Policy on Intellectual Property Right (IPR)
1 Introduction
1.1 Data communication over electrical power lines
2 Fundamental elements related with radio-frequency radiations from PLT
systems
2.1 Introduction
2.2 Differential-mode and common-mode currents
2.3 Generation of common-mode current
2.4 Folded-dipole antenna effect of a switch branch
2.5 Shielding effectiveness of exterior walls of a house
2.6 Leakage from an in-house power line to service wires outside
the house
3 Radio system characteristics, protection criteria, and impact of PLT
systems on radiocommunication systems
3.1 Broadcasting
3.1.1 General characteristics of analogue LF, MF and HF
broadcasting
3.1.2 General characteristics of DRM digital LF, MF and
HF broadcasting
3.1.3 LF, MF, HF and VHF radio broadcasting frequency
ranges
3.1.4 Protection criteria and acceptable interference
3.2 Amateur and amateur satellite
3.2.1 General characteristics
3.2.2 Amateur frequency allocations
3.2.3 The protection requirements of the HF amateur radio
service
3.3 Aeronautical mobile and radionavigation
3.3.1 Results
3.4 General protection criteria considerations HF fixed and land
mobile
3.4.1 Protection criteria and protection requirement
3.4.2 A possible protection criteria
3.4.3 Automatic link establishment systems
3.5 Maritime mobile
3.5.1 Background
3.5.2 Frequencies allocated for maritime communications
3.5.3 Receiver parameters for the maritime mobile service
in MF and HF bands
3.5.4 Hyperbolic radionavigation systems
3.5.5 LF/MF maritime radionavigation beacons
3.6 Radiolocation
3.6.1 Oceanographic radar systems in the bands 3-50 MHz
3.6.2 System characteristics
3.7 Fixed
3.7.1 Fixed system characteristics
3.7.2 Protection criteria
3.8 Radio astronomy
3.9 Standard frequency and time
4 Potential means for preventing or eliminating interference
4.1 Mitigation factors and methods for power line communications
4.1.1 Attenuation of conducted signals
4.1.2 Frequency band exclusions
4.1.3 Geographical exclusion zones
4.1.4 Consultation area requirements
4.1.5 Adaptive interference techniques
4.1.6 Interference complaint procedures
4.1.7 PLT operator database
4.2 Studies of mitigation techniques
4.2.1 Study of mitigation techniques in Brazil
4.2.2 Intermodulation effects on the depth of spectrum
notches in PLT systems
5 Overall conclusions
Annex 1 Noise, radiation and propagation considerations
A1 Noise, radiation and propagation considerations
A1.1 Noise level in the HF band
A1.1.1 The ambient noise environment
A1.1.2 Measuring the ambient noise floor
A1.1.3 Determination of the noise level
A1.1.4 Long-term man-made noise measurements in Germany
A1.2 Propagation mechanisms
A1.2.1 Near-field and ground-wave propagation
A1.2.2 Sky wave propagation
A1.2.3 Examples of propagation calculations and studies
Annex 2 Analyses of potential interference
A2 Analyses of potential interference
A2.1 A modelling analysis for the radio astronomy service
A2.1.1 Uses of HF bands by the RAS
A2.1.2 Separation distances between a RA antenna and a
PLT system in the HF region
a) Direct path calculation
b) Ionospheric propagation
A2.1.3 Discussion
A2.1.4 Conclusions
A2.2 Overview of power line telecommunication systems interference
to the broadcasting service
A2.2.1 Introduction
A2.2.2 Interference effects into low VHF television
A2.2.3 Interference effects into the HF band
A2.2.4 Summary and conclusions
A2.3 Effects of interference from PLT into the broadcasting service
below 30 MHz
A2.4 Methodology for calculation of cumulative HF skywave
interference from power line telecommunication systems
A2.4.1 Governmental skywave interference example into
Winnipeg, Canada
Cumulative PLT tool execution within MATLAB is shown below:
A2.4.2 NTIA study on ionospheric propagation and aggregation
