Policy on Intellectual Property Right (IPR)
1 Introduction
2 Reception modes
2.1 Fixed reception
2.2 Portable reception
2.2.1 Portable indoor reception
2.2.2 Portable outdoor reception
2.2.3 Portable indoor/outdoor handheld reception (PI-H,
PO-H)
2.3 Mobile reception
2.3.1 Mobile handheld reception (MO-H)
3 Correction factors for field-strength predictions
3.1 Reference frequencies
3.2 Antenna gain
3.2.1 Antenna gain for fixed reception
3.2.2 Antenna gain for portable reception
3.2.3 Antenna gain for portable and mobile handheld
reception
3.2.4 Antenna gain for mobile reception
3.3 Feeder loss
3.4 Height loss correction factor
3.5 Building entry loss
3.6 Allowance for man-made noise
3.6.1 Allowance for man-made noise for fixed, portable
and mobile reception
3.6.2 Allowance for man-made noise for portable handheld
reception
3.7 Implementation loss factor
3.8 Correction factors for location variability
3.8.1 Distribution factor
3.8.2 Combined standard deviation
3.8.3 Combined location correction factor for protection
ratios
3.9 Polarization discrimination
3.10 Calculation of minimum median field-strength level
3.11 Calculation of minimum median field-strength level – integrated
method for 100 MHz band
4 Planning parameters for digital terrestrial broadcasting system DRM
robustness mode E in VHF Bands I, II and III
4.1 DRM system parameters
4.1.1 Modes and
code rates
4.1.2 Propagation-related OFDM parameters
4.1.3 Single frequency operation capability
4.1.4 Channel
models
4.2 DRM receiver parameters
4.2.1 General
characteristics
4.2.2 Receiver noise figure
4.2.3 Receiver
noise input power
4.2.4 Minimum
carrier to noise ratio
4.2.5 Minimum
receiver input power level
4.3 DRM planning
parameters
4.3.1 Minimum
median field-strength level
4.3.2 Position
of DRM frequencies
4.3.3 Out-of-band spectrum mask
4.3.4 Protection
ratios
4.3.5 Calculation
of the resulting sum field strength of interferers
5 Planning parameters for digital terrestrial broadcasting system RAVIS in VHF Bands I and II
5.1 System parameters of
RAVIS
5.1.1 RAVIS
signal parameters
5.1.2 SFN
operation capabilities
5.1.3 Channel
models
5.2 RAVIS radio receiver
related parameters
5.3 RAVIS planning
parameters
5.3.1 Minimum
median field-strength
5.3.2 Out-of-band emissions
5.3.3 Protection
ratios
5.3.4 Sharing
criteria with other services
6 Planning parameters for Digital System C (HD Radio) in VHF Band II
6.1 HD Radio system parameters
6.1.1 System configurations
6.1.2 Channel models and fading margins
6.2 HD Radio receiver parameters
6.2.1 Minimum C/N
6.2.2 Receiver integrated noise figure
6.3 HD Radio planning parameters
6.3.1 Minimum wanted field strength used for planning
7 Planning parameters for Digital System A (DAB) in VHF Band III
7.1 System parameters of DAB
7.1.1 Modulation scheme and guard interval
7.1.2 Transmission modes
7.1.3 Protection levels, coding and net bit rates
7.1.4 Channel models
7.1.5 SFN performance
7.2 Receiver parameters
7.2.1 Receiver noise figure
7.2.2 Minimum receiver signal input levels
7.3 Additional considerations for DAB planning
7.3.1 Coverage prediction height
7.3.2 Building and vehicle entry loss
7.3.3 Location percentages
7.4 Planning parameters
7.4.1 Minimum median field strength
7.4.2 Transmitter spectrum mask
7.4.3 DAB frequency block raster and bandwidth
7.4.4 Protection ratios
Annex 1 – Symbols and abbreviations
Annex 2 – Technical references
1 Position of DRM frequencies
1.1 VHF Band II
1.2 VHF Band III
2 Computations of correction
factors
2.1 Computation of the
antenna gain for portable handheld reception
2.2 Computation of
man-made noise allowance from the antenna noise factor
References