RECOMMENDATION ITU-R BT.1123 - Planning methods for 625-line terrestrial television in VHF/UHF bands
ANNEX 1 - Planning methods for terrestrial television in VHF/UHF bands
1 General
2 Theoretical techniques for an international plan
    2.1 General
    2.2 Implications of applying regular lattice planning principles in specific terrestrial television bands
    2.3 Band I
    2.4 Band III
    2.5 General comments on planning in VHF television bands
    2.6 The UHF band
3 Frequency offset plan
    3.1 General
    3.2 Non-precision offset
    3.3 Precision offset
    3.4 Offset distribution in precision offset operation
4 Capacity of the TV bands
    4.1 Capacity of the VHF bands
    4.2 Capacity of the UHF bands
5 Assessment of planned coverage
APPENDIX 1 TO ANNEX 1 - Lattice planning: basic principles for the development of geometrically regular lattices ...
1 Basic assumptions
2 Geometrically regular lattices
3 Linear channel-distribution schemes
4 Multiple coverage and channel grouping
5 Non-linear distributions
ANNEX 2 - Frequency planning constraints (625-line systems)
1 Introduction
2 Constraints introduced by television broadcast receivers
    2.1 Television receiver local-oscillator radiation
    2.2 Image channel
    2.3 Harmonics from VHF/FM receiver local-oscillators
    2.4 Harmonics and intermodulation products generated under overload conditions in receivers
3 Transmitting antenna system limitations
4 Conclusions for television planning procedures