Policy on Intellectual Property Right (IPR)
Annex 1
1
Introduction
2
Terms and definitions for the purpose of this Recommendation
2.1
Antenna diagram for fixed reception
2.2
Antenna factor
2.3
Assignment area
2.4
Bit error ratio
2.5
C/N
2.6
The term “covered”
2.7
The term “reception possible”
2.8
Coverage prediction
2.9
Crest factor
2.10
Guard interval
2.11
Height loss
2.12
Interfering field strength
2.13
Median
2.14
Minimum median field strength (Emed)
2.15
MFN
2.16
Minimum equivalent signal level
2.17
Minimum wanted (equivalent) field strength (Emin)
2.18
Network gain
2.19
Protection ratio
2.20
Quasi error-free reception
2.21
Receiving field strength
2.22
Receiving scenario
2.23
Reception channel
2.24
The GE06 Agreement
2.25
Self-interference inside an SFN
2.26
Single-frequency network
2.27
Standard deviation
2.28
Standard deviation of the spectral amplitudes (σsp)
2.29
σsp‑correction (Cσ)
2.30
Substitution transmitter
2.31
System variant
2.32
Wanted field strength
3
Measurement methods
3.1
Verifying the coverage prediction for fixed reception
3.1.1
Selection of measurement locations
3.1.2
Necessary measurement equipment
3.1.3
Measurement procedure
3.1.4
Evaluation of the results
3.1.5
Result presentation
3.2
Verifying the coverage prediction for portable reception
3.2.1
Measurement principle
Example:
3.2.2
Necessary measurement equipment
3.2.3
Measurement procedure
3.2.4
Evaluation of the results
3.2.5
Result presentation
3.3
Verifying the coverage prediction for mobile reception
Annex 2
1
Reception channel correction (σsp‑correction)
2
Location probability correction
3
Total correction for indoor coverage