Recommendation ITU-T G.997.3 (04/2021) Physical layer management for MGfast transceivers
Summary
History
Keywords
FOREWORD
Table of Contents
1 Scope
2 References
3 Definitions
     3.1 Terms defined elsewhere
     3.2 Terms defined in this Recommendation
4 Abbreviations and acronyms
5 Management architecture
6 Network management protocol
7 Managed objects
     7.1 Link identification
          7.1.1 Unknown NT identification (UNKNOWN_NT_ID)
          7.1.2 NT identification (NT_ID)
     7.2 Line configuration objects
          7.2.1 Profiles
               7.2.1.1 ITU-T G.9711 profiles enabling (PROFILES)
          7.2.2 Time division duplexing
               7.2.2.1 Number of symbol periods in a TDD frame (MF)
               7.2.2.2 Number of downstream symbol periods in a TDD frame (Mds)
               7.2.2.3 Cyclic extension
          7.2.3 Power and spectrum usage
               7.2.3.1 Downstream maximum aggregate transmit power (MAXATPds)
               7.2.3.2 Upstream maximum aggregate transmit power (MAXATPus)
               7.2.3.3 Downstream subcarrier masking (CARMASKds)
               7.2.3.4 Upstream subcarrier masking (CARMASKus)
               7.2.3.5 Downstream PSD mask (MIBPSDMASKds)
               7.2.3.6 Upstream PSD mask (MIBPSDMASKus)
               7.2.3.7 RFI bands (RFIBANDS)
               7.2.3.8 International amateur radio bands (IARBANDS)
               7.2.3.9 Upstream power back-off reference PSD (UPBOPSDA)
               7.2.3.10 Upstream power back-off reference PSD (UPBOPSDB)
               7.2.3.11 Upstream electrical length (UPBOKL)
               7.2.3.12 Force electrical length (UPBOKLF)
               7.2.3.13 UPBO reference electrical length per band (UPBOKLREF)
               7.2.3.14 Class of downstream limit masks (CLASSMASKds)
               7.2.3.15 Class of upstream limit masks (CLASSMASKus)
               7.2.3.16 Downstream RMC subcarrier masking (RMCCARMASKds)
               7.2.3.17 Upstream RMC subcarrier masking (RMCCARMASKus)
               7.2.3.18 Downstream FDX subcarrier masking (FDXMASKds)
               7.2.3.19 Upstream subcarrier masking (FDXMASKus)
          7.2.4 Noise margin
               7.2.4.1 Downstream target noise margin (TARSNRMds)
               7.2.4.2 Upstream target noise margin (TARSNRMus)
               7.2.4.3 Upstream maximum noise margin (MAXSNRMus)
               7.2.4.4 Downstream minimum noise margin (MINSNRMds)
               7.2.4.5 Upstream minimum noise margin (MINSNRMus)
          7.2.5 Seamless rate adaptation
               7.2.5.1 Downstream upshift noise margin (SRA-USNRMds)
               7.2.5.2 Upstream upshift noise margin (SRA-USNRMus)
               7.2.5.3 Downstream minimum time interval for upshift SRA (SRA-UTIMEds)
               7.2.5.4 Upstream minimum time interval for upshift SRA (SRA-UTIMEus)
               7.2.5.5 Downstream downshift noise margin (SRA-DSNRMds)
               7.2.5.6 Upstream downshift noise margin (SRA-DSNRMus)
               7.2.5.7 Downstream minimum time interval for downshift SRA (SRA-DTIMEds)
               7.2.5.8 Upstream minimum time interval for downshift SRA (SRA-DTIMEus)
          7.2.6 Fast rate adaptation
               7.2.6.1 Downstream FRA time window (FRA-TIMEds)
               7.2.6.2 Upstream FRA time window (FRA-TIMEus)
               7.2.6.3 Downstream FRA minimum percentage of degraded tones (FRA-NTONESds)
               7.2.6.4 Upstream FRA minimum percentage of degraded tones (FRA-NTONESus)
               7.2.6.5 Downstream FRA number of uncorrectable DTU (FRA-RTXUCds)
