requirements
B.5 Signalling requirements
B.5.1 Actions at the originating local exchange
B.5.2 Actions at the outgoing international gateway exchange
B.6 Interaction with other
supplementary services
B.6.1 Calling Line Identification Restriction (CLIR)
B.7 Interactions with other networks
B.8 Signalling flows
B.9 Parameter values (timers)
B.10 Dynamic description
Annex C – COLP for non-native E.164 addresses
C.1 Definition
C.2 Description
C.2.1 General Description
C.2.2 Specific terminology
C.2.3 Qualification on the applicability to telecommunication services
C.3 Operational requirements
C.4 Coding requirements
C.5 Signalling requirements
C.5.1 Actions at the originating local exchange
C.5.2 Actions at the incoming international gateway exchange
C.5.3 Actions at the destination local exchange
C.6 Interaction with other
supplementary services
C.7 Interactions with other networks
C.8 Signalling flows
C.9 Parameter values (timers)
C.10 Dynamic description
Annex D – COLR for non-native E.164 addresses
D.1 Definition
D.2 Description
D.2.1 General Description
D.2.2 Specific terminology
D.2.3 Qualification on the applicability to telecommunication services
D.3 Operational requirements
D.4 Coding requirements
D.5 Signalling requirements
D.5.1 Actions at the incoming international gateway exchange
D.5.2 Actions at the destination local exchange
D.6 Interaction with other
supplementary services
D.7 Interactions with other networks
D.8 Signalling flows
D.9 Parameter values (timers)
D.10 Dynamic description
Appendix I – Setting of instruction indicators