1
Scope
2
References
3
Definitions
3.1
Term defined elsewhere
3.2
Terms defined in this Recommendation
4
Abbreviations and acronyms
5
Conventions
6
Configuration of aerial infrastructure
6.1
Aerial communication infrastructure on shared poles
7
General requirements for aerial infrastructure design
7.1
Clarification of optical fibre cables
7.2
Classification of site conditions
7.3
Safety and economic considerations
7.4
Management of ground height and offset distance
7.5
Loads applied to aerial infrastructure
8
Design of suspension wires
8.1
Materials
8.2
Selection of suspension wire type
8.3
Sag
9
Design of telecommunication poles
9.1
Materials
9.2
Embedded depth
9.3
Pole length
9.4
Classification
10
Design of guy-lines
10.1
Configuration
10.2
Installation angle of upper guy-lines
10.3 Classification
of upper guy-lines
10.4 Classification
of guy anchors
Appendix I – Relationship between sag and the length of suspension
wire
I.1
Introduction
I.2
Calculation of required suspension wire length
I.3
Calculation considering the change of temperature and load applied to
the wire