               7.2.6.6 Upstream FRA number of uncorrectable DTU (FRA-RTXUCus)
               7.2.6.7 Downstream vendor discretionary FRA triggering criteria (FRA-VENDISCds)
               7.2.6.8 Upstream vendor discretionary FRA triggering criteria (FRA-VENDISCus)
          7.2.7 Robust management channel
               7.2.7.1 Downstream target noise margin for RMC (TARSNRM-RMCds)
               7.2.7.2 Upstream target noise margin (TARSNRM-RMCus)
               7.2.7.3 Downstream minimum noise margin for RMC (MINSNRM-RMCds)
               7.2.7.4 Upstream minimum noise margin for RMC (MINSNRM-RMCus)
               7.2.7.5 Downstream maximum bitloading for RMC (MAXBL-RMCds)
               7.2.7.6 Upstream maximum bitloading for RMC (MAXBL-RMCus)
          7.2.8 Vectoring
               7.2.8.1 FEXT cancellation enabling/disabling downstream (FEXT_TO_CANCEL_ENABLEds)
               7.2.8.2 FEXT cancellation enabling/disabling upstream (FEXT_TO_CANCEL_ENABLEus)
               7.2.8.3 XLOG requested subcarrier group size (XLOGGREQds)
               7.2.8.4 Requested crosstalk disturber index (XTALKDREQ)
          7.2.9 Fast-retrain policy
               7.2.9.1 Downstream los defect persistency (LOS_PERSISTENCYds)
               7.2.9.2 Upstream los defect persistency (LOS_PERSISTENCYus)
               7.2.9.3 Downstream lom defect persistency (LOM_PERSISTENCYds)
               7.2.9.4 Upstream lom defect persistency (LOM_PERSISTENCYus)
               7.2.9.5 Downstream lor defect persistency (LOR_PERSISTENCYds)
               7.2.9.6 Upstream lor defect persistency (LOR_PERSISTENCYus)
               7.2.9.7 Downstream re-initialization time threshold (REINIT_TIME_THRESHOLDds)
               7.2.9.8 Upstream re-initialization time threshold (REINIT_TIME_THRESHOLDus)
               7.2.9.9 Downstream low ETR threshold (LOW_ETR_THRESHOLDds)
               7.2.9.10 Upstream low ETR threshold (LOW_ETR_THRESHOLDus)
          7.2.10 Update test parameters
               7.2.10.1 Update request flag for near-end test parameters (UPDATE-NE-TEST)
               7.2.10.2 Update request flag for far-end test parameters (UPDATE-FE-TEST)
          7.2.11 INM configuration objects
               7.2.11.1 INM inter arrival time offset (INMIATOds/us)
               7.2.11.2 INM inter arrival time step (INMIATSds/us)
               7.2.11.3 INM cluster continuation value (INMCCds/us)
               7.2.11.4 INM equivalent INP format (INM_INPEQ_FORMATds/us)
               7.2.11.5 DTU cluster bridging (BRGNds/us)
               7.2.11.6 INPEQ time unit scaling factor (INPEQ_SF)
               7.2.11.7 IAT time unit scaling factor (IAT_SF)
               7.2.11.8 INM enable (INM_ENABLE)
          7.2.12 RMCR configuration objects
               7.2.12.1 RMCR lor persistency trigger (RMCR_LOR_TRIGGERds/us)
          7.2.13 Showtime reconfiguration configuration objects
               7.2.13.1 SRECallowed (SREC_ALLOWED)
          7.2.14 PMD forward error correction scheme (PMDFECSCHEMEds/us)
     7.3 Channel configuration objects
          7.3.1 Data rates
               7.3.1.1 Maximum net data rate (MAXNDRds/us)
               7.3.1.2 Minimum expected throughput (MINETRds/us)
               7.3.1.3 Maximum gamma data rate (MAXGDRds/us)
               7.3.1.4 Minimum gamma data rate (MINGDRds/us)
          7.3.2 Retransmission
               7.3.2.1 Minimum impulse noise protection against SHINE (INPMIN_SHINEds/us)
               7.3.2.2 SHINE ratio (SHINERATIOds/us)
               7.3.2.3 Minimum impulse noise protection against REIN (INPMIN_REINds/us)
