1.
|
Clear description of the referenced document:
|
|
Name:
|
IEEE Std 802.3bs-2017
|
Title:
|
IEEE Standard for Ethernet Amendment 10: Media Access Control Parameters, Physical Layers, and Management Parameters for 200 Gb/s and 400 Gb/s Operation
|
|
2.
|
Status of approval:
|
|
Approved on 6 December 2017
|
3.
|
Justification for the specific reference:
|
|
The references are required to define the mapping between the input bit stream and PAM4 optical symbols and back again, and also to define the TDECQ measurement method.
|
4.
|
Current information, if any, about IPR issues:
|
|
Information on patents related to IEEE Std 802.3 and its amendments can be found at http://standards.ieee.org/about/sasb/patcom/pat802_3.html
|
5.
|
Other useful information describing the "Quality" of the document:
|
|
The referenced standard has completed the rigorous and comprehensive review and approval process of the IEEE Standards Association.
|
6.
|
The degree of stability or maturity of the document:
|
|
The referenced standard has been reviewed via three stages of commenting involving a total of 1984 comments.
|
7.
|
Relationship with other existing or emerging documents:
|
|
Amendment to IEEE Std 802.3-2015
|
8.
|
Any explicit references within that referenced document should also be listed:
|
|
IEEE Std 802.3bs-2017 added the following normative references:/
ANSI/TIA-604-18:2015, FOCIS 18-Fiber Optic Connector Intermateability Standard-Type MPO-16/
IEC 61753-021-2:2007, Fibre optic interconnecting devices and passive components performance standard-Part 021-2: Grade C/3 single-mode fibre optic connectors for category C-Controlled environment./
IEEE Std 802.3-2015 includes the following normative references:/
ANSI T1.269-2000, Information Interchange-Structure and Representation of Trace Message Formats For The North American Telecommunications System./
ANSI T1.417-2001, Spectrum Management for Loop Transmission Systems./
ANSI T1.424-2004, Interface between networks and customer installations-Very-high Speed Digital Subscriber Lines (VDSL) Metallic Interface (DMT based)./
ANSI T1.601-1992, Telecommunications-Integrated Services Digital Network (ISDN)-Basic Access Interface for Use on Metallic Loops for Application on the Network Side of the NT (Layer 1 Specification)./
ANSI T1.605-1991, Telecommunications-Integrated Services Digital Network (ISDN)-Basic Access Interface for S and T Reference Point (Layer 1 Specification)./
ANSI X3.230-1994 (FC-PH), Information Technology-Fibre Channel-Physical and Signaling Interface./
ANSI X3.263-1995, Revision 2.2 (1 March 1995), FDDI Twisted Pair-Physical Medium Dependent (TP-PMD)./
ANSI/TIA-568-C.0-2010, Generic Telecommunications Cabling./
ANSI/TIA-568-C.2-2010, Copper Cabling Components./
ANSI/TIA-568-C.3-2008, Optical Fiber Cabling Components Standard./
ANSI/TIA/EIA-455-175A-92, Chromatic Dispersion Measurement of Single-Mode Optical Fibers by the Differential Phase-Shift Method./
ANSI/TIA/EIA-455-203-2001, Launched Power Distribution Measurement Procedure for Graded-Index Multimode Transmitters./
ANSI/TIA/EIA-455-204-2000, Measurement of Bandwidth on Multimode Fiber./
ANSI/TIA/EIA-568-A-1995, Commercial Building Telecommunications Cabling Standard./
ATIS-0600416.1999(R2010), Network to Customer Installation Interfaces-Synchronous Optical NETwork (SONET)-Physical Layer Specification: Common Criteria./
ATIS-0900105.2008, Synchronous Optical Network (SONET)-Basic Description including Multiplex Structure, Rates, and Formats./
CISPR 22: 1993, Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment./
EIA/JEDEC Standard EIA/JESD8-6, High Speed Transceiver Logic (HSTL), August 1995./
ETSI TS 101 270-1 (1999), Transmission and Multiplexing (TM); Access transmission systems on metallic access cables; Very high speed Digital Subscriber Line (VDSL); Part 1: Functional requirements./
IEC 60060 (all parts), High-voltage test techniques./
IEC 60068, Basic environmental testing procedures./
IEC 60096-1:1986, Radio-frequency cables, Part 1: General requirements and measuring methods and Amd. 2:1993./
