1 Scope
2 References
3 Definitions
3.1 Terms defined elsewhere
3.2 Terms defined in this Recommendation
4 Abbreviations and acronyms
5 Management architecture
6 Network management protocol
7 Managed objects
7.1 Line configuration objects
7.2 Channel configuration objects
7.3 Data path configuration objects
7.4 Line failures
7.5 Channel failures
7.6 Data path failures
7.7 Line performance monitoring objects
7.8 Channel performance monitoring objects
7.9 Data path performance monitoring objects
7.10 Line test, diagnostics and status objects
7.11 Channel test, diagnostics and status objects
7.12 Data path test, diagnostics and status objects
7.13 Inventory objects
7.14 Link State related managed objects
8 Procedures for performance monitoring functions
8.1 Line transmission states
8.2 Threshold reports
8.3 Unavailable and available state filters
8.4 TR1 filter
8.5 TR2 filter
8.6 Evaluation of TR1
8.7 Evaluation of TR2
8.8 Threshold report evaluation during transmission state changes
8.9 Performance history storage in network elements
8.10 Register size
8.11 Parameter counts
8.12 Date/time-stamping of reports
8.13 Inhibiting performance monitoring parameters
Annex A – Physical layer management for reverse power feeding (RPF) of remote
access equipment
A.1 Scope
A.2 References
A.3 Definitions
A.4 Abbreviations and acronyms
A.5 DPU and NT management architecture
A.6 Network management protocol
A.7 DPU Northbound managed objects
Annex B to Annex R
Annex S – Management for network termination (NT) software upgrade process
S.1 Scope
S.2 References
S.3 Definitions
S.4 Abbreviations and acronyms
S.5 DPU management architecture
S.6 Network management protocol
S.7 Managed objects
Annex T – Annex X, Annex D and Annex T of ITU-T G.9701 – Managed objects
T.1 Overview of Annex X, Annex D and Annex T of ITU-T G.9701
managed objects
T.2 Annex X, Annex D and Annex T of ITU-T G.9701 configuration
objects
T.3 Annex X, Annex D and Annex T of ITU-T G.9701 status objects
T.4 Annex X, Annex D and Annex T of ITU-T G.9701 inventory objects
Annex U to Annex W
Annex X – Cross-layer link state objects
X.1 Overview of cross-layer link state objects
X.2 Cross-Layer Low power Mode Control
Appendix I – Broadband Forum considerations on the FTTdp deployment
scenario
Bibliography