CONTENTS - RECOMMENDATION ITU-R BT.1367-2 - Serial digital fibre transmission system for signals conforming to Recommendations ITU-R BT.656 , ITU-R BT.799 , ITU-R BT.1120 and ITU-R BT.2077 (Part 3)

Policy on Intellectual Property Right (IPR)
1     Introduction
2     Normative references
3     Optical transmission system specifications
        3.1     Physical packaging and connectors of transmitter and receiver units
        3.2     Transmitter unit for low-power (short-haul), medium-power (medium-haul) or high‑power (long-haul) links
        3.3     Transmitter unit labelling
        3.4     Receiver unit
        3.5     Receiver unit labelling
        3.6     Optical fibre circuit and connector specifications
                  3.6.1     Optical fibre type options
        3.7     Optical connector return loss
        A.1     Optical fibre and cable assemblies
        A.2     Optical connector components
       B.1      Tx and Rx unit selection criteria
        B.2     Multimode and single-mode fibre transmission characteristics
        B.3     E/O transducer digital signal processing limitation
        D.1     Power budget
        D.2     Dispersion
        D.3     Calculating Link Distance
        D.4     Single Mode link distance calculation
        D.5     Dispersion
        D.6     Multimode link distance calculation
        D.7     Intermodal Dispersion
        F.1     Time division multiplexing (TDM)
        F.2     Wavelength Division Multiplexing (WDM)