1 Scope
2 References
3 Definitions
3.1 Terms defined elsewhere
3.2 Terms defined in this Recommendation
4 Abbreviations and acronyms
5 Conventions
6 System composition
6.1 System composition
6.2 10 kVAC input cabinet
6.3 Phase shifting transformer cabinet
6.4 Rectifier cabinet
6.5 Output distribution cabinet
6.6 Integrated detection module
6.7 System configuration method
7 General requirements
7.1 Output voltage range
7.2 Safety requirement
7.3 EMC requirement
7.4 Resistibility
8 Monitoring system
Appendix I – Example of conditions for 10 kVAC input and up to 400 VDC output
integrated power system efficiency testing
I.1 Environmental conditions
I.2 Electrical conditions
I.3 Metrology requirements
I.4 Test configurations and results
Appendix II – Example of operation and maintenance
II.1 Verification test
II.2 Daily routine inspection
II.3 Regular maintenance
Appendix III – Example of application with 10 kVAC input and up to 400 VDC
output integrated power system
III.1 Comparison between traditional scheme and this scheme
III.2 Project advantages
Bibliography