1 Scope
2 References
3 Definitions
3.1 Terms defined elsewhere
3.2 Terms defined in this Recommendation
4 Abbreviations and acronyms
5 Methodology
5.1 Basic methodology
5.2 Transmission layer naming
5.3 Atomic function naming and diagrammatic conventions
5.4 Reference point naming
5.5 Reference point information naming
5.6 Atomic function process allocation
5.7 Combination rules
5.8 Fault management and performance monitoring naming
5.9 Fault management and performance monitoring specification
techniques
6 Supervision
6.1 Trail termination point mode and port mode
6.2 Defect filter
6.3 Consequent actions
6.4 Defect correlations
6.5 One-second performance monitoring filters
7 Information flow (XXX_MI) across the XXX_MP reference points
8 Generic processes
8.1 Line coding and scrambling processes
8.2 Alignment processes
8.3 Performance supervision process
8.4 BIP correction
8.5 GFP processes
9 Performance and reliability
9.1 Transit delay
9.2 Response times
9.3 Availability and reliability
9.4 Laser safety
10 Generic equipment functions
10.1 LCAS-capable virtual concatenated path layer functions P-Xv-L
(X ³ 1)
Annex A – Assignment and use of signal label, payload type and user payload
identifier codes
A.1 Experimental code
A.2 Proprietary codes
A.3 Request for standardized codes
Annex B – P-Xv/P-X-L_A_Sk: Calculation of RI_MST_gen for _LCASActive = true
Appendix I – Connection matrix examples
I.1 Connection matrix example for full connectivity
I.2 Connection matrix example for 2-port groups
I.3 Connection matrix example for 3-port groups type I
I.4 Connection matrix example for 3-port groups type
II
I.5 Connection matrix example for 4-port groups type I
I.6 Connection matrix example for 4-port groups type
II
I.7 Example of a provisioned connection matrix
I.8 Connection matrix example for 3-port groups (address
slot group switching)
I.9 Connection matrix example for 4-port groups (address
slot group switching)
Appendix II – Example of remote indication operation
II.1 Remote defect indication (RDI)
II.2 Remote error indication (REI)
Appendix III – Alarm indication signal (AIS)
Appendix IV – Signal fail (SF) and signal degrade (SD)
IV.1 Server signal fail (SSF) signal
IV.2 Server signal degrade (SSD) signal
IV.3 Trail signal fail (TSF) signal
IV.4 Trail signal degrade (TSD) signal
Appendix V – Description of error detection code (EDC) terminology N ×
BIP-m
Appendix VI – Calculations leading to BIP saturation results in Tables 6-4 and
6-5
VI.1 Introduction
VI.2 Calculations and results
Appendix VII – Examples for the operation of the processes within LCAS-capable
adaptation functions
VII.1 Basic configuration
VII.2 LCAS-enabled So and Sk functions
VII.3 LCAS-enabled So and LCAS-disabled Sk functions
VII.4 LCAS-disabled So and LCAS-enabled Sk functions
VII.5 Non-virtual-concatenation So and LCAS-capable
virtual-concatenation Sk functions
Page
Appendix VIII – Consequent actions for signals with no AIS/FDI defined
Appendix IX – Types of flow forwarding processes
Appendix X – SDL descriptions
Appendix XI – Behaviour of trail termination point mode and
port mode
Bibliography