IEC 60169-16:1982, Radio-frequency connectors, Part 16: R.F. coaxial connectors with inner diameter of outer conductor 7 mm (0.276 in) with screw coupling-Characteristic impedance 50 ohms (75 ohms) (Type N)./
IEC 60603-7:1990, Connectors for frequencies below 3 MHz for use with printed boards, Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality./
IEC 60793-1:1992, Optical fibres-Part 1: Generic specification./
IEC 60793-1:1995, Optical fibres-Part 1: Generic specification./
IEC 60793-1-41:2001, Optical fibres-Part 1-41: Measurement methods and test procedures-Bandwidth./
IEC 60793-1-42:2007, Optical fibres-Part 1-42: Measurement methods and test procedures-Chromatic dispersion./
IEC 60793-1-48:2007, Optical fibres-Part 1-48: Measurement methods and test procedures-Polarization mode dispersion./
IEC 60793-2:1992, Optical fibres-Part 2: Product specifications./
IEC 60793-2-10:2011, Optical fibres-Part 2-10: Product specifications-Sectional specification for category A1 multimode fibres./
IEC 60793-2-50:2008, Optical fibres-Part 2-50: Product specifications-Sectional specification for class B single-mode fibres./
IEC 60794-1:1993, Optical fibre cables-Part 1: Generic specification./
IEC 60794-1:1996, Optical fibre cables-Part 1: Generic specification./
IEC 60794-2:1989, Optical fibre cables-Part 2: Product specifications./
IEC 60794-2-11:2005, Optical fibre cables-Part 2-11: Indoor cables-Detailed specification for simplex and duplex cables for use in premises cabling./
IEC 60794-3-12:2005, Optical fibre cables-Part 3-12: Outdoor fibre cables-Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling./
IEC 60807-2:1992, Rectangular connectors for frequencies below 3 MHz, Part 2: Detail specification for a range of connectors with assessed quality, with trapezoidal shaped metal shells and round contacts-Fixed solder contact types./
IEC 60807-3:1990, Rectangular connectors for frequencies below 3 MHz, Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contacts-Removable crimp contact types with closed crimp barrels, rear insertion/rear extraction./
IEC 60825-1, Safety of laser products-Part 1: Equipment classification and requirements./
IEC 60825-2, Safety of laser products-Part 2: Safety of optical fibre communication systems (OFCS)./
IEC 60874-1:1993, Connectors for optical fibres and cables-Part 1: Generic specification./
IEC 60874-2:1993, Connectors for optical fibres and cables-Part 2: Sectional specification for fibre optic connector, Type F-SMA./
IEC 60874-10:1992, Connectors for optical fibres and cables-Part 10: Sectional specification, Fibre optic connector type BFOC/2,5./
IEC 60950:1991, Safety of information technology equipment./
IEC 60950-1, Information technology equipment-Safety-Part 1: General requirements./
IEC 61076-3-101:1997, Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications-Part 3: Rectangular connectors-Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1.27 mm × 2.54 mm centre-line./
IEC 61076-3-113, Ed. 1.0 (draft, 48B/1437/CD, 2 April 2004.) [48B Secretariat 1327] Connectors for electronic equipment-Part 3-113: Screened, serial multi-conductor cable to board connectors suitable for 10 Gbit/sec data rates./
IEC 61076-3-103 (48B/574/NP), Detail specification for rectangular connectors, with assessed quality, 6 and 8 way, fixed and free shielded connectors with ribbon contacts for high speed data applications./
IEC 61196-1:1995, Radio-frequency cables-Part 1: Generic specification-General, definitions, requirements and test methods./
IEC 61280-1-1:1998, Fibre optic communication subsystem basic test procedures-Part 1-1: Test procedures for general communication subsystems-Transmitter output optical power measurement for single-mode optical fibre cable./
IEC 61280-1-3:2010, Fibre optic communication subsystem test procedures-Part 1-3: General communication subsystems-Central wavelength and spectral width measurement./
IEC 61280-1-4:2003, Fibre optic communication subsystem test procedures-Part 1-4: General communication subsystems-Collection and reduction of two-dimensional nearfield data for multimode fibre laser transmitters./
IEC 61280-1-4:2009, Fibre optic communication subsystem test procedures-Part 1-4: General communication subsystems-Light source encircled flux measurement method./