of Access PLT emissions
A2.4.3 Results on calculation of cumulative HF sky-wave
interference caused by power line telecommunication systems
1 Power radiated from a single PLT system
2 Cumulative treatment of distributed PLT systems
3 Calculation of the cumulative field strength distribution through HF
sky-wave propagation
A2.4.4 Compatibility study results between the radio
astronomy observations in the HF band and cumulative HF sky-wave interference
caused by in-house power line telecommunication systems
A2.5 Experimental results of the subjective assessment test on HF
analogue broadcast reception interfered with by PLT
A2.5.1 Test methods
A2.5.2 Test results
A2.5.3 Test equipment
A2.6 Compatibility analysis regarding protection requirements of HF
aeronautical mobile radio in relation to PLT in-house devices
A2.6.1 Introduction
A2.6.2 Study assumptions
A2.6.3 Compatibility model/geometrical computation
A2.6.4 Evaluation threshold for the aeronautical radio
A2.6.5 Results of the analysis
A2.6.6 Other determinants
A2.6.7 Requirements toward PLT devices for protecting the
HF aeronautical mobile service
Annex 3 Radio frequency emissions from PLT systems
A3 Radio frequency emissions from PLT systems
A3.1 Measurement of access PLT non intentional radiated RF levels on
HF bands
A3.1.1 Introduction
A3.1.2 Objective
A3.1.3 Interference concept
A3.1.4 Test description
A3.1.5 Comments
A3.1.6 Possible mitigation technique
A3.1.7 Conclusions
A3.2 Measurements of the radiated emissions from in-house power line
telecommunications devices into the residential environment in Canada
A3.2.1 Introduction
A3.2.2 Conducted power measurement – Test procedure and
results
A3.2.3 Field strength measurements – Procedure and
results
A3.2.4 Conclusions
A3.3 Measurement results of the radiated emissions from in-house
power line telecommunications systems into the residential environment in the
test conducted in Japan
A3.3.1 Introduction
A3.3.2 Measurement method
A3.3.3 Condition of PLT communication
A3.3.4 Measurement result
A3.4 Measurement results of leaked emissions by access PLT system in
the HF and the UHF bands
A3.4.1 Introduction
A3.4.2 Field experiment at Mt. Akagi, Japan, in July 23,
2002
A3.4.3 Leaked emissions in the HF band
A3.4.4 Spurious emission in the UHF band
A3.4.5 Comparison of the PLT noise level with
Recommendation ITU-R RA.769 at 327 MHz
A3.4.6 Conclusions
A3.5 Distance separation measurements
A3.5.1 Distance separation measurements in Brazil
A3.5.2 Distance separation measurements in Canada
A3.5.3 Distance dependence of the leaked electric field
caused by in-house PLT systems separation measurement in Japan
A3.6 Impact on radioastronomy observations by leaked radiation
caused by in-house PLT systems
A3.6.1 Introduction
A3.6.2 Radio noise environment at the measurement
location
A3.6.3 Measurement
A3.6.4 Measured data
A3.6.5 Assessment of the PLT disturbance through
comparison with Rec. ITU-R RA.769
A3.6.6 Mitigation of PLT disturbance against
radio-astronomy observations in the HF band
A3.6.7 Conclusions
Appendix 1 to Annex 3 Measurements of EM radiation from in-house PLT devices
operating in a residential environment – Field Test Report
Annex 4 Design examples of PLT technology
A4 Design examples of PLT technology
A4.1 Examples of a PLT network topology
A4.2 General design considerations
A4.2.1 Media access control
A4.2.2 Repeaters
A4.2.3 Multiplexing and multiple access approaches
A4.2.4 Distance
A4.3 PLT network architectures on MV distribution lines
A4.4 PLT network architectures on low voltage distribution lines
A4.4.1 Low density PLT network topology
A4.4.2 High density PLT network topologies
A4.4.3 PLT star network topology
A4.4.4 PLT tree network topology
A4.4.5 PLT multi-floor network topology