ITU-T J Series Recommendations: New Documents

[ J.342 (04/11) ] - Objective multimedia video quality measurement of HDTV for digital cable television in the presence of a reduced reference signal

jeu, 08 f�v 2012 16:41:24 GMT

Summary

Recommendation ITU-T J.342 provides an objective video quality measurement method for high definition television (HDTV) when a reduced reference signal is available. The following list shows example applications that can use this Recommendation:

1)�� Interlaced video television streams over cable networks including those transmitted over the Internet using Internet Protocol.

2)�� Video quality monitoring at the receiver when side-channels are available.

3)�� Video quality monitoring at measurement nodes located between point of transmission and point of reception.

[ J.342 (04/11) ] - Objective multimedia video quality measurement of HDTV for digital cable television in the presence of a reduced reference signal

jeu, 08 f�v 2012 16:41:24 GMT

Summary

1)�� Interlaced video television streams over cable networks including those transmitted over the Internet using Internet Protocol.

2)�� Video quality monitoring at the receiver when side-channels are available.

3)�� Video quality monitoring at measurement nodes located between point of transmission and point of reception.

[ J.380.8 (11/11) ] - Digital program insertion - Advertising systems interfaces - General information service (GIS)

ven, 22 d�c 2011 14:17:44 GMT

Summary

This document describes the Digital Program Insertion Advertising Systems Interfaces' General Information Service (GIS) messaging and data type specification using XML, XML Namespaces, and XML Schema.

[ J.380.8 (11/11) ] - Digital program insertion - Advertising systems interfaces - General information service (GIS)

ven, 22 d�c 2011 14:17:44 GMT

Summary

[ J.380.7 (11/11) ] - Digital program insertion - Advertising systems interfaces - Message transport

ven, 22 d�c 2011 14:16:37 GMT

Summary

This document describes the Digital Program Insertion Advertising Systems Interfaces' transport protocols required for the exchange of messages defined in the individual parts of the J.380 Sub-series of Recommendations.

NOTE ‑ Security issues surrounding the transport protocols defined herein have been purposely omitted and are considered outside of the scope of this document.

[ J.380.7 (11/11) ] - Digital program insertion - Advertising systems interfaces - Message transport

ven, 22 d�c 2011 14:16:37 GMT

Summary

NOTE ‑ Security issues surrounding the transport protocols defined herein have been purposely omitted and are considered outside of the scope of this document.

[ J.380.6 (11/11) ] - Digital program insertion - Advertising systems interfaces - Subscriber information service (SIS )

ven, 22 d�c 2011 14:15:38 GMT

Summary

This document, ITU-T J.380.6, describes the Digital Program Insertion Advertising Systems Interfaces Subscriber Information Service (SIS) messaging and data type specification using XML, XML Namespaces, and XML Schema.

[ J.380.6 (11/11) ] - Digital program insertion - Advertising systems interfaces - Subscriber information service (SIS )

ven, 22 d�c 2011 14:15:38 GMT

Summary

[ J.380.5 (11/11) ] - Digital program insertion - Advertising systems interfaces - Placement opportunity information service

ven, 22 d�c 2011 14:14:15 GMT

Summary

This Recommendation defines the messaging protocol for the Placement Opportunity Information Service (POIS) consistent with other parts of the J.380 standard. A POIS holds, maintains, and retains descriptions of content Placement Opportunities (typically for advertisements) and the interface supports query and notification operations for those opportunities.

[ J.380.5 (11/11) ] - Digital program insertion - Advertising systems interfaces - Placement opportunity information service

ven, 22 d�c 2011 14:14:15 GMT

Summary

[ J.380.4 (11/11) ] - Digital program insertion - Advertising systems interfaces - Content information service

ven, 22 d�c 2011 14:13:03 GMT

Summary

ITU-T J.380.4 describes the Digital Program Insertion Advertising Systems Interfaces' Content Information Service (CIS) messaging and data type specification using XML, XML Namespaces, and XML Schema.