               7.3.2.4 REIN inter-arrival time (IAT_REINds/us)
               7.3.2.5 Minimum Reed-Solomon RFEC/NFEC ratio (RNRATIOds/us)
               7.3.2.6 RTX-TC test mode (RTX_TESTMODE)
          7.3.3 Rate threshold
               7.3.3.1 ''landeftr'' defect threshold (LOW-ANDEFTR-THRESHOLDds/us)
               7.3.3.2 ''landeftr0'' defect threshold with DTFO disabled (LOW-ANDEFTR0-THRESHOLDds/us)
     7.4 Data path configuration objects
          7.4.1 TPS-TC test mode (TPS_TESTMODE)
          7.4.2 DRA test mode (DRA_TESTMODE)
          7.4.3 Mapping of layer 2 QoS queue to QoS channel (QUEUE2CHANNELMAPds/us)
          7.4.4 QoS class association (QOSCLASSds/us)
               7.4.4.1 Priority (PRIORITY)
               7.4.4.2 Target maximum delay (MAXDELAY)
               7.4.4.3 Proactive retransmission (PROACTIVE_RTX)
     7.5 Line failures
          7.5.1 Near end failures
               7.5.1.1 Loss-of-signal failure
               7.5.1.2 Loss-of-RMC failure
               7.5.1.3 Loss-of-margin failure
               7.5.1.4 Loss of power failure
          7.5.2 Far-end failures
               7.5.2.1 Loss of signal-far end failure
               7.5.2.2 Loss of RMC-far end failure
               7.5.2.3 Loss of margin failure-far end
               7.5.2.4 Loss of power-far end failure
          7.5.3 Initialization failures
               7.5.3.1 Link initialization (LINIT) failure
     7.6 Channel failures
     7.7 Data path failures
     7.8 Line performance monitoring objects
          7.8.1 Measured time (CURR/PREV_NE/FE_15/24_L_TIME)
          7.8.2 Invalid data flag (PREV_NE/FE_15/24_L_INVALID)
          7.8.3 Time stamp (PREV_NE/FE_15/24_L_STAMP)
          7.8.4 LOS failure counter (CURR/PREV_NE/FE_15/24_LOS)
          7.8.5 LOR failure counter (CURR/PREV_NE/FE_15/24_LOR)
          7.8.6 LOM failure counter (CURR/PREV_NE/FE_15/24_LOM)
          7.8.7 LPR failure counter (CURR/PREV_NE/FE_15/24_LPR)
          7.8.8 ES counter (CURR/PREV_NE/FE_15/24_ES)
          7.8.9 SES counter (CURR/PREV_NE/FE_15/24_SES)
          7.8.10 LOSS counter (CURR/PREV_NE/FE_15/24_LOSS)
          7.8.11 LORS counter (CURR/PREV_NE/FE_15/24_LORS)
          7.8.12 UAS counter (CURR/PREV_NE/FE_15/24_UAS)
          7.8.13 Full inits counter (CURR/PREV_15/24_FULL_INITS)
          7.8.14 Failed full inits counter (CURR/PREV_15/24_FAILEDFULL_INITS)
          7.8.15 Fast inits counter (CURR/PREV_15/24_FAST_INITS)
          7.8.16 Failed fast inits counter (CURR/PREV_15/24_FAILEDFAST_INITS)
          7.8.17 LPR_INTRPT counter (CURR/PREV_15/24_LPR_INTRPT)
          7.8.18 HRI_INTRPT counter (CURR/PREV_15/24_HRI_INTRPT)
          7.8.19 SPONT_INTRPT counter (CURR/PREV_15/24_SPONT_INTRPT)
          7.8.20 Successful bit swap counter (CURR/PREV_NE/FE_15/24_BSW)
          7.8.21 Successful autonomous SRA (CURR/PREV_NE/FE_15/24_SRA)
          7.8.22 Successful FRA counter (CURR/PREV_NE/FE_15/24_FRA)
          7.8.23 Successful RPA counter (CURR/PREV_NE/FE_15/24_RPA)
          7.8.24 Successful TIGA counter (CURR/PREV_15/24_TIGA)
          7.8.25 INM performance monitoring objects
               7.8.25.1 INM INPEQ histogram (CURR/PREV_NE/FE_15/24_INMINPEQ)
               7.8.25.2 INM total measurement (CURR/PREV_NE/FE_15/24_INMAME)
               7.8.25.3 INM IAT histogram (CURR/PREV_NE/FE_15/24_INMIAT)
               7.8.25.4 INM blank frame counter (CURR/PREV_NE/FE_15/24_INMBLFCds/us)
          7.8.26 Reinitializations due to ME-O trigger counter (CURR/PREV_15/24_ME_O_INTRPT)
