1
Scope
2 References
3 Definitions
4 Abbreviations
5 Description
5.1 Application to interface structure
5.2 Capabilities supported by this
Recommendation
6 Operational requirements
6.1 Provision and withdrawal
6.2 Requirements on the originating
network side
6.3 Requirements on the destination
network side
7 Primitive definitions and state
definitions
7.1 Primitive definitions
7.2 State definitions
7.2.1 Call states
7.2.2 Bearer states
8 Coding requirements
8.1 Messages for separated call
control
8.1.1 ALERTING
8.1.2 CALL PROCEEDING
8.1.3 CONNECT
8.1.4 CONNECT ACKNOWLEDGE
8.1.5 RELEASE
8.1.6 RELEASE COMPLETE
8.1.7 CALL SETUP
8.1.8 STATUS
8.1.9 STATUS ENQUIRY
8.1.10 NOTIFY
8.2 Information elements
8.2.1 Message type
8.2.2 Call identifier
8.2.3 Call capability
9 Signalling procedures at the
coincident SB and TB reference point
9.1 Establishment of a separated call
at the originating interface
9.1.1 Call request
9.1.2 Invalid call control information
9.1.3 Call proceeding
9.1.4 Call confirmation indication
9.1.5 Call acceptance
9.1.6 Call rejection
9.2 Call establishment at the
destination interface
9.2.1 Incoming call request
9.2.2 Call confirmation
9.2.3 Call acceptance
9.2.4 Active indication
9.3 Call clearing
9.3.1 Exception conditions
9.3.2 Call clearing initiated by the
user
9.3.3 Clearing initiated by the network
9.3.4 Call clearing collision
9.3.5 Interaction between call control and bearer control
9.4 Restart procedures
9.5 Handling of error conditions
9.6 Error procedures with explicit
action indication
9.7 Notification procedures
10 Signalling procedures at the TB reference point
11 Interworking with other networks
12 Interactions with supplementary services
13 Parameter values
14 Dynamic description SDLs
Annex A – Additional procedures for pre-negotiation
(Optional)
Appendix I – Additional procedures for simultaneous
establishment of the first bearer with the call
I.1 State definitions
I.2 Coding requirements
I.2.1 Messages
I.3 Procedures
I.3.1 Simultaneous call and bearer establishment
I.3.2 First bearer clearing
I.3.3 Call clearing
Appendix II – Protocol model and related entities
II.1 Field of application
II.2 Call and Bearer control protocols
in the DSS2 architecture
II.3 Object identifiers
Appendix III – Guidelines for the use of the
instruction indicator
Appendix IV – Examples of message flows for separated
call and bearer control