Table of Contents

 1     Scope        
 2     References             
 3     Terms and definitions         
        3.1     Terms defined elsewhere      
        3.2     Terms defined in this Recommendation          
 4     Abbreviations and acronyms           
 5     Methodology         
 6     Supervision            
        6.1     Defects         
        6.2     Consequent actions   
        6.3     Defect correlations   
        6.4     Performance filters  
 7     Information flow across reference points    
 8     Generic processes for Ethernet equipment  
        8.1     OAM related processes         
        8.2     Queuing process       
        8.3     Filter process            
        8.4     Replicate process      
        8.5     802.3 protocols processes      
        8.6     MAC Length Check process   
        8.7     MAC Frame Counter process 
        8.8     "Server Specific" common processes  
        8.9     QoS-related processes           
 9     Ethernet MAC layer (ETH) functions             
        9.1     ETH Connection functions (ETH_C)     
        9.2     ETH Termination functions    
        9.3     ETH Adaptation functions      
        9.4     ETH Diagnostic functions       
        9.5     Server to ETH Adaptation functions (<server>/ETH_A)
        9.6     Traffic Conditioning and Shaping functions     
        9.7     ETH Link Aggregation functions          
10     Ethernet PHY Layer (ETYn) functions           
       10.1     ETYn Connection functions (ETYn_C) 
       10.2     ETYn Trail Termination functions (ETYn_TT)  
       10.3     ETYn to ETH Adaptation functions (ETYn/ETH_A)        
       10.4     1000BASE-(SX/LX/CX) ETY to coding sub-layer adaptation functions (ETY3/ETC3_A)    
11     Non-Ethernet server to ETH Adaptation functions    
       11.1     SDH to ETH Adaptation functions (S/ETH_A)  
       11.2     SDH to ETC Adaptation functions (Sn-X/ETC3_A)         
       11.3     S4-64c to ETH-w Adaptation functions            
       11.4     PDH to ETH Adaptation functions (P/ETH_A)  
       11.5     OTH to ETH Adaptation functions (O/ETH_A) 
       11.6     MPLS to ETH Adaptation functions (MPLS/ETH_A)      
       11.7     ATM VC to ETH Adaptation functions (VC/ETH_A)      
       11.8     RPR to ETH Adaptation functions (RPR/ETH_A)           
Appendix I – Applications and functional diagrams    
Appendix II – AIS/RDI mechanism for an Ethernet private line over a single SDH or OTH server layer    
Appendix III – Compound Functions    
Appendix IV – Startup conditions    
Appendix V – SDL descriptions    
Appendix VI – Calculation methods for frame loss measurement    
       VI.1     Dual-ended loss measurement           
       VI.2     Single-ended loss measurement         
Appendix VII – Considerations for the support of a rooted multipoint EVC service    
      VII.1     Port group function  
      VII.2     Configuration of asymmetric VLANs  
Bibliography