IEC 61280-2-2:2008, Fiber optic communication sub-system basic test procedures-Part 2-2: Test procedures for digital systems-Optical eye pattern, waveform, and extinction ratio./
IEC 61280-4-1:2003, Fiber-optic communication subsystem test procedures-Part 4-1: Cable plant and links-Multimode fibre-optic cable plant attenuation measurement./
IEC 61280-4-1:2009, Fibre-optic communication subsystem test procedures-Part 4-1: Installed cable plant -Multimode attenuation measurement./
IEC 61280-4-2:2000, Fibre optic communication subsystem basic test procedures-Fibre optic cable plant-Single-mode fibre optic cable plant attenuation./
IEC 61753-1:2007, Fibre optic interconnecting devices and passive components performance standard-Part 1: General and guidance for performance standards./
IEC 61753-1-1:2000, Fibre optic interconnecting devices and passive components performance standard-Part 1-1: General and guidance-Interconnecting devices (connectors)./
IEC 61753-021-2:2002, Fibre optic passive component performance standard-Part 021-2: Fibre optic connectors terminated on single-mode fibre to category C Controlled environment./
IEC 61753-022-2, Performance standard-Part 022-2: Fibre optic connectors terminated on multimode fibre for Category C-Controlled environment, performance Class M./
IEC 61754-1:1996, Fibre optic interfaces -Part 1: General and guidance./
IEC 61754-4:1997, Fibre optic connector interfaces-Part 4: Type SC connector family./
IEC 61754-7, Fibre optic connector interfaces-Part 7: Type MPO connector family./
IEC 61754-7-1:2014, Fibre optic interconnecting devices and passive components-Fibre optic connector interfaces-Part 7-1: Type MPO connector family-One fibre row./
IEEE Std 1394™-1995 IEEE Standard for a High Performance Serial Bus./
IEEE Std 802®, IEEE Standards for Local and Metropolitan Area Networks-Overview and Architecture./
IEEE Std 802.1AB™-2009, IEEE Standard for Local and metropolitan area networks-Station and Media Access Control Connectivity Discovery./
IEEE Std 802.1D™, IEEE Standard for Local and metropolitan area networks-Media Access Control (MAC) Bridges./
IEEE Std 802.1F™-1993, IEEE Standard for Local and Metropolitan Area Networks-Common Definitions and Procedures for IEEE 802 Management Information./
IEEE Std 802.1Q™, Standard for Local and Metropolitan Area Networks-Bridges and Bridged Networks./
IEEE Std 802.3.1™, IEEE Standard for Management Information Base (MIB) Module Definitions for Ethernet./
IEEE Std 802.5v™-2001, IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements. Part 5: Token Ring Access Method and Physical Layer Specifications. Amendment 5: Gigabit Token Ring Operation./
IEEE Std 802.9a™-1995, Local and Metropolitan Area Networks-802.9 Supplement-IEEE Standard Specification of ISLAN 16-T (Supplement to 802.9-1994.)./
IETF RFC 3621 (December 2003), Power Ethernet MIB, Berger, A., and Romascanu, D./
IETF RFC 4836 (April 2007), Definitions of Managed Objects for IEEE 802.3 Medium Attachment Units (MAUs), Beili, E./
ISO/IEC 8802-2:1998, Information technology-Telecommunications and information exchange between systems-Local and metropolitan area networks-Specific requirements-Part 2: Logical link control./
ISO/IEC 7498-1:1994, Information technology-Open Systems Interconnection-Basic Reference Model: The Basic Model./
ISO/IEC 7498-4:1989, Information processing systems-Open Systems Interconnection-Basic Reference Model-Part 4: Management Framework./
ISO/IEC 8824:1990, Information technology-Open Systems Interconnection-Specification of Abstract Syntax Notation One (ASN.1)./
ISO/IEC 9314-1:1989, Information processing systems-Fibre Distributed Data Interface (FDDI)-Part 1: Token Ring Physical Layer Protocol (PHY)./
ISO/IEC 9314-2:1989, Information processing systems-Fibre Distributed Data Interface (FDDI)-Part 2: Token Ring Media Access Control (MAC)./
ISO/IEC 9314-3:1990, Information processing systems-Fibre Distributed Data Interface (FDDI)-Part 3: Physical Layer Medium Dependent (PMD)./
ISO/IEC 9646-1:1994, Information technology-Open Systems Interconnection-Conformance testing methodology and framework-Part 1: General concepts./
