| Primary protector parameters for the surge protection of equipment Ethernet ports |
 |
Recommendation ITU-T K.117 specifies the common-mode, differential mode and common mode to differential mode conversion surge parameter and test circuit requirements of an Ethernet port primary protector. The preferred surge generator voltage levels are 2.5 kV, 6 kV and 12 kV, but the test circuits can be used for any surge voltage environmental. Power over Ethernet (PoE) feed requirements are also given. Ethernet signal performance parameters are not covered and standards such as [b-IEC 60603-7-7] may be used for this purpose.
This Recommendation should be used for the harmonization of existing or future specifications issued by Ethernet surge protective device (SPD) manufacturers, telecommunication equipment manufacturers, administrations or network operators. |
|
|
|
|
| Ed. |
ITU-T Recommendation |
Status |
Summary |
Table of Contents |
Download |
|
1
|
K.117 (12/2016)
|
In force
|
here
|
here
|
here
|
|
|
|
ITU-T Supplement
|
Title
|
Status
|
Summary
|
Table of contents
|
Download
|
|
K Suppl. 3 (10/2015)
|
ITU-T K.20, K.21, K.45, K.82 – Additional criteria to protect telecommunication cabling during a power cross event
|
In force
|
here
|
here
|
here
|
|
K Suppl. 8 (11/2017)
|
Resistibility analysis of 5G systems
|
In force
|
here
|
here
|
here
|
|
K Suppl. 9 (05/2019)
|
5G technology and human exposure to radiofrequency electromagnetic fields
|
In force
|
here
|
here
|
here
|
|
K Suppl. 10 (11/2017)
|
Analysis of electromagnetic compatibility aspects and definition of requirements for 5G mobile systems
|
In force
|
here
|
here
|
here
|
|
K Suppl. 13 (12/2021)
|
Radiofrequency electromagnetic field (RF-EMF) exposure levels from mobile and portable devices during different conditions of use
|
In force
|
here
|
here
|
here
|
|
K Suppl. 14 (09/2019)
|
The impact of RF-EMF exposure limits stricter than the ICNIRP or IEEE guidelines on 4G and 5G mobile network deployment
|
In force
|
here
|
here
|
here
|
|
K Suppl. 16 (10/2022)
|
Electromagnetic field compliance assessments for 5G wireless networks
|
In force
|
here
|
here
|
here
|
|
K Suppl. 19 (09/2019)
|
Electromagnetic field (EMF) strength inside underground railway trains
|
In force
|
here
|
here
|
here
|
|
K Suppl. 25 (05/2021)
|
ITU-T K.117 - Long reach single twisted-pair Ethernet resistibility testing
|
In force
|
here
|
here
|
here
|
|
K Suppl. 29 (07/2022)
|
Electromagnetic field strength inside and outside of electric vehicles using wireless power transfer technology
|
In force
|
here
|
here
|
here
|
|
K Suppl. 32 (06/2023)
|
Case studies of radio frequency- electromagnetic field (RF-EMF) assessment
|
In force
|
here
|
here
|
here
|
| Title |
Approved on |
Download |
|
Mitigation measures for telecommunication installations – Chapter 10
|
2006
|
here
|
|
Mitigation measures for telecommunication installations
|
2004
|
here
|
|
Earthing and bonding
|
2003
|
here
|
|
Guide to the use of ITU-T Publications produced by Study Group 5 aimed at achieving Electromagnetic Compatibility and Safety
|
2002
|
here
|
|
Earthing of telecommunication installations
|
1976
|
here
|
|