          7.8.27 Successful SREC counter (CURR/PREV_15/24_SUCCESS_SREC)
          7.8.28 Successful RMCR counter (CURR/PREV_NE/FE_15/24_RMCR)
     7.9 Channel performance monitoring objects
          7.9.1 Measured time (CURR/PREV_NE/FE_15/24_C_TIME)
          7.9.2 Invalid data Flag (PREV_NE/FE_15/24_C_INVALID)
          7.9.3 Time stamp (PREV_NE/FE_15/24_C_STAMP)
          7.9.4 CV counter (CURR/PREV_NE/FE_15/24_CV)
          7.9.5 Uncorrected DTU counter (CURR/PREV_NE/FE_15/24_RTXUC)
          7.9.6 Retransmitted DTU counter (CURR/PREV_NE/FE_15/24_RTXTX)
          7.9.7 LANDEFTRS counter (CURR/PREV_NE/FE_15/24_LANDEFTRS)
          7.9.8 LANDEFTR0S counter (CURR/PREV_NE/FE_15/24_LANDEFTR0S)
          7.9.9 ANDEFTRDS counter (CURR/PREV_NE/FE_15/24_ANDEFTRDS)
          7.9.10 ANDEFTR0DS counter (CURR/PREV_NE/FE_15/24_ANDEFTR0DS)
          7.9.11 Minimum all-NOI with data symbols EFTR per time interval (MINANDEFTR_CURR/PREV_NE/FE_15/24)
          7.9.12 Minimum all-NOI with data symbols EFTR with DTFO disabled (ANDEFTR0) per time interval (MINANDEFTR0_CURR/PREV_NE/FE_15/24)
          7.9.13 Maximum all-NOI with data symbols EFTR per time interval (MAXANDEFTR_CURR/PREV_NE/FE_15/24)
          7.9.14 Maximum all-NOI with data symbols EFTR with DTFO disabled (ANDEFTR0) per time interval (MAXANDEFTR0_CURR/PREV_NE/FE_15/24)
          7.9.15 Sum all-NOI with data symbols EFTR per time interval (SUMANDEFTR_CURR/PREV_NE/FE_15/24)
          7.9.16 Sum all-NOI with data symbols EFTR with DTFO disabled (ANDEFTR0) per time interval (SUMANDEFTR0_CURR/PREV_NE/FE_15/24)
     7.10 Data path performance monitoring objects
     7.11 Line test, diagnostics and status objects
          7.11.1 Profile
               7.11.1.1 ITU-T G.9711 profile (PROFILE)
          7.11.2 Initialization
               7.11.2.1 Initialization success or failure cause (INITSFCAUSE)
               7.11.2.2 Initialization last transmitted downstream signal (INITLASTSIGNALds)
               7.11.2.3 Initialization last received upstream signal (INITLASTSIGNALus)
          7.11.3 Signal-to-noise ratio margin
               7.11.3.1 Downstream signal-to-noise ratio margin (SNRMds)
               7.11.3.2 Downstream signal-to-noise ratio margin (SNRMus)
          7.11.4 Upstream power back-off
               7.11.4.1 MTU-O estimated upstream power back-off electrical length (UPBOKLE)
               7.11.4.2 MTU-R estimated upstream power back-off electrical length (UPBOKLE-R)
          7.11.5 Actual aggregate transmit power
               7.11.5.1 Downstream actual aggregate transmit power (ACTATPds)
               7.11.5.2 Upstream actual aggregate transmit power (ACTATPus)
          7.11.6 Actual transmit PSD per subcarrier
               7.11.6.1 Downstream actual transmit PSD per subcarrier (ACTPSDpsds)
               7.11.6.2 Upstream actual transmit PSD per subcarrier (ACTPSDpsus)
          7.11.7 Channel characteristics function per subcarrier (HLOG)
               7.11.7.1 Downstream HLOG measurement time (HLOGMTds)
               7.11.7.2 Downstream HLOG subcarrier group size (HLOGGds)
               7.11.7.3 Downstream HLOG(f) (HLOGpsds)
               7.11.7.4 Upstream HLOG measurement time (HLOGMTus)
               7.11.7.5 Upstream HLOG subcarrier group size (HLOGGus)
               7.11.7.6 Upstream Hlog(f) (HLOGpsus)
          7.11.8 Signal-to-noise ratio per subcarrier
               7.11.8.1 Downstream signal-to-noise ratio PSD measurement time (SNRMTds)
               7.11.8.2 Downstream SNR(f) subcarrier group size (SNRGds)
               7.11.8.3 Downstream SNR(f) during the PSF (SNRpsds)
