1 Scope
2 References
3 Definitions
3.1 Terms defined elsewhere
3.2 Terms defined in this Recommendation
4 Abbreviations and acronyms
5 Conventions
6 Supervision
6.1 Alarm reporting control
6.2 Defects
6.3 Consequent actions
6.4 Defect correlations
6.5 Performance filters
7 Information flow across reference points
8 Generic processes
8.1 Blank clause
8.2 Alignment processes
8.3 Signal quality supervision
8.4 Blank clause
8.5 OTUk forward error correction (FEC) processing
8.6 Trail trace identifier (TTI) processing
8.7 Payload structure indication (PSI) acceptance processes
8.8 Status information (STAT) acceptance process
8.9 Generic AIS generation and detection
8.10 Generic layer fault processing
8.11 OTSi modulator and demodulator processes
9 OTS-O layer functions
9.1 Connection functions
9.2 Termination functions
9.3 Adaptation functions
10 OMS-O layer functions
10.1 Connection functions
10.2 Termination functions
10.3 Adaptation functions
10.4 Sub-layer functions
11 OSC (layer) functions
11.1 Connection functions
11.2 Termination functions
11.3 Adaptation functions
12 OTSiA and OCh (layer) functions
12.1 Connection functions
OTSiA|OCh_C_MP:
12.2 Termination functions
12.3 Adaptation functions
12.4 Sub-layer functions
13 OTU (layer) functions
13.1 Connection functions
13.2 Termination functions
13.3 Adaptation functions
13.4 Sub-layer functions
14 ODU (layer) functions
14.1 Connection functions
14.2 Termination functions
14.3 Adaptation functions
14.4 COMMS functions
14.5 Sub-layer functions
14.6 Blank clause
15 FlexO functions
15.1 Connection functions
15.2 Termination functions
15.3 Adaptation functions
16 OTSi adaptation functions
16.1 OTSi to OTUk adaptation function (OTSi/OTUk_A)
16.2 OTSi to OTUkV adaptation function (OTSi/OTUkV_A)
16.3 OTSiG to OTUk adaptation function (OTSiG/OTUk_A)
16.4 OTSiG to OTUkV adaptation function (OTSiG/OTUkV_A)
16.5 OTSi to OTUCn adaptation function (OTSi/OTUCn_A)
16.6 OTSiG to OTUCn adaptation function (OTSiG/OTUCn_A)
16.7 OTSi to FlexO adaptation function (OTSiG/FlexO_A)
16.8 OTSiG to FlexO adaptation function (OTSiG/FlexO_A)
16.9 OTSi to OSC adaptation function (OTSi/OSC_A)
17 Media element
Annex A – Optical section (OSx) and constant bit rate (CBRx) layer
functions
A.1 Connection functions
A.2 Termination functions
A.3 Adaptation functions
Page
Annex B – Generic FlexE and FlexO supervision and processes
B.1 Supervision
B.2 Generic processes
Appendix I – Applications and functional diagrams
I.1 Transparent CBRx tributary interface port with optional SDH RS
non-intrusive monitor on OTN equipment
I.2 SOTU tributary interface port on OTN equipment
I.3 Selectable CBRx/SOTU tributary interface port on OTN equipment
I.4 SOTU interface ports on non-OTN equipment
I.5 MOTUm interface port with 3-R regeneration functionality for an
ODUk connection function
Appendix II – Blank appendix
Appendix III – Performance of processes
III.1 Introduction
III.2 OTUk frame alignment process
III.3 STAT acceptance process and related defect detection
III.4 OTU dIAE, OTU dBDI, ODU dBDI detection
III.5 PT acceptance process and ODUPdPLM detection
III.6 Generic AIS and OTUk AIS detection
III.7 OTU and ODUT dBIAE detection process
Appendix IV – TTI processing examples
IV.1 Example 1
IV.2 Example 2
Appendix V – Blank appendix
Appendix VI – OTSi client mapping of pre-OTN signals
VI.1 OTSi to CBRx adaptation (OTSi/CBRx_A)
VI.2 OTSi to GbE adaptation function (OTSi/GbE_A)
VI.3 OTSi to RSn adaptation (OTSi/RSn_A)
Appendix VII – Examples of media elements
Appendix VIII – OMS trail protection
VIII.1 OMS trail protection sub-layer functions
Bibliography