CONTENTS

Policy on Intellectual Property Right (IPR)
1 Requirements
2 Connection transmitter and spectrum analyser
3 Measurement conditions
4 Adjustments of the spectrum analyser
5 Measurement instruction
6 Limits
7 Mask construction
1 General
        1.1 Definitions
Frequency deviation:
Instantaneous deviation:
Peak deviation:
Composite signal:
Modulation power (also called multiplex power):
0 dBr:
        1.2 Introduction
        1.3 Limits
        1.4 Observation time
2 Required conditions for measurements
        2.1 Required wanted-to-unwanted RF signal level ratio E_n/E_s at the measurement equipment
        2.2 Multipath propagation and distortion
        2.3 Wanted signal level at the receiver input
3 Characteristics of suitable measuring equipment
        3.1 Reflection measurements
        3.2 Frequency deviation measurements
        3.3     Modulation power measurements
 4     Result evaluation
5 Presentation of measurement results
        5.1 Modulation power
        5.2 Frequency deviation