               7.11.8.4 Downstream SNR(f) during the NPSF (SNRNPSFpsds)
               7.11.8.5 Upstream signal-to-noise ratio PSD measurement time (SNRMTus)
               7.11.8.6 Upstream SNR(f) subcarrier group size (SNRGus)
               7.11.8.7 Upstream SNR(f) during the PSF (SNRpsus)
               7.11.8.8 Upstream SNR(f) during the NPSF (SNRNPSFpsus)
          7.11.9 Quiet line noise PSD per subcarrier (QLN)
               7.11.9.1 Downstream QLN measurement time (QLNMTds)
               7.11.9.2 Downstream QLN subcarrier group size (QLNGds)
               7.11.9.3 Downstream QLN(f) (QLNpsds)
               7.11.9.4 Upstream QLN measurement time (QLNMTus)
               7.11.9.5 Upstream QLN subcarrier group size (QLNGus)
               7.11.9.6 Upstream QLN(f) (QLNpsus)
          7.11.10 Active line noise PSD per subcarrier (ALN)
               7.11.10.1 ALN measurement time (ALNMT)
               7.11.10.2 ALN subcarrier group size (ALNG)
               7.11.10.3 ALN(f) (ALNps)
          7.11.11 Bit allocation per subcarrier on data symbols
               7.11.11.1 Downstream bits allocation during the PSF (BITSpsds)
               7.11.11.2 Downstream bits allocation during the NPSF (BITSNPSFpsds)
               7.11.11.3 Upstream bits allocation during the PSF (BITSpsus)
               7.11.11.4 Upstream bits allocation during the NPSF (BITSNPSFpsus)
          7.11.12 Robust management channel
               7.11.12.1 Downstream signal-to-noise ratio margin for RMC (SNRM-RMCds)
               7.11.12.2 Upstream signal-to-noise ratio margin for RMC (SNRM-RMCus)
               7.11.12.3 Downstream bits allocation for RMC (BITS-RMCpsds)
               7.11.12.4 Upstream bits allocation for RMC (BITS-RMCpsus)
          7.11.13 Test parameter time stamps
               7.11.13.1 Date and time stamping of near-end test parameter group 1 (STAMP-TEST-NE-G1)
               7.11.13.2 Date and time stamping of far-end test parameter group 1 (STAMP-TEST-FE-G1)
               7.11.13.3 Date and time stamping of near-end test parameter group 2 (STAMP-TEST-NE-G2)
               7.11.13.4 Date and time stamping of far-end test parameter group 2 (STAMP-TEST-FE-G2)
          7.11.14 On-line reconfiguration (OLR) or FRA time stamps
               7.11.14.1 Date and time stamping of last successful downstream bit swap operation (STAMP-BSWds)
               7.11.14.2 Date and time stamping of last successful upstream bit swap operation (STAMP-BSWus)
               7.11.14.3 Date and time stamping of last successful downstream autonomous SRA operation (STAMP-SRAds-)
               7.11.14.4 Date and time stamping of last successful upstream autonomous SRA operation (STAMP-SRAus-)
               7.11.14.5 Date and time stamping of last successful downstream FRA operation (STAMP-FRAds-)
               7.11.14.6 Date and time stamping of last successful upstream FRA operation (STAMP-FRAus-)
               7.11.14.7 Date and time stamping of last successful downstream RPA operation (STAMP-RPAds)
               7.11.14.8 Date and time stamping of last successful upstream RPA operation (STAMP-RPAus)
               7.11.14.9 Date and time stamping of last successful downstream TIGA operation (STAMP-TIGA)
               7.11.14.10  Date and time stamping of last successful SREC operation (STAMP-SREC)
               7.11.14.11  Date and time stamping of last successful downstream RMCR operation  (STAMP-RMCRds)
               7.11.14.12  Date and time stamping of last successful upstream RMCR operation  (STAMP-RMCRus)
