Policy on Intellectual Property Right (IPR)
1 Executive summary
2 Abbreviations
3 Useful definitions
3.1 Radio frequency
signal-to-interference ratio (S/I)
3.2 Radio frequency
protection ratio (PR)
3.3 Receiver (front-end)
overload threshold
3.4 Adjacent channel
leakage power ratio
3.5 “Can” tuners
3.6 “Silicon” tuners
4 References
4.1 Broadcasting
technology characteristics
4.2 Mobile technology
characteristics
5 Measurement methodology
5.1 Example test setup
5.2 Wanted signal levels
5.3 Frequency offsets
between interfering signal and wanted signal
5.4 Measurements in the
presence of a time varying interfering signal
5.5 UMTS uplink
5.6 LTE – downlink
5.7 LTE – uplink
5.8 Interferer reference
power level
5.9 Characterization of
the interfering signal
5.10 Failure point
assessment methods
5.10.1 ESR5
Criterion for the Assessment of DTT Transmission Quality
5.11 Method for determining
protection ratios and overload thresholds
6 Conclusions and further work
required
A.1.1 Measurements
of protection ratios and overload thresholds for DVB-T receivers under
interference from DVB-T in adjacent channels
A.1.2 Measurements
of protection ratio and overload threshold for DVB-T receivers under
interference from UMTS BS and UE in co- and adjacent channels
A.1.3 Measurements
of protection ratios and overload thresholds for DVB-T receivers under
interference from LTE BS and UE in co- and adjacent channels
A.2.1 Measurements
of protection ratios and overload thresholds for DVB-T2 receivers under
interference from DVB-T2 in other channels
A.2.2 Measurements
of protection ratios and overload thresholds for DVB-T2 receivers under interference
from LTE BS in co- and adjacent channels
A.2.3 Measurements
of protection ratios and overload thresholds for DVB-T2 receivers under
interference from LTE UE in adjacent channels
A.2.4 Measurements
of protection ratios and overload thresholds for DVB-T2 receivers under
interference from wireless broadband access systems in co- and adjacent
channels
A.3.1 Measurements
of protection ratios and receiver desensitisation for ATSC receivers under
interference from ATSC on adjacent channels
A.3.2 Measurements
of protection ratios for ATSC receivers under interference from LTE BS in co-
and adjacent channels