Table of Contents

 1     Scope          
 2     References
 3     Definitions
        3.1     Terms defined elsewhere       
        3.2     Terms defined in this Recommendation           
 4     Abbreviations and acronyms             
 5     Assessment procedure        
 6     Equipment under test data collection            
 7     Simplified assessment procedures 
 8     Measurement area selection            
 9     Measurement         
        9.1     Measurement equipment      
        9.2     Measured quantity    
        9.3     General exposure assessment
        9.4     Comprehensive exposure assessment
        9.5     Exposure contribution of ambient sources      
        9.6     Determination of the total exposure ratio       
10     Uncertainty            
Appendix I – Radio frequency field strength measurement equipment requirements     
Appendix II – Guidance on comprehensive measurements for specific technologies    
       II.1     Time division multiple access/frequency division multiple access technology    
       II.2     Code division multiple access/wideband code division multiple access technology         
       II.3     ODFM technology       
Appendix III – Maximum exposure location for a base station in the line of sight    
Appendix IV – Exposure limits    
       IV.1     Introduction 
       IV.2     General description of exposure limits              
       IV.3     [b-ICNIRP] exposure limits      
Appendix V – Averaging time reduction    
        V.1     Introduction 
        V.2     Rationale and methodology  
        V.3     Results and discussion