          7.11.15 Signal attenuation (SATN)
               7.11.15.1 Downstream signal attenuation (SATNds)
               7.11.15.2 Upstream signal attenuation (SATNus)
          7.11.16 Vectoring
               7.11.16.1 Crosstalk disturber index (XTALKDIST)
               7.11.16.2 Downstream XLOG bandedges (XLOGBANDSds)
               7.11.16.3 Downstream FEXT coupling per subcarrier (XLOGpsds)
               7.11.16.4 Average NEXT bandedges (ANEXTBANDSds/us)
               7.11.16.5 Number of subcarriers for NEXT averaging (ANEXTNCALCSETds/us)
               7.11.16.6 Average NEXT coupling (ANEXTds/us)
          7.11.17 Actual PMD forward error correction scheme (ACTPMDFECSCHEMEds/us)
          7.11.18 Actual PDX framing mode (ACTPDXFRAMINGMODE)
     7.12 Channel test, diagnostics and status objects
          7.12.1 Actual data rates
               7.12.1.1 Net data rate (NDRds/us)
               7.12.1.2 Net data rate with DTFO disabled (NDR0ds/us)
               7.12.1.3 Expected throughput (ETRds/us)
               7.12.1.4 Expected throughput with DTFO disabled (ETR0ds/us)
               7.12.1.5 Gamma data rate (GDRds/us)
          7.12.2 Attainable data rates
               7.12.2.1 Attainable net data rate (ATTNDRds/us)
               7.12.2.2 Attainable expected throughput (ATTETRds/us)
               7.12.2.3 Attainable gamma data rate (ATTGDRds/us)
          7.12.3 Actual impulse noise protection
               7.12.3.1 Actual INP against SHINE (ACTINPds/us)
               7.12.3.2 Actual INP against REIN (ACTINP_REINds/us)
          7.12.4 Actual framer settings
               7.12.4.1 DTU FEC codeword length (DTU-NFECds/us)
               7.12.4.2 DTU FEC redundancy (DTU-RFECds/us)
               7.12.4.3 Number of FEC codewords per DTU (DTU-Qds/us)
          7.12.5 Test parameters per time interval
               7.12.5.1 Error-free bits current 15 min (EFB-C15Mds/us)
               7.12.5.2 Error-free bits previous 15 min (EFB-P15Mds/us)
               7.12.5.3 Error-free bits current 24 h (EFB-C24Hds/us)
               7.12.5.4 Error-free bits previous 24 hours (EFB-P24Hds/us)
               7.12.5.5 Minimum error-free throughput current 15 min (MINEFTR-C15Mds/us)
               7.12.5.6 Minimum error-free throughput previous 15 min (MINEFTR-P15Mds/us)
               7.12.5.7 Minimum error-free throughput current 24 h (MINEFTR-C24Hds/us)
               7.12.5.8 Minimum error-free throughput previous 24 h (MINEFTR-P24Hds/us)
     7.13 Data path test, diagnostics and status objects
     7.14 Inventory objects
          7.14.1 MTU related inventory
               7.14.1.1 MTU-O ITU-T G.994.1 vendor ID (MTUO_GHS_VENDOR)
               7.14.1.2 MTU-R ITU-T G.994.1 vendor ID (MTUR_GHS_VENDOR)
               7.14.1.3 MTU-O version number (MTUO_VERSION)
               7.14.1.4 MTU-R version number (MTUR_VERSION)
               7.14.1.5 MTU-O self-test result (MTUO_SELFTEST)
               7.14.1.6 MTU-R self-test result (MTUR_SELFTEST)
               7.14.1.7 ITU-T G.9711 profile support (MTUO_PROFILES)
               7.14.1.8 ITU-T G.9711 profile support (MTUR_PROFILES)
          7.14.2 System related inventory
               7.14.2.1 DPU system vendor ID (DPU_SYSTEM_VENDOR)
               7.14.2.2 NT system vendor ID (NT_SYSTEM_VENDOR)
               7.14.2.3 DPU system serial number (DPU_SYSTEM_SERIALNR)
               7.14.2.4 NT system serial number (NT_SYSTEM_SERIALNR)
               7.14.2.5 VCE ID (VCE_ID)
               7.14.2.6 VCE port index (VCE_PORT_INDEX)
               7.14.2.7 NT identity (NT_ID)
