CONTENTS

 PART 1 - Interfaces for HDTV signals conforming to Recommendation ITU-R BT.709, Part1
 1     Digital representation
        1.1     Coding characteristics
        1.2     Construction of digital signals
 2     Digital interface
        2.1     Video data
        2.2     Video timing relationship with analogue waveform
        2.3     Video timing reference codes (SAV and EAV)
        2.4     Ancillary data
        2.5     Data words during blanking
 3     Bit-parallel interface
        3.1     Clock signal and clock-to-data timing relationship
        3.2     Electrical characteristics of the interface
        3.3     Mechanical characteristics
                  3.3.1     Connector
                  3.3.2     Interconnecting cable
 4     Bit-serial interface
        4.1     Data format
                  4.1.1     Video data
                  4.1.2     Video timing reference codes
                  4.1.3     Line number data
                  4.1.4     Error detection codes
                  4.1.5     Ancillary data
                  4.1.6     Blanking data
        4.2     Transmission format
                  4.2.1     Word-multiplexing
                  4.2.2     Serializing
                  4.2.3     Channel coding
                  4.2.4     Serial clock
                  4.2.5     Bit-serial digital check field
        4.3     Coaxial cable interfaces
                  4.3.1     Line driver characteristics (source)
                  4.3.2     Line receiver characteristics (destination)
                  4.3.3     Transmission line characteristics
                  4.3.4     Connector
        4.4     Optical fibre interfaces
 PART 2 - Interfaces for HDTV signals conforming to Recommendation ITU-R BT.709, Part2
 1     Digital representation
        1.1     Coding characteristics
        1.2     Construction of digital signals
 2     Digital interface
        2.1     Video data
        2.2     Video timing relationship with analogue waveform
        2.3     Video timing reference codes SAV and EAV
        2.4     Ancillary data
        2.5     Data words during blanking
 3     Bit-parallel interface
        3.1     Clock signal and clock-to-data timing relationship
        3.2     Electrical characteristics of the interface
        3.3     Mechanical characteristics (see Note 1)
                  3.3.1     Connector
                  3.3.2     Interconnecting cable
 4     Bit-serial interface
        4.1     Data format
                  4.1.1     Video data
                  4.1.2     Video timing reference codes
                  4.1.3     Line number data
                  4.1.4     Error detection codes
                  4.1.5     Ancillary data
                  4.1.6     Blanking data
        4.2     Transmission format
                  4.2.1     Word-multiplexing
                  4.2.2     Serializing
                  4.2.3     Channel coding
                  4.2.4     Serial clock
                  4.2.5     Bit-serial digital check field
        4.3     Coaxial cable interfaces
                  4.3.1     Line driver characteristics (source)
                  4.3.2     Line receiver characteristics (destination)
                  4.3.3     Transmission line characteristics
                  4.3.4     Connector
        4.4     Optical fibre interfaces
Annex 1  Bit-serial digital checkfield for use in the HDTV digital interfaces
 1     Scope
 2     General considerations
 3     Checkfield data
 4     Serial digital interface (SDI) checkfield