[ J.380.4 (11/11) ] - Digital program insertion - Advertising systems interfaces - Content information service

ven, 22 d�c 2011 14:13:03 GMT

Summary

[ J.380.3 (11/11) ] - Digital program insertion - Advertising systems interfaces - Ad management service (ADM) interface

ven, 22 d�c 2011 14:11:59 GMT

Summary

This document in conjunction with the ITU-T J.380.3 Extensible Markup Language (XML) schema document (i.e., the accompanying XSD document) defines the XML messages expressing placement opportunities, placement decisions, and placement related event data typically exchanged between an Ad Management Service (ADM) and an Ad Decision Service (ADS)

[ J.380.3 (11/11) ] - Digital program insertion - Advertising systems interfaces - Ad management service (ADM) interface

ven, 22 d�c 2011 14:11:59 GMT

Summary

[ J.380.2 (11/11) ] - Digital program insertion - Advertising systems interfaces - Core data elements

ven, 22 d�c 2011 14:10:51 GMT

Summary

This document describes the Digital Program Insertion Advertising Systems Interfaces' core messaging and data types using extensible mark-up language (XML), XML Namespaces, and XML Schema.

[ J.380.2 (11/11) ] - Digital program insertion - Advertising systems interfaces - Core data elements

ven, 22 d�c 2011 14:10:51 GMT

Summary

This document describes the Digital Program Insertion Advertising Systems Interfaces' core messaging and data types using extensible mark-up language (XML), XML Namespaces, and XML Schema.

[ J.380.1 (11/11) ] - Digital program insertion - Advertising systems interfaces, advertising systems overview summary

ven, 22 d�c 2011 14:09:44 GMT

Summary

This document, Part 1 of eight in the J.380 Sub-series of Recommendations, offers concepts applicable to all other J.380 parts, J.380.2 through J.380.8, leaving the normative details to the individual Recommendations.

[ J.380.1 (11/11) ] - Digital program insertion - Advertising systems interfaces, advertising systems overview summary

ven, 22 d�c 2011 14:09:44 GMT

Summary

[ J.603 (04/11) ] - Real-time transmission system for signals of an expanded hierarchy of large screen digital imagery using spatial image segmentation for parallel processing

mer, 18 oct 2011 10:51:24 GMT

Summary

Recommendation ITU-T J.603 specifies the function components required to configure a real-time expanded hierarchy of large screen digital imagery (exLSDI) transmission system using spatial image segmentation for parallel processing. The transmission system is designed to maintain conformance with the network service operator's requirements specified in Recommendation ITU‑T J.602. The system comprises of multiple video codec function units of any coding standards. The transmission system also enables flexible adaptation to arbitrary image resolution.

[ J.603 (04/11) ] - Real-time transmission system for signals of an expanded hierarchy of large screen digital imagery using spatial image segmentation for parallel processing

mer, 18 oct 2011 10:51:23 GMT

Summary

[ J.366.5 (07/07) ] - IP multimedia subsystem Cx and Dx interfaces; Signalling flows and message contents specification

mer, 30 ao� 2011 13:47:42 GMT

Summary

Recommendation ITU-T J.366.5 specifies:

1)�� The interactions between the HSS (home subscriber server) and the CSCF (call session control functions), referred to as the Cx interface.

2)�� The interactions between the CSCF and the SLF (server locator function), referred to as the Dx interface.

The Third Generation Partnership Project (3GPP) has developed the specification in a form optimized for the wireless environment. This Recommendation references the ETSI version of the 3GPP specification and specifies only the modifications necessary to optimize it for the cable environment.

[ J.366.5 (07/07) ] - IP multimedia subsystem Cx and Dx interfaces; Signalling flows and message contents specification

mer, 30 ao� 2011 13:47:42 GMT

Summary

Recommendation ITU-T J.366.5 specifies:

1)�� The interactions between the HSS (home subscriber server) and the CSCF (call session control functions), referred to as the Cx interface.

2)�� The interactions between the CSCF and the SLF (server locator function), referred to as the Dx interface.

[ J.366.10 (07/07) ] - Zh and Zn interfaces based on the Diameter protocol; Stage 3 specification

sam, 26 ao� 2011 10:40:26 GMT

Summary

Recommendation ITU-T J.366.10 defines the Diameter based implementation for bootstrapping Zh interface (BSF-HSS) and Dz interface (BSF-SLF) for HSS resolution for the BSF, and GAA application Zn interface (BSF-NAF) in generic authentication architecture (GAA). It contains procedures, message contents and coding. The procedures for bootstrapping and usage of bootstrapped security association are defined in 3GPP TS 33.220.

