CONTENTS

 1     Scope
 2     References
 3     Abbreviations
 4     Measuring arrangements
        4.1     longitudinal conversion loss (LCL)
        4.2     transverse conversion loss (TCL)
        4.3     longitudinal conversion transfer loss (LCTL)
        4.4     transverse conversion transfer loss (TCTL)
        4.5     input longitudinal interference loss (ILIL)
        4.6     common-mode rejection (CMR)
        4.7     output signal balance (OSB)
 5     Requirements for the measuring arrangements
        5.1     Inherent balance
        5.2     Impedances Z₁, Z₂, Z_L1 and Z_L2
        5.3     Measuring and generating the test signals
        5.4     Other considerations
Appendix I – Aspects of conversion from longitudinal to transversal signals at analogue ports in some practical cases
        I.1     Introduction
        I.2     Calculation of the longitudinal conversion loss
        I.3     The difference between LCL_c and LCL_m in a practical case: two examples
        I.4     Additional insight into Longitudinal Conversion Loss