     7.15 P2MP configuration objects
          7.15.1 Maximum P2MP groupsize (MAXP2MPGROUPSIZE)
          7.15.2 Maximum P2MP group aggregate transmit power (MAXP2MPGROUPATPds/us)
          7.15.3 Maximum P2MP group net data rate (MAXP2MPGROUPNDRds/us)
     7.16 P2MP status objects
          7.16.1 Actual P2MP groupsize (ACTP2MPGROUPSIZE)
          7.16.2 Actual P2MP group aggregate transmit power (ACTP2MPGROUPATPds/us)
          7.16.3 Actual P2MP group net data rate (ACTP2MPGROUPNDRds/us)
8 Procedures for performance monitoring functions
     8.1 Link transmission states
     8.2 Threshold reports
     8.3 Unavailable and available state filters
     8.4 TR1 filter
     8.5 TR2 filter
     8.6 Evaluation of TR1
     8.7 Evaluation of TR2
     8.8 Threshold report evaluation during transmission state changes
     8.9 Performance history storage in network elements
     8.10 Register size
     8.11 Parameter counts
     8.12 Date and time stamping of reports
     8.13 Inhibiting performance monitoring parameters
Annex A to Annex R
Annex S  Management for network termination software upgrade process
     S.1 Scope
     S.2 References
     S.3 Definitions
     S.4 Abbreviations and acronyms
     S.5 DPU management architecture
     S.6 Network management protocol
     S.7 Managed objects
          S.7.1 NT software management objects
               S.7.1.1 Software image attributes
                    S.7.1.1.1 Software image version (NT_SW_VERSION0/1)
                    S.7.1.1.2 Software image committed (NT_SW_COMMITTED0/1)
                    S.7.1.1.3 Software image active (NT_SW_ACTIVE0/1)
                    S.7.1.1.4 Software image valid (NT_SW_VALID0/1)
                    S.7.1.1.5 Software product code (NT_SW_PRODUCTCODE0/1)
                    S.7.1.1.6 Software image hash (NT_SW_HASH0/1)
                    S.7.1.1.7 Update request flag for software image attributes (UPDATE_NT_SW_ATTR0/1)
               S.7.1.2 Software image configuration
                    S.7.1.2.1 Activate software conditions (NT_SW_ACTIVATE_COND0/1)
                    S.7.1.2.2 Request activate software flag (NT_SW_ACTIVATE0/1)
                    S.7.1.2.3 Result of activate software (NT_SW_ACTIVATE_RES0/1)
                    S.7.1.2.4 Request commit software flag (NT_SW_COMMIT0/1)
                    S.7.1.2.5 Result of commit software (NT_SW_COMMIT_RES0/1)
                    S.7.1.2.6 Location of software image file (NT_SW_IMAGEFILE0/1)
                    S.7.1.2.7 Request software image download (NT_SW_DOWNLOAD0/1)
                    S.7.1.2.8 Result of software image download (NT_SW_DOWNLOAD_RES0/1)
Annex T  Annex D and Annex T of ITU-T G.9711 – Managed objects
     T.1 Overview of Annex D and Annex T of ITU-T G.9711 managed objects
     T.2 Annex D and Annex T of [ITU-T G.9711] configuration objects
          T.2.1 DTA, Annex D management
               T.2.1.1 DTA allowed (DTA_ALLOWED)
          T.2.2 DRA configuration
               T.2.2.1 Preferred Mds for DTA (DTA_PREF_Mds)
               T.2.2.2 Maximum step size for DTA changes (DTA_SMAX)
               T.2.2.3 Minimum Mds for DTA (DTA_MIN_Mds)
               T.2.2.4 Maximum Mds for DTA (DTA_MAX_Mds)
               T.2.2.5 Minimum expected throughput for DTA (DTA_MINETRds/us)
               T.2.2.6 Maximum net data rate for DTA (DTA_MAXNDRds/us)
               T.2.2.7 Minimum time between DTA updates (DTA_MIN_TIME)
     T.3 Annex D and Annex T of ITU-T G.9711 status objects
          T.3.1 Annex D operation enabled (ANNEX_D_ENABLED)
Bibliography