Supplement 60 to ITU-T Y-series Recommendations (10/2021) Interpreting ITU-T Y.1540 maximum IP-layer capacity measurements
Summary
History
FOREWORD
Table of Contents
1 Scope
2 References
3 Definitions
     3.1 Terms defined elsewhere
     3.2 Terms defined in this Supplement
4 Abbreviations and acronyms
5 Conventions
6 Recommendation for use of Annex B (Type B) search algorithm
7 Example results requiring careful interpretation
     7.1 Measurement results that indicate a bimodal distribution of capacities
     7.2 Measurement results where packet losses occur independently of the send rate
8 Example of an ITU-T Y.1540 Annex B table of sending rates
     8.1 Example table
9 Test results of note post-dating the publication of [ITU-T Y.1540]
     9.1 New results on 5/100 DOCSIS access
     9.2 Comparison of measurement results with new tools
     9.3 Results on DOCSIS 3.1 gigabit downlink access
     9.4 Results with non-congestion-related loss on downlink access
10 Brief description of the udpst utility: an implementation of [BBF TR-471] and [ITU-T Y.1540]
     10.1 udpst results display
     10.2 udpst project location
Bibliography
<\pre>