CONTENTS

Policy on Intellectual Property Right (IPR)
 1 Introduction
 2 Sources of radio noise
 3     Components of radio noise
 4 Key parameters
 5 Measurement principles
 6 Measurement type
 7     Equipment specifications
        7.1     Receiver and preamplifier
        7.2 Antennas
 8 Uncertainty analysis
 9 Measurement process
        9.1 Selecting measurement locations
        9.2 Frequency selection
        9.3 Analyser/receiver settings
        9.4 Measuring period
        9.5 Separation of man-made and atmospheric noise (measurement Type C only)
        9.6 Data collection and post processing
                  9.6.1 WGN measurements with r.m.s. detector (Measurement Type A)
                  9.6.2 WGN + IN measurements with raw data sampling (Measurement Types A, B and C)
10 Data processing
       10.1 Overview
       10.2     Correction for equipment noise
       10.3 Determination of the WGN level using the “20% method” (r.m.s.-WGN measurement only)
       10.4 Validation of the 20% cut-off value (r.m.s. WGN measurements only)
       10.5 Plotting of the APD (raw data sampling only)
       10.6 Calculation of F_a
       10.7 Separation of IN samples from WGN (measurement Types B and C only)
       10.8 Combining impulse trains to bursts (measurement Types B and C only)
       10.9 Separation of MMN pulses from atmospheric noise (measurement Type C only)
      10.10 Calculation of pulse parameter distribution (measurement Types B and C only)
                  10.10.1  Impulse/burst level
                  10.10.2  Impulse/burst length and period
                  10.10.3  Total impulse/burst time
11 Result presentation
       11.1 WGN measurements
       11.2 IN measurements
12 Limitations