[ J.366.10 (07/07) ] - Zh and Zn interfaces based on the Diameter protocol; Stage 3 specification

sam, 26 ao� 2011 10:40:26 GMT

Summary

[ J.341 (01/11) ] - Objective perceptual multimedia video quality measurement of HDTV for digital cable television in the presence of a full reference

mer, 28 jui 2011 09:14:54 GMT

Summary

Recommendation ITU-T J.341 provides an objective perceptual video quality measurement method for HDTV when a full reference signal is available. The following list shows example applications that can use this Recommendation:

1)�� Potentially real-time, in-service quality monitoring at the source.

2)�� Remote destination quality monitoring when a copy of the source is available at the point of measurement.

3)�� Quality measurement for monitoring of a storage or transmission system that utilizes video compression and decompression techniques, either a single pass or a concatenation of such techniques.

4)�� Lab testing of video systems.

This Recommendation includes an electronic attachment containing several short high definition (HD) video sequences, their corresponding predicted mean opinion scores (MOS), and the predicted MOS for five HD databases available via VQEG.

[ J.705 (01/11) ] - IPTV client provisioning, activation, configuration and management interface definition

jeu, 25 mai 2011 10:04:56 GMT

Summary

Recommendation ITU-T J.705 describes the i-2 interface, identified in Recommendation ITU-T J.700, that enables the service client in the customer network to interface with the operations support systems (OSS) functions in the operator network to provision and manage the IPTV client functions in the customer network. Examples of OSS functions include client provisioning, activation, configuration, and management (PACM).

[ J.705 (01/11) ] - IPTV client provisioning, activation, configuration and management interface definition

jeu, 25 mai 2011 10:04:55 GMT

Summary

[ J.366.6 (07/07) ] - Specification of the Cx and Dx interfaces based on the Diameter protocol

ven, 21 avr 2011 10:15:16 GMT

Summary

Recommendation ITU-T J.366.6 defines a transport protocol for use in the IP multimedia (IM) core network (CN) subsystem based on Diameter.

This Recommendation is applicable to:

-�� the Cx interface between the I-CSCF/S-CSCF and the HSS, and

-�� the Dx interface between the I-CSCF/S-CSCF and the SLF.

[ J.366.6 (07/07) ] - Specification of the Cx and Dx interfaces based on the Diameter protocol

ven, 21 avr 2011 10:15:16 GMT

Summary

Recommendation ITU-T J.366.6 defines a transport protocol for use in the IP multimedia (IM) core network (CN) subsystem based on Diameter.

This Recommendation is applicable to:

-�� the Cx interface between the I-CSCF/S-CSCF and the HSS, and

-�� the Dx interface between the I-CSCF/S-CSCF and the SLF.

[ J.202 (08/10) ] - Harmonization of procedural content formats for interactive TV applications

jeu, 23 mar 2011 07:40:56 GMT

Summary

Recommendation ITU-T J.202 defines APIs, semantic guarantees and system aspects of platform behaviour for harmonized procedural content formats for interactive TV applications.

Since this Recommendation was approved in 2003, several procedural content formats for interactive TV applications developed by other standardization bodies have been updated or newly developed. Updated specifications include: DVB-GEM, DVB-MHP 1.0, DVB-MHP 1.1, DVB-MHP 1.2, OCAP-1.0, OCAP-1.1 and ARIB STD‑B23. Also, ATSC developed ACAP and ABNT has now developed GINGA-J.

The purpose of the third revision of this Recommendation is to harmonize the specifications with a wider variety of standards including GEM 1.2, ARIB-J, GINGA-J, DVB-MHP, ACAP and OCAP. To achieve this, the common core defined in this Recommendation consists of two sets of APIs; one related to core Java technology and another for broadcast extensions, to conform to either DVB‑GEM, from which several specifications are derived, or JavaDTV specification, which is the core of GINGA-J and functionally equivalent to DVB-GEM. Additional APIs specific to the standards listed above are included for information in the appendices, which are not included in the harmonized common core.

[ J.202 (08/10) ] - Harmonization of procedural content formats for interactive TV applications

jeu, 23 mar 2011 07:40:55 GMT

Summary

Recommendation ITU-T J.202 defines APIs, semantic guarantees and system aspects of platform behaviour for harmonized procedural content formats for interactive TV applications.

[ J.294 (09/10) ] - Residential gateway requirements for the support of broadcast and IP-based interactive services over cable television networks

mar, 14 mar 2011 09:44:42 GMT

Summary

Recommendation ITU-T J.294 describes objectives, requirements and functional architecture for a residential gateway (RG) supporting broadcast and IP-based interactive services over cable television networks. This Recommendation describes the requirements for the functional components which form logical entities of RG.