ISO/IEC 9646-2:1994, Information technology-Open Systems Interconnection-Conformance testing methodology and framework-Part 2: Abstract test suite specification./
ISO/IEC 10040:1992, Information technology-Open Systems Interconnection-Systems management overview./
ISO/IEC 10165-2:1992, Information technology-Open Systems Interconnection-Structure of management information: Definition of management information./
ISO/IEC 10165-4:1992, Information technology-Open Systems Interconnection-Management information services-Structure of management information-Part 4: Guidelines for the definition of managed objects./
ISO/IEC 11801:1995, Information technology-Generic cabling for customer premises./
ISO/IEC 11801:2002, Information technology-Generic cabling for customer premises./
ISO/IEC 11801:2002 Amendment 1:2008, Information technology-Generic cabling for customer premises./
ISO/IEC 11801:2002 Amendment 2:2010, Information technology-Generic cabling for customer premises./
ISO/IEC 15802-1:1995, Information technology-Telecommunications and information exchange between systems-Local and metropolitan area networks-Common specifications-Part 1: Medium Access Control (MAC) service definition./
ISO/IEC TR 24750:2007, Information technology-Assessment and mitigation of installed balanced cabling channels in order to support of 10GBASE-T./
ITU-T Recommendation G.650.1, 2010-Definitions and test methods for linear, deterministic attributes of single-mode fibre and cable./
ITU-T Recommendation G.652, 2009-Characteristics of a single-mode optical fibre and cable./
ITU-T Recommendation G.657, 2009-Characteristics of a bending-loss insensitive single-mode optical fibre and cable for the access network./
ITU-T Recommendation G.671, 2009-Transmission characteristics of optical components and subsystems./
ITU-T Recommendation G.691, 2006-Optical interfaces for single channel STM-64 and other SDH systems with optical amplifiers./
ITU-T Recommendation G.694.1-Spectral grids for WDM applications: DWDM frequency grid./
ITU-T Recommendation G.694.2-Spectral grids for WDM applications: CWDM wavelength grid./
ITU-T Recommendation G.695, 2010-Optical interfaces for coarse wavelength division multiplexing applications./
ITU-T Recommendation G.957, 2006-Optical interfaces for equipments and systems relating to the synchronous digital hierarchy./
ITU-T Recommendation G.959.1, 2009-Optical transport network physical layer interfaces./
ITU-T Recommendation G.975-Forward error correction for submarine systems./
ITU-T Recommendation G.991.2, 2001-Amendment 1./
ITU-T Recommendation G.991.2, 2001-Single-pair high-speed digital subscriber line (SHDSL) transceivers./
ITU-T Recommendation G.993.1, 2003-Amendment 1./
ITU-T Recommendation G.993.1, 2001-Very high speed digital subscriber line foundation./
ITU-T Recommendation G.994.1, 2004-Handshake procedures for digital subscriber line (DSL) transceivers./
ITU-T Recommendation I.430, 1995-Basic user-network interface-Layer 1 specification./
ITU-T Recommendation O.150, 1996-General requirements for instrumentation for performance measurements on digital transmission equipment./
ITU-T Recommendation O.153, 1992-Basic parameters for the measurement of error performance at bit rates below the primary rate./
ITU-T Recommendation O.172, 2005-Jitter and wander measuring equipment for digital systems which are based on the synchronous digital hierarchy (SDH)./
MATLAB Matrix Laboratory Software./
SFF-8436, Rev 4.1, August 24, 2011, Specification for QSFP+ 10 Gbs 4X Pluggable Transceiver./
SFF-8642, Rev 2.7, February 26, 2010, Specification for Mini Multilane 12 Gbs 12X Shielded Connector./
TIA-455-127-A-2006, FOTP-127-A, Basic Spectral Characterization of Laser Diodes./
TIA TSB-155-A-2010, Guidelines for the Assessment and Mitigation of Installed Category 6 Cabling to Support 10GBASE-T.
|
9.
|
Qualification of
IEEE:
|
|
The IEEE was recognized under the provisions of ITU-T Recommendation A.5 on 1 November 1999. Qualifying information is on file with TSB.
|
10.
|
Other (for any supplementary information):
|
|
None
|
|