Policy on Intellectual Property Right (IPR)
1 Executive summary
2 Abbreviations
3 Useful definitions
3.1 Radio frequency
signal-to-interference ratio (C/I)
3.2 Radio frequency
protection ratio (PR)
3.3 Receiver
(front-end) overload threshold
3.4 Adjacent channel
leakage power ratio
3.5 “Can” tuners
3.6 “Silicon” tuners
4 References
4.1 Broadcsasting
technology characteristics
4.2 Mobile technology
characteristics
5 Measurement methodology
5.1 Example test setup
5.2 Wanted signal
levels
5.3 Frequency offsets
between interfering signal and wanted signal
5.4 Measurements in
the presence of a time varying interfering signal
5.5 UMTS uplink
5.6 LTE – downlink
5.7 LTE – uplink
5.8 Interferer
reference power level
5.9 Characterization
of the interfering signal
5.10 Failure point
assessment methods
5.10.1 ESR5
Criterion for the Assessment of DTT Transmission Quality
5.11 Method for
determining protection ratios and overload thresholds
6 Conclusions and further
work required
Annex 1 DVB-T receiver performance in the presence of interfering
signals from DVB-T, UMTS, and LTE
A.1.1 Measurements
of protection ratios and overload thresholds for DVB-T receivers under
interference from DVB-T in adjacent channels
A.1.2 Measurements
of protection ratio and overload threshold for DVB-T receivers under
interference from UMTS BS and UE in co- and adjacent channels
A.1.3 Measurements
of protection ratios and overload thresholds for DVB-T receivers under
interference from LTE BS and UE in co- and adjacent channels
Annex 2 DVB-T2 receiver performance in the presence of interfering
signals from DVB-T2 and LTE
A.2.1 Measurements
of protection ratios and overload thresholds for DVB-T2 receivers under
interference from DVB-T2 in other channels
A.2.2 Measurements
of protection ratios and overload thresholds for DVB-T2 receivers under
interference from LTE BS in co- and adjacent channels
A.2.4 Measurements
of protection ratios and overload thresholds for DVB-T2 receivers under
interference from wireless broadband access systems in co- and adjacent
channels
Annex 3 ATSC receiver performance in the presence of interfering
signals from ATSC
A.3.1 Measurements
of protection ratios and receiver desensitisation for ATSC receivers under
interference from ATSC on adjacent channels