[ J.294 (09/10) ] - Residential gateway requirements for the support of broadcast and IP-based interactive services over cable television networks

mar, 14 mar 2011 09:44:42 GMT

Summary

[ J.340 (06/10) ] - Reference algorithm for computing peak signal to noise ratio of a processed video sequence with compensation for constant spatial shifts, constant temporal shift, and constant luminance gain and offset

mer, 08 f�v 2011 07:08:40 GMT

Summary

Peak signal to noise ratio (PSNR) is a useful benchmark for evaluating performance improvements of new objective perceptual video quality metrics. This PSNR calculation method in Recommendation ITU-T J.340 has the advantage of automatically determining the highest possible PSNR value for a given video sequence over the range of spatial and temporal shifts. Only one temporal shift is allowed for all frames in the entire processed video sequence (i.e., constant delay).

This Recommendation defines a full reference (FR) algorithm for computing both the calibration and PSNR estimations for a processed video sequence: peak signal to noise ratio with compensation for constant spatial shifts, constant temporal shift, and constant luminance gain and offset (PSNR_const). Since the PSNR_const algorithm only examines the Y luminance channel (as defined by Recommendation ITU-R BT.601-6) distortions in the CB and CR chrominance channels will not be detected by the algorithm of this Recommendation. The intent of this Recommendation is to define and facilitate a standardized PSNR metric for use by industry and standard organizations. Reference code and test vectors have been included to assure accurate and consistent implementation of this PSNR_const metric.

[ J.340 (06/10) ] - Reference algorithm for computing peak signal to noise ratio of a processed video sequence with compensation for constant spatial shifts, constant temporal shift, and constant luminance gain and offset

mer, 08 f�v 2011 07:08:40 GMT

Summary

[ J.366.4 (08/10) ] - IPCablecom2 IP Multimedia Subsystem (IMS): Session Initiation Protocol (SIP) and Session Description Protocol (SDP) - Stage 3 specification

jeu, 19 jan 2011 14:10:46 GMT

Summary

Recommendation ITU-T J.366.4 defines a call control protocol for use in the IP multimedia (IM) core network (CN) subsystem based on the session initiation protocol (SIP), and the associated session description protocol (SDP).

The Third Generation Partnership Project (3GPP) has developed the specification in a form optimized for the wireless environment. This Recommendation references the ETSI version of the 3GPP specification (ETSI TS 124 229 V6.9.0 (2005-12)) and specifies only the modifications necessary to optimize it for the cable environment.

[ J.366.4 (08/10) ] - IPCablecom2 IP Multimedia Subsystem (IMS): Session Initiation Protocol (SIP) and Session Description Protocol (SDP) - Stage 3 specification

jeu, 19 jan 2011 14:10:46 GMT

Summary

The Third Generation Partnership Project (3GPP) has developed the specification in a form optimized for the wireless environment. This Recommendation references the ETSI version of the 3GPP specification (ETSI TS 124 229 V6.9.0 (2005-12)) and specifies only the modifications necessary to optimize it for the cable environment.

[ J.366.7 (08/10) ] - IPCablecom2 IP Multimedia Subsystem (IMS): Access security for IP-based services

ven, 13 jan 2011 15:07:15 GMT

Published in English only

Summary

Recommendation ITU-T J.366.7 specifies the security features and mechanisms for secure access to the IM subsystem (IMS) for the 3G mobile telecommunication system as modified for use in cable networks.

[ J.366.7 (08/10) ] - IPCablecom2 IP Multimedia Subsystem (IMS): Access security for IP-based services

ven, 13 jan 2011 15:07:15 GMT

Published in English only

Summary

[ J.388 (08/10) ] - Real-time video and audio transmission system over IP networks

sam, 10 d�c 2010 09:21:28 GMT

Summary

Recommendation ITU-T J.388 defines a system for real-time video/audio transmission over an IP‑based network. The protocol of the system consists of session control and media transmission. Session control is based on the session initiation protocol (SIP), and for the use of SIP this Recommendation refers to Recommendation ITU‑T J.366.4. Several types of packet formats are defined for media transmission. With regard to codecs, this Recommendation provides some mandatory codecs and some optional ones. The system equipped with the protocol specified here can be used for bidirectional applications, such as video telephony, as well as unidirectional applications, such as video news gathering. Even in case of video news gathering, bidirectional transmission is often required for communication between a reporter in the field and the studio. In addition, the system is defined taking into account implementation complexity. Thus, a software-based embedded solution is also available, which requires less cost and a shorter development period than a hardware-based one.

