1 Scope
2
References
3
Definitions
4
Abbreviations
5
Description
6
Operational requirements
6.1 Provision and withdrawal
6.2 Requirements at the originating network side
6.3 Requirements at the terminating network side
7
Primitive and state definitions
7.1 Primitive definitions
7.2 Call states
8
Coding requirements
8.1 Messages
8.1.1 SETUP
8.2 Information elements
8.2.1 ATM traffic descriptor information
element
8.2.2 Broadband bearer capability information
element
9
Signalling procedures at the coincident SB and TB
reference point
9.1 Procedures applicable at the originating interface
9.1.1 Traffic parameter selection procedures
9.2 Procedures applicable at the destination interface
9.3 Handling of specific error conditions
10 Signalling procedures at the TB
reference point for interworking with private B-ISDNs
11 Interworking with other networks
11.1 Interaction with entities which do not support SBR2 and SBR3
11.2 Interworking with N-ISDN
12 Interactions with supplementary
services
13 Parameter and timer values
14 Dynamic description (SDLs)
Annex A – Valid combinations of bearer class, broadband transfer capability,
and ATM traffic descriptor parameters for the support of the SBR2 and SBR3 ATM
transfer capability
Annex B – Clarification on the support of SBR2 and SBR3 ATM transfer capabilities by this
Recommendation