Rec. ITU-T K.100 (07/2019) - Measurement of radio frequency electromagnetic fields to determine compliance with human exposure limits when a base station is put into service
Summary
History
FOREWORD
Table of Contents
1 Scope
2 References
3 Definitions
     3.1 Terms defined elsewhere
     3.2 Terms defined in this Recommendation
4 Abbreviations and acronyms
5 Conventions
6 Assessment procedure
     6.1 General process
     6.2 Method based on the actual maximum transmitted power or EIRP
7 Equipment under test data collection
8 Simplified assessment procedures
9 Measurement area selection
10 Measurement
     10.1 Measurement equipment
     10.2 Measured quantity
     10.3 General exposure assessment
     10.4 Comprehensive exposure assessment
          10.4.1 Comprehensive assessment with frequency-selective equipment
          10.4.2 Comprehensive assessment with broadband equipment
     10.5 Exposure contribution of ambient sources
     10.6 Determination of the total exposure ratio
11 Uncertainty
Appendix I  Radio frequency field strength measurement equipment requirements
Appendix II  Guidance on comprehensive measurements for specific technologies
     II.1 Time division multiple access/frequency division multiple access technology
     II.2 Code division multiple access/wideband code division multiple access technology
     II.3 ODFM technology
Appendix III  Maximum exposure location for a base station in the line of sight
Appendix IV  Exposure limits
     IV.1 Introduction
     IV.2 General description of exposure limits
     IV.3 [b-ICNIRP] exposure limits
Appendix V  Averaging time reduction
     V.1 Introduction
     V.2 Rationale and methodology
     V.3 Results and discussion
Bibliography