[ J.388 (08/10) ] - Real-time video and audio transmission system over IP networks

sam, 10 d�c 2010 09:21:28 GMT

Summary

[ J.703 (03/10) ] - IPTV client control interface definition

mer, 23 nov 2010 13:26:49 GMT

Summary

Recommendation ITU-T J.703 defines the interface that enables the service client in the customer's network to send requests for content and application transport using Internet Protocol (IP) technology to the Internet Protocol Television (IPTV) service functions in the operator's network. Examples of IPTV content include digital video and audio programme content, including the metadata describing the programme content. Examples of IPTV requests include requests for broadcast or video on demand (VoD) content, requests to manipulate VoD content delivery (pause, play, rewind, etc.), and requests to record content for later viewing.

[ J.703 (03/10) ] - IPTV client control interface definition

mer, 23 nov 2010 13:26:48 GMT

Summary

[ J.366.3 (08/10) ] - IPCablecom2 IP Multimedia Subsystem (IMS): Stage 2 specification

jeu, 17 nov 2010 14:57:45 GMT

Summary

Recommendation ITU-T J.366.3 defines the stage-2 service description for the IP Multimedia Core Network Subsystem (IMS), which includes the elements necessary to support IP multimedia (IM) services. Recommendation ITU‑T I.130 describes a three-stage method for the characterization of telecommunication services, and Recommendation ITU‑T Q.65 defines Stage 2 of the method.

The Third Generation Partnership Project (3GPP) has developed the specification in a form optimized for the wireless environment. Recommendation ITU-T J.366.3 references the ETSI version of the 3GPP specification (ETSI TS 123 228 V6.12.0 (2005-12)) and specifies only the modifications necessary to optimize it for the cable environment.

[ J.366.3 (08/10) ] - IPCablecom2 IP Multimedia Subsystem (IMS): Stage 2 specification

jeu, 17 nov 2010 14:57:45 GMT

Summary

[ J.366.2 (08/10) ] - IPCablecom2 IP Multimedia Subsystem (IMS): Session handling - IM call model - Stage 2 specification

mar, 20 sep 2010 15:17:27 GMT

Summary

Recommendation ITU-T J.366.2 specifies the IP multimedia (IM) call model for handling of an IP multimedia session origination and termination for an IP multimedia subscriber. It includes interactions between an application server and IP multimedia sessions.

Recommendation ITU-T J.366.2 references the ETSI version of the 3GPP specification (ETSI TS 123 218 V6.3.0 (2005-03)) and specifies only the modifications necessary to optimize it for the cable environment. Additions are shown in blue underline and deletions ~~in red strikethrough~~.

[ J.366.2 (08/10) ] - IPCablecom2 IP Multimedia Subsystem (IMS): Session handling - IM call model - Stage 2 specification

mar, 20 sep 2010 15:17:27 GMT

Summary

[ J.249 (01/10) ] - Perceptual video quality measurement techniques for digital cable television in the presence of a reduced reference

sam, 03 sep 2010 15:01:24 GMT

Summary

Recommendation ITU-T J.249 provides guidelines on the selection of appropriate objective perceptual video quality measurement methods when a reduced reference signal is available. The following are example applications that can use this Recommendation:

1)�� Interlaced video television streams over cable networks including those transmitted over the Internet using Internet Protocol.

2)�� Some forms of Internet Protocol Television (IPTV) video payloads.

3)�� Video quality monitoring at the receiver when side-channels are available.

4)�� Video quality monitoring at measurement nodes located between the point of transmission and the point of reception.

[ J.249 (01/10) ] - Perceptual video quality measurement techniques for digital cable television in the presence of a reduced reference

sam, 03 sep 2010 15:01:24 GMT

Summary

1)�� Interlaced video television streams over cable networks including those transmitted over the Internet using Internet Protocol.

2)�� Some forms of Internet Protocol Television (IPTV) video payloads.

3)�� Video quality monitoring at the receiver when side-channels are available.

4)�� Video quality monitoring at measurement nodes located between the point of transmission and the point of reception.

[ J.200 (04/10) ] - Worldwide common core - Application environment for digital interactive television services

mar, 30 ao� 2010 10:01:55 GMT

Summary

Recommendation ITU-T J.200 identifies the structure, the origins and the specification sources for a harmonized environment, including a set of application programming interfaces (APIs) for interactive television services.