Table of Contents - K.113 (07/2025) - Generation of radio-frequency electromagnetic field level maps

1	Scope
2	References
3	Definitions
	3.1	Terms defined elsewhere
	3.2	Terms defined in this Recommendation
4	Abbreviations and acronyms
5	Conventions
6	Methods
	6.1	Drive test measurements
	6.2	Theoretical calculations
	6.3	Grid method
	6.4	Combined method
	6.5	Discrepancies between results
7	Specifications of the equipment to be used
	7.1	Equipment for the drive test
	7.2	Equipment for grid test or spot measurements
	7.3	Calibration
8	Uncertainties
9	Report
Appendix I – Example of colour code and alternatives to use of colours for displaying RF-EMF map levels
	I.1	Example of colour code
	I.2	Alternative example of colour code
Appendix II – Case study on mapping measurements of electromagnetic fields from radiocommunication stations in Brazil
	II.1	Legislation in Brazil
	II.2	Flow for assessment
	II.3	Adoption of precautionary action
	II.4	Conclusion
Appendix III – Example of a RF-EMF field level map for the general public in the Republic of Korea
	III.1	RF-EMF field level map in the Republic of Korea
	III.2	Simplified example of colour code
Appendix IV – Example of RF-EMF field level monitoring for the public in China
	IV.1	Introduction
	IV.2	Measurement locations
	IV.3	Measurement height
	IV.4	Measurement of working conditions and 5G user equipment
	Page
	IV.5	Measurement readings
	IV.6	Overall assessment
	IV.7	Information record and reporting
	IV.8	Measurement quality assurance
	IV.9	Examples of forms
Bibliography