|
SECTION 1 – GENERAL
1.1 Scope
1.2 Normative references
SECTION 2 – TECHNICAL ELEMENTS
2.1 Definitions
2.2 Symbols and abbreviations
2.3 Method of describing bit stream syntax
2.4 Transport stream bitstream requirements
2.5 Program stream bitstream requirements
2.6 Program and program element descriptors
2.7 Restrictions on the multiplexed stream semantics
2.8 Compatibility with ISO/IEC 11172
2.9 Registration of copyright identifiers
2.10 Registration of private data format
2.11 Carriage of ISO/IEC 14496 data
2.12 Carriage of metadata
2.13 Carriage of ISO 15938 data
2.14 Carriage of Rec. ITU-T H.264 | ISO/IEC 14496-10 video
2.15 Carriage of ISO/IEC 14496-17 text streams
2.16 Carriage of auxiliary video streams
2.17 Carriage of HEVC
2.18 Carriage of green access units
2.19 Carriage of ISO/IEC 23008-3 MPEG-H 3D audio data
2.20 Carriage of Quality Access Units in MPEG-2 sections
2.21 Carriage of sample variants
2.22 Carriage of Media Orchestration Access Units
2.23 Carriage of VVC
2.24 Carriage of EVC
Annex A CRC decoder model
A.1 CRC decoder model
Annex B Digital storage medium command and control (DSM-CC)
B.1 Introduction
B.2 General elements
B.3 Technical elements
Annex C Program-specific information
C.1 Explanation of program-specific information in transport
streams
C.2 Introduction
C.3 Functional mechanism
C.4 The mapping of sections into transport stream packets
C.5 Repetition rates and random access
C.6 What is a program?
C.7 Allocation of program_number
C.8 Usage of PSI in a typical system
C.9 The relationships of PSI structures
C.10 Bandwidth utilization and signal acquisition time
Annex D Systems timing model and application
implications of this Recommendation | International Standard
D.1 Introduction
Annex E Data transmission applications
E.1 General considerations
E.2 Suggestion
Annex F Graphics of syntax for this Recommendation | International Standard
F.1 Introduction
Annex G General information
G.1 General information
Annex H Private data
H.1 Private data
Annex I Systems conformance and real-time interface
I.1 Systems conformance and real-time interface
Annex J Interfacing jitter-inducing networks to MPEG-2 decoders
J.1 Introduction
J.2 Network compliance models
J.3 Network specification for jitter smoothing
J.4 Example decoder implementations
Annex K Splicing transport streams
K.1 Introduction
K.2 The different types of splicing point
K.3 Decoder behaviour on splices
Annex L Registration procedure (see 2.9)
L.1 Procedure for the request of a Registered Identifier (RID)
L.2 Responsibilities of the Registration Authority
L.3 Responsibilities of parties requesting an RID
L.4 Appeal procedure for denied applications
Annex M Registration application form (see 2.9)
M.1 Contact information of organization requesting a Registered
Identifier (RID)
M.2 Statement of an intention to apply the assigned RID
M.3 Date of intended implementation of the RID
M.4 Authorized representative
M.5 For official use only of the Registration Authority
Annex N Registration Authority Diagram of administration structure (see 2.9)
Annex O Registration procedure (see 2.10)
O.1 Procedure for the request of an RID
O.2 Responsibilities of the Registration Authority
O.3 Contact information for the Registration Authority
O.4 Responsibilities of parties requesting an RID
O.5 Appeal procedure for denied applications
Annex P Registration application form
P.1 Contact information of organization requesting an RID
P.2 Request for a specific RID
P.3 Short description of RID that is in use and date system that
was implemented
P.4 Statement of an intention to apply the assigned RID
P.5 Date of intended implementation of the RID
P.6 Authorized representative
P.7 For official use of the Registration Authority
Annex Q T-STD and P-STD buffer models for ISO/IEC 13818-7 ADTS
Q.1 Introduction
Q.2 Leak rate from transport buffer
Q.3 Buffer size
Q.4 Conclusion
Annex R Carriage of ISO/IEC 14496 scenes in Rec. ITU-T H.222.0 | ISO/IEC
13818-1
R.1 Content access procedure for ISO/IEC 14496 program components
within a program stream
R.2 Content access procedure for ISO/IEC 14496 program components
within a transport stream
Annex S Carriage of JPEG 2000 part 1 video over MPEG-2 transport streams
S.1 Introduction
S.2 J2K video access unit, J2K video elementary stream, J2K video
sequence and J2K still picture
S.3 Optional J2K block mode for high resolution support
S.4 Optional J2K stripe mode for Ultra-Low Latency
S.5 Elementary stream header (elsm) and mapping to PES packets
S.6 J2K transport constraints
S.7 Interpretation of flags in adaptation and PES headers for J2K
video elementary streams
S.8 T-STD extension for J2K video elementary streams
Annex T MIME type for MPEG-2 transport streams
T.1 Introduction
T.2 MIME type and subtype
T.3 Security considerations
T.4 Parameters
Annex U Carriage of timeline and external media information over MPEG-2
transport streams
U.1 Introduction
U.2 TEMI access unit and TEMI elementary stream
U.3 AF descriptors
Annex V Transport of HEVC tiles
V.1 Introduction
V.2 HEVC tile substream identification example
V.3 Subregion layout example
Annex W Carriage of JPEG XS part 1 video over MPEG-2 Transport Streams
W.1 Introduction
W.2 JPEG XS video access unit, JPEG XS video elementary stream,
JPEG XS video sequence and JPEG XS still picture
W.3 Elementary stream header (jxes) and mapping to PES packets
W.4 JPEG XS transport constraints
W.5 Interpretation of flags in adaptation field and PES packet
for JPEG XS video elementary streams
W.6 T-STD extension for JPEG XS video elementary streams
|