1
Scope
2 References
3 Definitions
4 Abbreviations
5 Description
6 Operation requirements
6.1 Provision and withdrawal
6.2 Requirements at the originating
network side
6.3 Requirements at the terminating
network side
7 Primitives
8 Coding requirements
8.1 Modified message contents
8.1.1 CONNECT
8.1.2 SETUP
8.2 Information elements
8.2.1 End-to-end transit delay
8.2.2 Extended QoS parameters
9 Signalling procedures at the
coincident SB and TB reference point
9.1 Procedures at the originating
interface
9.1.1 QoS and traffic parameters selection procedures (originating interface)
9.1.2 Call/Connection acceptance (originating interface)
9.2 Procedures at the destination
interface
9.2.1 QoS and traffic parameter selection procedures (destination interface)
9.2.2 Call/Connection acceptance (destination interface)
10 Signalling procedures at the TB reference point
10.1 Procedures at the originating
interface
10.1.1 QoS and Traffic parameters
selection procedures (originating interface)
10.1.2 Call/Connection acceptance (originating interface)
10.2 Procedures at the destination
interface
10.2.1 QoS and Traffic parameter selection procedures (destination interface)
10.2.2 Call/Connection acceptance (destination interface)
11 Interworking with other networks
11.1 Interaction with entities which do
not support the Q.2965.2 capabilities
11.2 Interworking with N-ISDN 12 Interaction with supplementary services
13 Interaction with other DSS2 signalling capabilities
14 Timers
15 Dynamic description (SDLs)
Annex A -
Inclusion of QoS parameters
Annex B-Rules for
accumulation of cumulative transit delay
Appendix I-Guidelines for the
setting of the Instruction indicator