CONTENTS

Policy on Intellectual Property Right (IPR)
Keywords
 1     Introduction
 2     Results and conclusions
 3     Conclusions
 4     Glossary of terms
Annex 1  Description and measurement of picture failure thresholds used for DVB‑T and DVB‑T2 TV receiver performance measurements in static channel conditions
 1     Introduction
a)     Ref BER – (used in many specifications including DVB‑T EN 300 744, Nordig, IEC 62216 E‑Book, DTG D-book, – see ref. 1‑4)
b)     QMP2 (Used in the Nordig test specification (see Reference 2) for DVB‑T/T2)
c)     SFP or PF subjective failure point or picture failure point (used in the UK DTG D‑book and ITU‑R BT.2033 (see Reference 6) for DVB‑T/T2)
d)     ESR5 errored second ratio 5% (used in IEC 62002 MBRAI specification for mobile receivers (see Reference 7))
 2     Test setup for DVB‑T
 3     Test procedure for DVB‑T
 4     Receiver tested
 5     Test results for DVB‑T
 6     Test setup for DVB-T2
 7     Test procedure for DVB‑T2
 8     Test results for DVB‑T2
 9     References
Annex 2  Description and measurement of picture failure thresholds used for ATSC TV receiver performance measurements in static and dynamic channel conditions
 1     Introduction
 2     Test setup for ATSC
 3     Test procedure for ATSC
        3.1     Relationship between visual SFP and BER for ATSC
        3.2     Definition of visual SFP for ATSC
        3.3     Determination of visual SFP for ATSC
 4     Test results for ATSC
 5     Conclusion
 6     References